Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Fast genetic mapping in barley: case studies of cuticle mutants using RNA-sequencing

Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding.     

重庆地面最高气温与最大风速年极值的渐近分布

利用重庆1951-1990年间地面最高气温和1956-1990年间地面最大风速年极值的记录,采用韦伯分布和耿贝尔分布分别对其渐近分布进行拟合.通过统计推断,找出重庆地面最高气温和地面最大风速年极值遵循的最佳渐近分布--韦伯分布.     

王文升同志在全省国土资源工作座谈会暨全省土地调查工作会议上的讲话

同志们:这次全省国土资源工作座谈会,是经省政府同意召开的。主要任务是传达学习中央人口资源环境工作座谈会和全国国土资源厅长座谈会精神,围绕树立和落实科学发展观,研究部署当前国土资源重点工作。赵克志副省长对这次会议十分重视,亲自到会并将作重要讲话。我们一定要认真抓好贯彻落实。下面,根据省厅党组研究的意见,我讲三个方面的问题。一、深刻领会中央精神,把握大局,坚持以科学发展观指导国土资源工作全国“两会”期间,中央召开人口资源环境工作座谈会,胡锦涛总书记、温家宝总理在会上发表了重要讲话,全面阐述了科学发展观的深刻内涵…     

DISTRIBUTION OF 2-D MAGNETIC SADDLE POINTS AND MORPHOLOGY OF FLARE KERNELS IN SOLAR ACTIVE REGIONS

We extrapolated the 3-D fields above the photosphere, taking the observed photospheric magnetic fields in the active regions NOAA 6659 and 7321 as the boundary conditions of a linear force-free field model, and detected the singular points of the 2-D fields in a plane at the chromospheric level. These singular points can be described with the Poincaré index. Singular points with the index of +1 correspond to concentrations of magnetic flux, and those with the index of -1 to the saddle points in the plane. All of these singular points are connected by the lanes demarcating the 2-D magnetic cells in the plane. It has been confirmed that these saddle points are the intersections between separators and planes intersecting the 3-D fields. From comparisons between kernels of flares occurring in both regions and the saddle points, we found that there is a close morphological relationship between distributions of the saddle points and flare kernels. The main results are as follows: (a) The flare kernels tend to appear in areas with concentrating 2-D saddle points. (b) The morphology of the kernels is exactly confined by the lanes in the plane at chromospheric level. These facts seem favourable for the viewpoint that solar flares are closely related to magnetic separatrices and separators.     

小行星(360)Carlova自转参数的测定

小行星自转参数的资料不仅可以为小行星碰撞演化提供数据,还可以为太阳系的演化研究提供依据．利用云南天文台1米望远镜对主带碳类小行星(360)Carlova进行了新的CCD测光观测,结合前人的测光资料,利用Epoch-方法对(360)的自转参数进行了反演计算,得到该小行星自转的恒星周期为0．25780417±0．00000003天,自转轴的黄道坐标为(95°±3,°40°±1°)．新的结果与前人的结果相比较为一致,其精度稍高于以前的估算结果．     

SDSS J143030.22-001115.1： A Misclassified Narrow-line Seyfert 1 Galaxy with Flat X-ray Spectrum

We used multi-component profiles to model the Hβ and [OⅢ]λλ4959,5007 lines of SDSS J143030.22-001115.1, a narrow-line Seyfert 1 galaxy (NLS1) in a sample of 150 NLS1 candidates selected from the Sloan Digital Sky Survey (SDSS), Early Data Release (EDR). After subtracting the Hβ contribution from narrow line regions (NLRs), we found that its full width half maximum (FWHM) of broad Hβ line is nearly 2900km s~(-1) , significantly larger than the customarily adopted criterion of 2000 km s~(-1) . With its weak Fe Ⅱ multiples, we believe that SDSS J143030.22-001115.1 should not be classified as a genuine NLS1. When we calculate the virial black hole masses of NLS1s, we should use the Hβ linewidth after subtracting the NLR component.     

上扬子地台震旦系铅锌矿床类型及找矿方向

上扬子地台含铅锌矿地层主要为震旦系。震旦系在上扬子地台主要发育上统灯影组,次有下统陡山沱组。将上扬子地台震旦系铅锌矿床成因划分为一级为叠生矿床,二级为层控矿床,三级为热水沉积改造矿床和热水沉积再造矿床四级类型,该类型按铅锌比例进一步划分为富铅型、富锌型、铅锌共生型。研究区内最重要的铅锌矿床成因类型为南郑马元、会东大梁子铅锌矿为代表的富锌型。陕西南郑、紫阳—镇坪地区,湖北武当、神农架、黄陵地区,以及地台西缘的安宁河、甘洛—小江、峨边—寻甸等地区的震旦系是寻找铅锌矿的最有利地段。     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.