Towards a free–free template for CMB foregrounds

A full-sky template map of the Galactic free–free foreground emission component is increasingly important for high-sensitivity cosmic microwave background (CMB) experiments. We use the recently published Hα data of both the northern and southern skies as the basis for such a template.
The first step is to correct the Hα maps for dust absorption using the 100-μm dust maps of Schlegel, Finkbeiner & Davis. We show that for a range of longitudes, the Galactic latitude distribution of absorption suggests that it is 33 per cent of the full extragalactic absorption. A reliable absorption-corrected Hα map can be produced for ∼95 per cent of the sky; the area for which a template cannot be recovered is the Galactic plane area  | b | < 5°, l = 260°–0°–160°  and some isolated dense dust clouds at intermediate latitudes.
The second step is to convert the dust-corrected Hα data into a predicted radio surface brightness. The free–free emission formula is revised to give an accurate expression (1 per cent) for the radio emission covering the frequency range 100 MHz–100 GHz and the electron temperature range 3000–20 000 K. The main uncertainty when applying this expression is the variation of electron temperature across the sky. The emission formula is verified in several extended H  ii regions using data in the range 408–2326 MHz.
A full-sky free–free template map is presented at 30 GHz; the scaling to other frequencies is given. The Haslam et al. all-sky 408-MHz map of the sky can be corrected for this free–free component, which amounts to a  ≈6  per cent correction at intermediate and high latitudes, to provide a pure synchrotron all-sky template. The implications for CMB experiments are discussed.     

Radiative association in Li+H revisited: the role of quasi-bound states

The role in radiative association of narrow resonances arising from quasi-bound levels is examined. For the rate coefficient the contribution from such levels is readily calculated in terms of the Einstein A -coefficient from bound rovibrational levels generated using a suitable alternative boundary condition. By locating systematically all the quasi-bound levels, an enhancement by more than an order of magnitude of the rate coefficient for Li(2s) + H(1s) association above about 600 K is obtained. The effect on the LiH abundance in the early Universe is no more than an increase of a factor of 3 for limited ranges of values of the redshift. For the Li(2p) state the effect of narrow resonances appears to have been taken into account in previous calculations.     

Venus mesosphere and thermosphere temperature structure: II. Day-night variations

A two-dimensional nonlinear hydrodynamic model has been developed for studying the global scale winds, temperature, and compositional structure of the mesosphere and thermosphere of Venus. The model is driven by absorption of solar radiation. Ultraviolet radiation produces both heating and photodissociation. Infrared solar heating and thermal cooling are also included with an accurate NLTE treatment. The most crucial uncertainty in determining the solar drive is the efficiency by which $\text{λ < 1080}\text{A}\text{?}$ solar radiation is converted to heat. This question was analyzed in Part I, where it was concluded that essentially all hot atom and O(¹D) energy may be transferred to vibrational-rotational energy of CO₂ molecules. If this is so, the minimum possible euv heating occurs and is determined by the quenching of the resulting excess rotational energy. The hydrodynamic model is integrated with this minimum heating and neglecting any small-scale vertical eddy mixing. The results are compared with predictions of another model with the same physics except that it assumes that 30% of $\text{λ < 1080}\text{A}\text{?}$ radiation goes into heat and that the heating from longer-wavelength radiation includes the O(¹D) energy. For the low-efficiency model, exospheric temperatures are ?300°K on the dayside and drop to < 180°K at the antisolar point. For the higher-efficiency model, the day-to-night temperature variation is from ?600°K to ?250°K. Both versions of the model predict a wind of several hundred meters per second blowing across the terminator and abruptly weakening to small values on the nightside with the mass flow consequently going into a strong tongue of downward motion on the nightside of the terminator. The presence of this circulation could be tested observationally by seeing if its signature can be found in temperature measurements. Both versions of the model indicate that a self-consistent large-scale circulation would maintain oxygen concentrations with ?5% mixing ratios near the dayside F-1 ionospheric peak but ?40% at the antisolar point at the same pressure level.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.     

Detection and 2d modelling of cavities using pole–dipole array

The resistivity method is often used in cave prospecting. In this paper the pole–dipole array ability to detect cavities at different depths and with different water contents is investigated. The research was performed using analogical and numerical modelling. According to the results, empty caves at a depth less than four times its diameter can be easily detected. The ability of the pole–dipole array to detect water-filled caves reaches a minimum at filling percentages of 30–50%. Overburden effects research shows that low resistivity overburden reduces the resolution capability of the array. This study shows that equivalent results can be obtained by modelling the empty caves as infinite resistivity bodies or, alternatively, as very high resistivity ones. The analysis of field data acquired in the Maciço Calcário Estremenho (Portugal) shows the practical importance of the pole–dipole array in cavities prospecting.     

Assessing the effects of land cover and future climate conditions on the provision of hydrological services in a medium‐sized watershed of Portugal

The separated and combined effects of land‐cover scenarios and future climate on the provision of hydrological services were evaluated in Vez watershed, northern Portugal. Soil and Water Assessment Tool was calibrated against daily discharge, sediments and nitrates, with good agreements between model predictions and field observations. Four hypothetical land‐cover scenarios were applied under current climate conditions (eucalyptus/pine, oak, agriculture/vine and low vegetation). A statistical downscaling of four General Circulation Models, bias‐corrected with ground observations, was carried out for 2021–2040 and 2041–2060, using representative concentration pathway 4.5 scenario. Also, the combined effects of future climate conditions were evaluated under eucalyptus/pine and agriculture/vine scenario. Results for land cover revealed that eucalyptus/pine scenario reduced by 7% the annual water quantity and up to 17% in the summer period. Although climate change has only a modest effect on the reduction of the total annual discharge (?7%), the effect on the water levels during summer was more pronounced, between ?15% and ?38%. This study shows that climate change can affect the provision of hydrological services by reducing dry season flows and by increasing flood risks during the wet months. Regarding the combined effects, future climate may reduce the low flows, which can be aggravated with eucalyptus/pine scenario. In turn, peak flows and soil erosion can be offset. Future climate may increase soil erosion and nitrate concentration, which can be aggravated with agriculture scenario. Results moreover emphasize the need to consider both climate and land‐cover impacts in adaptation and land management options at the watershed scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Analytical study of the swing-by maneuver in an elliptical system

The objective of the present paper is to derive a set of analytical equations that describe a swing-by maneuver realized in a system of primaries that are in elliptical orbits. The goal is to calculate the variations of energy, velocity and angular momentum as a function of the usual basic parameters that describe the swing-by maneuver, as done before for the case of circular orbits. In elliptical orbits the velocity of the secondary body is no longer constant, as in the circular case, but it varies with the position of the secondary body in its orbit. As a consequence, the variations of energy, velocity and angular momentum become functions of the magnitude and the angle between the velocity vector of the secondary body and the line connecting the primaries. The “patched-conics” approach is used to obtain these equations. The configurations that result in maximum gains and losses of energy for the spacecraft are shown next, and a comparison between the results obtained using the analytical equations and numerical simulations are made to validate the method developed here.     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.