Exposure of phytoplankton to ekofisk crude oil

Solutions of Ekofisk crude oil in sea water were prepared by slow stirring for 21h in a closed system. Headspace and GC/MS techniques were applied to establish dose composition and levels. The standardized test medium produced in a closed system contained approximately 14 mg oil per litre and was dominated by low molecular weight aromatic hydrocarbons and phenols.The toxicity of the standarized oil-containing medium to three marine diatoms was studied in a cage culture turbidostat and by conventional batch culture technique. The three algal species differed in sensitivity to the oil compounds, but showed identical ranking in both test systems.Standardized test medium diluted to 50% with respect to oil content stopped the growth of the most sensitive alga, Skeletonema costatum. For comparison naphthalene was applied and gave 50 % growth reduction at a concentration of 400 μg litre^?1. The growth of Chaetoceros ceratosporum was only slighty affected by the full strength standard test medium, which had no influence on the growth of Phaeodactylum tricornutum, the least sensitive organism. The presence of an oil layer on the surface of the standard test medium during the growth test greatly increased its toxicity and blocked completely the photosynthesis even of P. tricornutum after 4 days.     

What is good for the fishermen, is good for the nation: co-management in the Norwegian fishing industry in the 1990s

This paper analyses the concept of ‘co-management’ and tries to explain why co-management has recently become important to different types of fisheries administration. A preliminary analytical framework is sketched, before going on to describe the Norwegian co-management system, known as ‘centrally directed consultation’, where fishermen's representatives are established on a wide range of organisations that exert a direct influence on fisheries policy, including not only quota management but grant aid, sales, research and education. The final section is devoted to the lessons that may be learned from the Norwegian experience, bearing in mind the particular background of Norway and its historical setting.     

3rd International Energy Forum in Hamburg,Germany, 22–23 November 1990

Reports

3rd International Energy Forum in Hamburg, Germany, 22–23 November 1990Meeting of leading experts to discuss the role of the Energy Industries in the Europe of the Future     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

利用多波段分光仪观测生物有效UV辐射、臭氧总量和云的影响

该文介绍了一种利用紫外分光仪进行辐照度观测获取生物有效UV辐射、臭氧总量和云的光学厚度的方法。这些量是观测的辐照度与辐射传输计算相结合后测定的。该方法被用于具有 4个中心波长为 30 5、32 0、340和 380nm ,宽度为 10nm的 4波段分光仪。将这种仪器与高精度分光光度计在美国圣迭戈不同天气条件下进行了为期 1周的对比观测。当太阳天顶角 (SZA) <80°时 ,CIE 权重UV辐射剂量率的相对误差为 1.4± 3.2 %。晴天条件下 ,当SZA <80°时 ,相对误差为 0 .6± 1.5%。该仪器观测的辐照度推算的臭氧总量对云并不敏感。这种仪器还与Dobson和Brewer仪器在挪威奥斯陆进行了一年多的对比观测。整个观测期间 (包括有云的情况 )获得的臭氧总量相对误差为 0 .3± 2 .9%。当晴天和SZA <6 0°时 ,标准差减小到 1.9%。将仪器观测中所获得的臭氧总量和云的光学厚度输入到辐射传输模式 ,可以计算从 2 90～ 4 0 0nm分辨率为 1nm的整个光谱。这样计算的光谱与同时用高精度分光光度计观测的光谱在晴天及有云的条件下非常一致 ,所以 ,这种光谱可以用于测定任何作用光谱的辐射剂量率。而计算这种光谱只需要一个UV B通道和一个UV A通道     

Future ocean uptake of CO2: interaction between ocean circulation and biology

We discuss the potential variations of the biological pump that can be expected from a change in the oceanic circulation in the ongoing global warming. The biogeochemical model is based on the assumption of a perfect stoichiometric composition (Redfield ratios) of organic material. Upwelling nutrients are transformed into organic particles that sink to the deep ocean according to observed profiles. The physical circulation model is driven by the warming pattern as derived from scenario computations of a fully coupled ocean-atmosphere model. The amplitude of the warming is determined from the varying concentration of atmospheric CO₂. The model predicts a pronounced weakening of the thermohaline overturning. This is connected with a reduction of the transient uptake capacity of the ocean. It yields also a more effective removal of organic material from the surface which partly compensates the physical effects of solubility. Both effects are rather marginal for the evolution of atmospheric pCO₂. Running climate models and carbon cycle models separately seems to be justified. Received: 9 August 1995 / Accepted: 22 April 1996     

Modern modes of provenance and dispersal of terrigenous sediments in the North Pacific and Bering Sea: implications and perspectives for palaeoenvironmental reconstructions

During expedition 202 aboard the RV Sonne in 2009, 39 seafloor surface sediment sites were sampled over a wide sector of the North Pacific and adjoining Bering Sea. The data served to infer land–ocean linkages of terrigenous sediment supply in terms of major sources and modes of sediment transport within an over-regional context. This is based on an integrated approach dealing with grain-size analysis, bulk mineralogy and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy cluster analysis of mineralogical data). The findings on clay mineralogy served to update those of earlier work extracted from the literature. Today, two processes of terrigenous sediment supply prevail in the study area: far-distance aeolian sediment supply to the pelagic North Pacific, and hemipelagic sediment dispersal from nearby land sources via ocean currents along the continental margins and island arcs. Aeolian particles show the finest grain sizes (clay and fine silt), whereas hemipelagic sediments have high abundances of coarse silt. Exposed sites on seamounts and the continental slope are partly swept by strong currents, leading to residual enrichment of fine sand. Four sediment sources can be distinguished on the basis of distinct index minerals revealed by statistical data analysis: dust plumes from central Asia (quartz, illite), altered materials from the volcanic regions of Kamchatka and the Aleutian Arc (smectite), detritus from the Alaskan Cordillera (chlorite, hornblende), and fluvial detritus from far-eastern Siberia and the Alaska mainland (quartz, feldspar, illite). These findings confirm those of former studies but considerably expand the geographic range of this suite of proxies as far south as 39°N in the open North Pacific. The present integrated methodological approach proved useful in identifying the major modern processes of terrigenous sediment supply to the study region. This aspect deserves attention in the selection of sediment core sites for future palaeoenvironmental reconstructions related to aeolian and glacial dynamics, as well as the recognition of palaeo-ocean circulation patterns in general.