One hundred years of mountain hydrology in Switzerland by the WSL

In 1903 the Swiss Federal Research Institute WSL started its first forest hydrology measurements with the aim to deliver a sound scientific basis for the implementation of new forest legislation introduced in Switzerland in 1876. This legislation was triggered by several large floods that occurred in Switzerland, for which a major cause was widely seen as the poor condition of forests at that time. Consequently, hydrologic research at WSL first focused on the influence of forests on floods. In the second half of the 20th century, other hydrological issues such as water quality, snow hydrology and sediment transport complemented the hydrologic research at WSL. Some recent results of this work are presented in three papers joining this introductory paper to mark the 100th anniversary of hydrologic research at WSL. Copyright © 2006 John Wiley & Sons, Ltd.     

Limitations of the ferrozine method for quantitative assay of mineral systems for ferrous and total iron

The quantitative assay of clay minerals, soils, and sediments for Fe(II) and total Fe is fundamental to understanding biogeochemical cycles occurring therein. The commonly used ferrozine method was originally designed to assay extracted forms of Fe(II) from non-silicate aqueous systems. It is becoming, however, increasingly the method of choice to report the total reduced state of Fe in soils and sediments. Because Fe in soils and sediments commonly exists in the structural framework of silicates, extraction by HCl, as used in the ferrozine method, fails to dissolve all of the Fe. The phenanthroline (phen) method, on the other hand, was designed to assay silicate minerals for Fe(II) and total Fe and has been proven to be highly reliable. In the present study potential sources of error in the ferrozine method were evaluated by comparing its results to those obtained by the phen method. Both methods were used to analyze clay mineral and soil samples for Fe(II) and total Fe. Results revealed that the conventional ferrozine method under reports total Fe in samples containing Fe in silicates and gives erratic results for Fe(II). The sources of error in the ferrozine method are: (1) HCl fails to dissolve silicates and (2) if the analyte solution contains Fe³⁺, the analysis for Fe²⁺ will be photosensitive, and reported Fe(II) values will likely be greater than the actual amount in solution. Another difficulty with the ferrozine method is that it is tedious and much more labor intensive than the phen method. For these reasons, the phen method is preferred and recommended. Its procedure is simpler, takes less time, and avoids the errors found in the ferrozine method.     

The pathway of mercury in contaminated waters determined by association with organic carbon (Tagus Estuary,Portugal)

Reactive dissolved Hg (Hg_R), non-reactive dissolved Hg (Hg_NR), particulate Hg (Hg_P), dissolved organic C (DOC), particulate organic C (POC), salinity and other interpretative parameters were determined in water samples collected in the North Channel and in adjacent areas of the Tagus estuary (Portugal). Higher concentrations of both dissolved and particulate Hg in the North Channel indicate a pollution source and raise the possibility of Hg escaping to adjacent areas by tidal action. This transport was confirmed by the increase of Hg_R with salinity and Hg_NR with DOC, along a longitudinal axis paralleling the North Channel. Apparently, Hg leaving this channel is progressively complexed by inorganic and organic ligands. Near the mouth of the estuary, values decreased reflecting dilution with seawater. Moreover the Hg_P:POC ratio also increased seaward, suggesting mixing with Hg enriched particles that escaped the North Channel, or incorporation of dissolved Hg species in river-derived particles. These results suggest that the pathway of anthropogenic Hg in contaminated waters may be identified by their enrichment in organic matter, both in the dissolved and particulate fraction.     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.     

The Effect of Human Exclusion on the Population Structure of Key-Hole Limpets Fissurella crassa and F. limbata on the Coast of Central Chile

Abstract. We describe the basic ecology of two key-hole limpets, Fissurella crassa and Fissurella limbata , which are heavily harvested by coastal shellfishermen (mariscadores) at the rocky intertidal of central Chile. The ecological role of human predation on these species was assessed. Anthropic exclusion from a stretch of the rocky intertidal at Las Cruces (non-harvested area) for about two and a half years resulted in changes of the densities and size distributions of these fissurelid species as compared to populations in control zones (harvested area). Differential human predation generates, on key-hole limpets, responses of different intensities related to the accessibility of man to the mesohabitats (sheltered platforms, exposed platforms and vertical walls) and fringes of the intertidal (mid-low intertidal and Lessonia nigrescens fringe). Thus, size distributions and mean densities of both fissurelids differ widely between the harvested and non-harvested areas on both platform habitats but not on vertical walls. In the mid-low intertidal fringe, differences are greater than in the less accessible L. nigrescens intertidal fringe. Moreover, we discuss the way in which other species, directly harvested by mariscadores (i. e., the mollusc Concholepas concholepas) can affect the keyhole limpet populations of central Chile rocky shores. Finally, we highlight the ecological role of these limpets on the dynamics of intertidal ecosystems and how they can modify community landscape.     

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Modeling nonlinear seagrass clonal growth: Assessing the efficiency of space occupation across the seagrass flora

The clonal growth of 9 seagrass species was modeled using a simulation model based on observed clonal growth rules (i.e., spacer length, rhizome elongation rates, branching rates, branching angle) and shoot mortality rates for seagrass species. The results of the model confirmed the occurrence of complex, nonlinear growth of seagrass clones derived from internal dynamics of space occupation. The modeled clones progressed from a diffuse-limited aggregation (DLA), dendritic growth, identified with a guerrilla strategy of space occupation, to a compact (Eden) growth, comparable to the phalanx strategy of space occupation, once internal recolonization of gaps, left by dead shoots within the clone, begins. The time at which seagrass clones shifted from diffuse limited to compact growth was predictable from the branching angle and frequency of the species and varied from 1 yr to several decades among species. As a consequence the growth behavior and the apparent growth strategy of the species changes with the development of the clones. The results of the model demonstrate that the emergent complexity of seagrass clonal growth is contained within the simple set of growth rules that can be used to represent clonal growth.