Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Mineral chemical composition and geodynamic significance of peridotites from Nain ophiolite,central Iran

The peridotites from north of the town of Nain in central Iran consist of clinopyroxene-bearing harzburgite and lherzolite with small lenses of dunite and chromitite pods. The lherzolite contains aluminous spinel with a Cr number (Cr^# = Cr/[Cr + Al]) of 0.17. The Cr number of spinels in harzburgite and chromitite is 0.38–0.42 and 0.62, respectively. This shows that the lherzolite and harzburgite resulted from <18% of partial melting of the source materials. The estimated temperature is 1100 ± 200 °C for peridotites, the estimated pressure is <15 ± 2.3 kbar for harzburgites and >16 ± 2.3 kbar for lherzolites and estimated fo₂ is 10^?1±0.5 for peridotites. Discriminant geochemical diagrams based on mineral chemistry of harzburgites indicate a supra-subduction zone (SSZ) to mid-oceanic ridge (MOR) setting for these rocks. On the basis of their Cr^#, the harzburgite and lherzolite spinels are analogous to those from abyssal peridotites and oceanic ophiolites, whereas the chromites in the chromitite (on the basis of Cr^# and boninitic nature of parental melts) resemble those from SSZ ophiolitic sequences. Therefore, the Nain ophiolite complex most likely originated in an oceanic crust related to supra-subduction zone, i.e. back arc basin. Field observations and mineral chemistry of the Nain peridotites, indicating the suture between the central Iran micro-continent (CIM) block and the Sanandaj–Sirjan zone, show that these peridotites mark the site of the Nain–Baft seaway, which opened with a slow rate of ocean-floor spreading behind the Mesozoic arc of the Sanandaj–Sirjan zone as a result of change of Neo Tethyan subduction régime during middle Cretaceous.     

Simulating urban growth in a megalopolitan area using a patch‐based cellular automata

Although traditional cellular automata (CA)‐based models can effectively simulate urban land‐use changes, they typically ignore the spatial evolution of urban patches, due to their use of cell‐based simulation strategies. This research proposes a new patch‐based CA model to incorporate a spatial constraint based on the growth patterns of urban patches into the conventional CA model for reducing the uncertainty of the distribution of simulated new urban patches. In this model, the growth pattern of urban patches is first estimated using a developed indicator that is based on the local variations in existing urban patches. The urban growth is then simulated by integrating the estimated growth pattern and land suitability using a pattern‐calibrated method. In this method, the pattern of new urban patches is gradually calibrated toward the dominant growth pattern through the steps of the CA model. The proposed model is applied to simulate urban growth in the Tehran megalopolitan area during 2000–2006–2012. The results from this model were compared with two common models: cell‐based CA and logistic‐patch CA. The proposed model yields a degree of patch‐level agreement that is 23.4 and 7.5% higher than those of these pre‐existing models, respectively. This reveals that the patch‐based CA model simulates actual development patterns much better than the two other models.     

Cantilever beam analogy for modal analysis of rocking core-moment frames

Unlike conventional seismic resisting systems, rocking core-moment frame (RCMF) combinations as low-damage assemblies are being developed to mitigate, or even eliminate structural damage and residual deformations following a severe earthquake. Despite extensive studies on the performance of specific rocking cores, dynamic characteristics and strength demands of a generic RCMF have not been addressed. By utilizing cantilever beam analogy, the current article proposes a modal analysis method to formulate RCMF demands. The proposed model and obtained analytical charts provide a manual method for rapid study and preliminary design of low- to mid-rise RCMFs with relatively uniform properties over the height. An extensive parametric study investigates the effects of rocking core base-fixity and frame-to-core stiffness on demand values. An independent computer analysis verifies the validity and accuracy of the proposed formulas. Findings show significant higher-mode effects in several RCMF combinations.     

An Introduction to MODISI and SCMOD Methods for Correction of the MODIS Snow Assessment Algorithm

Detection, monitoring and precise assessment of the snow covered regions is an important issue. Snow cover area and consequently the amount of runoff generated from snowmelt have a significant effect on water supply management. To precisely detect and monitor the snow covered area we need satellite images with suitable spatial and temporal resolutions where we usually lose one for the other. In this study, products of two sensors MODIS and ASTER both on board of TERRA platform having low and high spatial resolution respectively were used. The objective of the study was to modify the snow products of MODIS by using simultaneous images of ASTER. For this, MODIS snow index image with high temporal resolution were compared with that of ASTER, using regression and correlation analysis. To improve NDSI index two methods were developed. The first method generated from direct comparison of ASTER averaged NDSI with those of MODIS (MODISI). The second method generated by dividing MODIS NDSI index into 10 codes according to their percentage of surface cover and then compared the results with the difference between ASTER averaged and MODIS snow indices (SCMOD). Both methods were tested against some 16 MODIS pixels. It is found that the precision of the MODISI method was more than 96%. This for SCMOD was about 98%. The RMSE of both methods were as good as 0.02.     

Analysis of symbiotic Symbiodinium in scleractinian corals off Northwestern Kish Island,Persian Gulf

The genus Symbiodinium plays an essential role in the resistance and survival of reef‐building corals during temperature anomalies. Coral colonies inhabiting the Persian Gulf (PG) experience extended periods of different stresses. Kish Island is located in the harsh environment of the Northern PG with previously reported bleaching episodes. Samples of six coral species from Northwestern Kish Island were analysed by internal transcribed spacer 2 of ribosomal DNA to identify in hospite Symbiodinium populations. The results showed that lineage D of Symbiodinium was the most prevalent clade among different coral colonies, while clade C was only detected in symbiosis with a single coral species. However, the detected Symbiodinium subclades belonged to two host generalists. The predominance of the stress tolerant Symbiodinium trenchii and subclade C3 could suggest an acclimatization strategy to cope with the hostile environment of the PG.     

A global kinetic spatial data structure for a marine simulation

This paper proposes a new Free-Lagrange method based on the kinetic Voronoi diagram for fluid simulation. The objective here is to combine the advantages of an adoptive mesh structure with the advantages of kinetic mesh maintenance, and demonstrate their value for dynamic simulation. Despite the theoretical advantages of the Free-Lagrange method, its use has been handicapped with the reconstruction of topology after each time step that considerably reduces the efficiency of the method. In addition, the use of fixed time steps causes problems such as overshoots and undetected collisions. In order to demonstrate the ability of the proposed model to solve these problems, the method is applied to a dam-breaking problem and global tides. With the results obtained from these numerical experiments, the validity of the global kinetic data structure is approved. In particular, the method is found to be more efficient than existing methods. In addition, qualitative comparison of physical results with analytical solutions demonstrates the similarity of the results and confirms the physical validity of the proposed method. Further investigations with real-world data and the complete equation of motion are suggested to compare it with other numerical methods.     

Geochemistry of lower Jurassic shales of the Shemshak Formation, Kerman Province, Central Iran: Provenance, source weathering and tectonic setting

Lower Jurassic shales of the Shemshak Formation of Kerman Province, Central Iran, were analyzed for major and selected trace elements to infer their provenance, intensity of palaeoweathering of the source rocks and tectonic setting. Plots of shales on Al₂O₃ wt.% versus TiO₂ wt.% diagram and Cr (ppm) versus Ni (ppm) diagram indicate that acidic (granitic) rocks constitute the source rocks in the provenance. Average CIA, PIA and CIW values (84%, 92%, 93%, respectively) imply intense weathering of the source material. Plots of shales on bivariate discriminant function diagram reveal an active continental margin setting for the provenance. The inferred tectonic setting for the Lower Jurassic shales of the Shemshak Formation of Kerman Province is in agreement with the tectonic evolutionary history of the Central Iran during the Jurassic period.     

Groundwater Origin in Qanats,Chemo-Isotopic,and Hydrogeological Evidence

A systematic study of the chemo-isotopic characteristics and origin of the groundwater was carried out at six major qanats in the hyper-arid Gonabad area, eastern Iran. These qanats as a sustainable groundwater extraction technology have a long history, supporting human life for more than a thousand years in this region. The Gonabad qanats are characterized by outlet electrical conductivity (EC) values of 750 to 3900 µS/cm and HCO₃-Na-Mg and Cl-Na water types. The Gonabad meteoric water line (G_nMWL) was drawn at the local scale as δ²H = 6.32×δ¹⁸O + 8.35 (with R² = 0.90). It has a lower slope and intercept than the global meteoric water line due to different water vapor sources and isotope kinetic fractionation effects during precipitation in this arid region. The altitude effects on isotopic content of precipitation data were derived as δ¹⁸O = (−0.0031 × H_(m.a.s.l))−1.3). The δ²H and δ¹⁸O isotopes signatures demonstrate a meteoric origin of the groundwater of these qanats. The shift of the qanat's water samples from the local meteoric water line (LMWL) in a dry period with higher temperatures is most probably due to evaporation during the infiltration process and water movement in qanat gallery. Based on the isotopic results and mass balance calculations, the qanats are locally recharged from an area between 2000 to 2400 m.a.s.l of nearby carbonate formations and coarse alluvial sediments. The dissolution of evaporate interlayers in Neogene deposits deteriorates the groundwater quality, especially in Baidokht qanat.     

Investigation of Effective Parameters on the Embankment Dam Filter Behavior in Simultaneous Cracking in the Core and Filter

Cracks in filter can develop as a result of earthquake deformations or post-construction settlement and in some cases cracks extended through both the core and filter. Hence, a test apparatus has been developed to investigate filter performance in the case of filter and core material cracking in the embankment dams. The apparatus allows testing of incomplete cylindrical test specimens of 10 cm diameter and height of 20 cm. If the filters work well and successfully, crack filling occur, also the flow rate decrease, and the head water pressure increase to the range of early pressure. In the failed filters case, the flow rate do not decrease and remain high, also a very low head water pressure take place. In this research, variations of pressure, fines contents of filter soils, compaction time, PI of the base material and amount of eroded materials was evaluated. Results showed that prime flow rate increased as hydraulic gradient increased, but decreased in a little time and reach to a stable value. Filter with 15% of non-plastic fine content, had ability to slump to fill the crack, but its coefficient of permeability decreased significantly, hence, cannot be used as a filter in embankment dams.