Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

2060 Chiron back to a minimum of brightness

The results of photometric observations of comet/asteroid 2060 Chiron at the Observatório do Pico dos Dias (Brazil-OPD) and the Observatoire de Haute-Provence (France-OHP) during 1994 and 1995 are presented. The analysis of the data shows a decrease of 2060 Chiron brightness from its peak values of 1988–1991. The absolute magnitude, H_v, varies from a maximum of 6.6 in February 1994 up to a minimum of 6.8 in June 1995. Therefore 2060 Chiron is back to a minimum of activity close to that of 1983–1985. The slope parameter G is found to be G = 0.71 ± 0.15. It is suggested that the H-G magnitude system, generally adopted to present 2060 Chiron brightness, is not the most appropriate due to the cometary activity of this object.     

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.     

The Auger Observatory in Argentina

The Auger Project studies the highest energies known in nature with an emphasis on energies ≥5 × 10¹⁹ eV, which are cosmic rays coming from the outer space reaching the Earth's surface with a very low flux. The questions to be elucidated are what are the origin, energy, production mechanism, and chemical composition of these cosmic rays. Auger aims at building two observatories in both the hemispheres and in 2000 the construction of the austral observatory started. Auger's two distinctive features are its exceptional size and its hybrid nature. It spans over an area of 3000 km² and is constituted by 24 fluorescence detector telescopes and 1600 surface detectors. As such, it will provide a large number of events with less systematic detection uncertainties. The construction of the Southern Observatory in Argentina is quite advanced and the buildings at the Central Station in Malargüe city are already operational. So are the telescope buildings at Cerros Los Leones and Coihueco (two prototype telescopes were operational at Los Leones, which have now been dismantled), 32 surface detectors, and the telecommunication and data acquisition systems. About 20-hybrid events/months were detected and currently two events/hours are registered with the surface detector array. The detection of hybrid events is the most important issue since it shows that the equipment operates within the design parameters.     

Opposition polarimetry and photometry of S- and E-type asteroids

The first results of the observational program devoted to simultaneous investigation of asteroid polarimetric and photometric opposition phenomena are presented. UBVRI polarimetric and V-band photometric observations of the S-type Asteroid 20 Massalia and the E-type Asteroids 214 Aschera and 620 Drakonia were carried out in 1996-1999 down to phase angles of 0.08°, 0.7°, and 1.2°, correspondingly. The S-type Asteroid 20 Massalia is characterized by the pronounced brightness opposition surge with an amplitude larger than that observed for the E-type asteroids. A sharp peak of negative polarization at small phase angles was not observed for this asteroid. The value of polarization degree at phase angle α<1° is less than 0.5% for both S and E types. The negative polarization branches of S and especially E-asteroids have an asymmetrical shape. The phase angle at which the polarization minimum occurs is close to the angle at which non-linear increase begins in the asteroid magnitude phase curves. A relation of the observed effects to the mechanism of coherent backscattering is discussed.     

The effects of Population III stars on the chemical and photometrical evolution of ellipticals

We have studied the effects of a hypothetical initial generation containing very massive stars [   M > 100 M_⊙  , pair-creation supernovae] on the chemical and photometric evolution of elliptical galaxies. To this purpose, we have computed the evolution of a typical elliptical galaxy with luminous mass of the order of  10¹¹ M_⊙  and adopted chemical evolution models already tested to reproduce the main features of ellipticals. We have tested several sets of yields for very massive zero-metallicity stars: these stars should produce quite different amounts of heavy elements than lower-mass stars. We found that the effects of Population III stars on the chemical enrichment is negligible if only one or two generations of such stars occurred, whereas they produce quite different results from the standard models if they continuously formed for a period not shorter than 0.1 Gyr. In this case, the results are at variance with the main observational constraints of ellipticals such as the average  [〈α/ Fe〉_*]  ratio in stars and the integrated colours. Therefore, we conclude that if Population III stars ever existed they must have been present for a very short period of time and their effects on the following evolution of the parent galaxy must have been negligible. This effect is minimum if a more realistic model with initial infall of gas rather than the classic monolithic model is adopted. Ultimately, we conclude that there is no need to invoke a generation of very massive stars in ellipticals to explain their chemical and photometric properties.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

What type was SN 1987A?

A comparison is made of the light and colour curves of the SN 1987A in the first 280 days with the mean properties of type II supernovae. The conclusion is that even though it has H lines, and was not a typical type II supernova, but a peculiar object from a photometric point of view. The implications for inclusion of SN 1987A in the context of the usual Minkowski-Zwicky classification are explicitly discussed.     

Chemical evolution of Elliptical Galaxies and the ICM

We present a new model for the chemical evolution of elliptical galaxies taking into account SN feedback, detailed nucleosynthesis and galactic winds. We discuss the effect of galactic winds on the chemical enrichment of the ICM and compute the energy per particle injected by the galaxies into the ICM. This revised version was published online in August 2006 with corrections to the Cover Date.