Possibilities of GPS Kinematic Measurements for Geological Survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN(system of united trigonometric cadaster network) and Baa(the Baltic Sea after adjustment).Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points.Geodetic network was adjusted by two ways.     

On the Integrability of Limited-Area Numerical Weather Prediction Model ALADIN over Extended Time Periods

This note summarizes results of the first integration of regional numerical weather prediction model ALADIN in a climate mode. The ALADIN model, developed in an international cooperation led by Météo France, is operationally used for weather prediction. The grid step of the model is 12 km; the integration domain covers a major part of Europe. A one-month-long run has been performed with this model on observed boundary conditions (represented by assimilations by the global model ARPEGE). It is demonstrated that no excessive error is generated and accumulated in the model during the integration; hence the model is integrable for extended time periods and may serve a basis for a development towards a regional climate model.     

Sensitivity of sea ice to wind-stress and radiative forcing since 1500: a model study of the Little Ice Age and beyond

Three different reconstructed wind-stress fields which take into account variations of the North Atlantic Oscillation, one general circulation model wind-stress field, and three radiative forcings (volcanic activity, insolation changes and greenhouse gas changes) are used with the UVic Earth System Climate Model to simulate the surface air temperature, the sea-ice cover, and the Atlantic meridional overturning circulation (AMOC) since 1500, a period which includes the Little Ice Age (LIA). The simulated Northern Hemisphere surface air temperature, used for model validation, agrees well with several temperature reconstructions. The simulated sea-ice cover in each hemisphere responds quite differently to the forcings. In the Northern Hemisphere, the simulated sea-ice area and volume during the LIA are larger than the present-day area and volume. The wind-driven changes in sea-ice area are about twice as large as those due to thermodynamic (i.e., radiative) forcing. For the sea-ice volume, changes due to wind forcing and thermodynamics are of similar magnitude. Before 1850, the simulations suggest that volcanic activity was mainly responsible for the thermodynamically produced area and volume changes, while after 1900 the slow greenhouse gas increase was the main driver of the sea-ice changes. Changes in insolation have a small effect on the sea ice throughout the integration period. The export of the thicker sea ice during the LIA has no significant effect on the maximum strength of the AMOC. A more important process in altering the maximum strength of the AMOC and the sea-ice thickness is the wind-driven northward ocean heat transport. In the Southern Hemisphere, there are no visible long-term trends in the simulated sea-ice area or volume since 1500. The wind-driven changes are roughly four times larger than those due to radiative forcing. Prior to 1800, all the radiative forcings could have contributed to the thermodynamically driven changes in area and volume. In the 1800s the volcanic forcing was dominant, and during the first part of the 1900s both the insolation changes and the greenhouse gas forcing are responsible for thermodynamically produced changes. Finally, in the latter part of the 1900s the greenhouse gas forcing is the dominant factor in determining the sea-ice changes in the Southern Hemisphere.

Magmatic history and geophysical signature of a post-collisional intrusive center emplaced near a crustal-scale shear zone: the Plechý granite pluton (Moldanubian batholith,Bohemian Massif)

The Plechy pluton, southwestern Bohemian Massif, represents a late-Variscan, complexly zoned intrusive center emplaced near the crustal-scale Pfahl shear zone; the pluton thus provides an opportunity to examine the interplay among successive emplacement of large magma batches, magmatic fabric acquisition, and the late-Variscan stress field associated with strike-slip shearing. The magmatic history of the pluton started with the emplacement of the porphyritic Plechy and Haidmühler granites. Based on gravity and structural data, we interpret that the Plechy and Haidmühler granites were emplaced as a deeply rooted, ∼NE–SW elongated body; its gross shape and internal fabric (steep ∼NE–SW magmatic foliation) may have been controlled by the late-Variscan stress field. The steep magmatic foliation changes into flat-lying foliation (particularly recorded by AMS) presumably as a result of divergent flow. Magnetic lineations correspond to a sub-horizontal ∼NE–SW finite stretch associated with the divergent flow. Subsequently, the Třístoličník granite, characterized by steep margin-parallel magmatic foliation, was emplaced as a crescent-shaped body in the central part of the pluton. The otherwise inward-younging intrusive sequence was completed by the emplacement of the outermost and the most evolved garnet-bearing granite (the Marginal granite) along the southeastern margin of the pluton. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Possibilities of GPS kinematic measurements for geological survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN (system of united trigonometric cadaster network) and Baa (the Baltic Sea after adjustment). Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points. Geodetic network was adjusted by two ways.     

Trends and evolution of contamination in a well-dated water reservoir sedimentary archive: the Brno Dam, Moravia, Czech Republic

The sedimentary record from dams can provide important information about stratigraphy and pollution history of densely populated river basins. The Brno Dam is a small reservoir within the Morava River catchment (Czech Republic) accumulating lacustrine sediments since 1940 (dam filling). The stratigraphy of the dam sediments was studied using multiproxy stratigraphic analysis (X-ray densitometry, bulk magnetic susceptibility, diffuse spectral reflectance and cation-exchange capacity) of five sediment cores supported by ground-penetration radar sections. Concentrations of heavy metals were studied by X-ray fluorescence analysis. The thickness of the dam sediments decreases from 220 cm in the proximal part, near the feeder, to only 10 cm in the distal part, near the dyke. Sediments consist predominantly of finely-laminated silty sands, silts and clays. The sedimentation rate for the last ~22 years, inferred from ¹³⁷Cs dating, decreases from 4.2 cm per year in the proximal part of the dam to 0.29 cm per year in its distal part. Distinct long-term trends were found in the depth profiles of heavy metal concentrations. The heavy metal contents increase significantly after 1940 in all cores, with peak concentrations confined to layers deposited in the 1960s and 1980s. A decreasing trend occurred after 1989 (the decline in Czech heavy industry). The results also show that heavy metal contamination is dependent on lithology (hyperpycnal flow layers related to floods). Increased concentrations of phosphorus in the sediments indicate long-term eutrophication of the dam. Despite the recent decreasing trends in heavy metal concentrations the phosphorus contents remain high in recent years and have caused persisting problems with algal growth in the dam mentioned by previous authors.     

Origin and contrasting succession pathways of the Western Carpathian calcareous fens revealed by plant and mollusc macrofossils

Calcareous fens are unique environments whose history is almost unexplored. The radiocarbon dates of the basal layers of 49 undisturbed calcareous fens showed that in the Western Carpathians (central Europe) many of the extant fen sites originated fairly recently, with two peaks in the High Middle and Roman Ages, the former corresponding to human‐induced changes of the landscape. Conspicuous number of fens also appeared in the Lateglacial and later in the Bronze Age owing to suitable environmental conditions. The Lateglacial calcareous fens were of semi‐open character with coniferous trees, a heliophilous understorey, and mollusc communities composed of several snail species typical of glacial landscapes. We found wood of Taxus baccata in six localities between 7390 and 600 cal. a BP, suggesting that calcareous fens could have represented a refugial habitat for this red‐listed species during the middle Holocene. Using plant macrofossil and mollusc analyses of three representative profiles we illustrate the most common developmental types: (i) fens originating in the Lateglacial, having an open or semi‐open character during the whole Holocene; (ii) open fens originating as wooded wetlands; and (iii) open fens starting their development de novo in the late Holocene. Human activities were responsible for the formation of a high number of calcareous fens, especially in the Outer Western Carpathians, and became important drivers of fen biodiversity development. Only a few recently existing calcareous fens contain old sequences of calcareous deposits. They represent unique natural archives and harbour highly endangered relic populations of fen specialists, making their strict protection urgent.     

Magnetic induction applied to borehole deviation problems

Summary Geophysical principles have a very extensive and important application in borehole technologies. A special form of magnetometry for borehole deviation measurement in certain special cases of tunnelling and driving other underground workings is presented. The mutual position of boreholes arranged in groups, used for driving underground workings in water-bearing layers by freezing and grouting methods, is determined.     

Surface and sub‐surface Schmidt hammer rebound value variation for a granite outcrop

This study presents rock strength variations at granite outcrops and in subsurface vertical profiles in the Jizerské hory Mountains, Czech Republic. Schmidt hammer rebound values in subsurface profiles change gradually from the bedrock surface downward. An exponential relation has been observed between the R‐values and depth in rock outcrops to a depth of around 4·5 m. The exponential nature of the curve indicates that rock hardness increases more rapidly with depth in the uppermost 1?m section of the rock profile. A detailed study of rebound values obtained from both intact and polished rock exposures reveal effects of surface grinding on results of the Schmidt hammer method. The range of data collected increases after grinding, allowing more precise discrimination of rock surfaces in respect of age and weathering. The Schmidt hammer method may be used effectively as a relative‐age dating tool for rock surfaces that originated during the Late Pleistocene. It is concluded that this time limitation can be significantly mitigated by surface grinding before measurement. Copyright © 2010 John Wiley & Sons, Ltd.