排序方式: 共有37条查询结果,搜索用时 15 毫秒
1.
2.
3.
Accumulation of metals in both sediments and Phragmites australis organs was studied. Samples were collected from seven stations located in Anzali wetland, Iran. The samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The results showed that concentration of the studied metals (except As and Cd) were higher in sediments than in P. australis organs. Metal accumulation was found to be significantly (P <0.05) higher in roots than in above-ground organs of P. australis. The bioaccumulation factor (BAF) and the transfer factor (TF) also verified the highest rate of metal accumulation in roots and their reduced mobility from roots to the above-ground organs. Pearson correlation coefficient showed significant relationships between metal concentrations in sediments and those in plant organs. It should be pointed out that sediment and plant samples exhibited higher metal concentrations in eastern and central parts than in western and southern parts of the wetland. The mean concentrations of all studied elements (except for Fe, V and Al) were higher in these sediment samples than in the Earth’s crust and shale. High accumulation of metals in P. australis organs (roots and shoots) is indicative of their high bioavailability in sediments of the wetland. The correlation between metal concentrations in sediments and in P. australis indicates that plant organs are good bioindicators of metal pollution in sediments of Anzali wetland. 相似文献
4.
Abdolreza Karbassi Gholam Reza Nabi Bidhendi Mohsen Saeedi Azadeh Rastegari 《Central European Journal of Geosciences》2010,2(4):531-536
In the present study, the removal of dissolved and colloidal Cd, Co, Cu, Ni and Zn in Arvand River water during estuarine mixing with the Persian Gulf water is investigated. The flocculation process was investigated for a series of mixtures with salinities ranging from 0.48 to 30.3^. The flocculation rates were indicative of the non-conservative behavior of studied metals during estuarine mixing. Rapid flocculation in the low salinity regimes was observed. The order of the final flocculation rate of metals in the river water was as follows: Co (91.2%)> Cd (86.9%)> Zn (83%)> Cu (75.2%)> Ni (74.3%). Salinity, pH, EC and dissolved oxygen do not govern the flocculation of metals during estuarine mixing. The results of the present investigation show that estuarine processes can be considered as an effective mechanism in self purification of colloidal metals that are anthropogenically introduced into the fresh water ecosystem. 相似文献
5.
基于神经网络的南太平洋长鳍金枪鱼渔场预报 总被引:1,自引:1,他引:1
南太平洋长鳍金枪鱼是我国远洋渔业的重点捕捞对象;对南太平洋长鳍金枪鱼进行准确的渔场预报;可以提高捕捞效率;提高渔业的生产能力。本研究根据1993-2010年南太平洋长鳍金枪鱼的延绳钓生产数据以及海洋卫星遥感数据(海水表面温度;SST;海面高度;SSH)和ENSO(El Niño-Southern Oscillation)指标;采用DPS(data processing system)数据处理系统中的BP人工神经网络模型;以渔获产量(单位时间的渔获尾数)和单位捕捞努力量渔获量(CPUE;Catch per unit of effort)分别作为中心渔场的表征因子;并作为BP模型的输出因子;以月、经度、纬度、SST、SSH和ENSO指标等作为输入因子;分别构建4-3-1;5-4-1;5-3-1;6-5-1;6-4-1;6-3-1等BP模型结构;比较渔场预报模型优劣。研究结果表明;以CPUE作为输出因子的BP人工神经网络结构总体上较优;其中以6-4-1模型结构为最优;相对误差只有0.006 41。研究认为;以CPUE为输出因子的6-4-1结构的人工神经网络模型;能够准确预报南太平洋长鳍金枪鱼的渔场位置。 相似文献
6.
Nima Rahgozar Abdolreza S. Moghadam Armin Aziminejad 《Bulletin of Earthquake Engineering》2018,16(9):4081-4106
Unlike conventional seismic resisting systems, rocking core-moment frame (RCMF) combinations as low-damage assemblies are being developed to mitigate, or even eliminate structural damage and residual deformations following a severe earthquake. Despite extensive studies on the performance of specific rocking cores, dynamic characteristics and strength demands of a generic RCMF have not been addressed. By utilizing cantilever beam analogy, the current article proposes a modal analysis method to formulate RCMF demands. The proposed model and obtained analytical charts provide a manual method for rapid study and preliminary design of low- to mid-rise RCMFs with relatively uniform properties over the height. An extensive parametric study investigates the effects of rocking core base-fixity and frame-to-core stiffness on demand values. An independent computer analysis verifies the validity and accuracy of the proposed formulas. Findings show significant higher-mode effects in several RCMF combinations. 相似文献
7.
Spherical Radial Basis Functions (SRBFs) can express the local gravity field model of the Earth if they are parameterized optimally on or below the Bjerhammar sphere. This parameterization is generally defined as the shape of the base functions, their number, center locations, bandwidths, and scale coefficients. The number/location and bandwidths of the base functions are the most important parameters for accurately representing the gravity field; once they are determined, the scale coefficients can then be computed accordingly. In this study, the point-mass kernel, as the simplest shape of SRBFs, is chosen to evaluate the synthesized free-air gravity anomalies over the rough area in Auvergne and GNSS/Leveling points (synthetic height anomalies) are used to validate the results. A two-step automatic approach is proposed to determine the optimum distribution of the base functions. First, the location of the base functions and their bandwidths are found using the genetic algorithm; second, the conjugate gradient least squares method is employed to estimate the scale coefficients. The proposed methodology shows promising results. On the one hand, when using the genetic algorithm, the base functions do not need to be set to a regular grid and they can move according to the roughness of topography. In this way, the models meet the desired accuracy with a low number of base functions. On the other hand, the conjugate gradient method removes the bias between derived quasigeoid heights from the model and from the GNSS/leveling points; this means there is no need for a corrector surface. The numerical test on the area of interest revealed an RMS of 0.48 mGal for the differences between predicted and observed gravity anomalies, and a corresponding 9 cm for the differences in GNSS/leveling points. 相似文献
8.
Large impacts not only create giant basins on terrestrial planets but also heat their interior by shock waves. We investigate the impacts that have created the largest basins existing on the planets: Utopia on Mars, Caloris on Mercury, Aitken on Moon, all formed at ∼4 Ga. We determine the impact-induced temperature increases in the interior of a planet using the “foundering” shock heating model of Watters et al. (Watters, W.A., Zuber, M.T., Hager, B.H. [2009]. J. Geophys. Res. 114, E02001. doi:10.1029/2007JE002964). The post-impact thermal evolution of the planet is investigated using 2D axi-symmetric convection in a spherical shell of temperature-dependent viscosity and thermal conductivity, and pressure-dependent thermal expansion. The impact heating creates a superheated giant plume in the upper mantle which ascends rapidly and develops a strong convection in the mantle of the sub-impact hemisphere. The upwelling of the plume rapidly sweeps up the impact-heated base of the mantle away from the core-mantle boundary and replaces it with the colder surrounding material, thus reducing the effects of the impact-heated base of the mantle on the heat flux out of core. However, direct shock heating of the core stratifies the core, suppresses the pre-existing thermal convection, and cripples a pre-existing thermally-driven core dynamo. It takes about 17, 4, and 5 Myr for the stratified cores of Mars, Mercury, and Moon to exhaust impact heat and resume global convection, possibly regenerating core dynamos. 相似文献
9.
Performance of a Pier Group Foundation in Swelling Rock 总被引:1,自引:0,他引:1
Gennaro Marino Abdolreza Osouli Siavash Zamiran Iman Shafii 《Geotechnical and Geological Engineering》2017,35(1):91-109
Foundations on claystone with swell potential may experience upward movement and failure. In this case study, the cause of 58 mm upward movement of drilled-in piers is analyzed using survey data, extensometer readings, and moisture content monitoring of claystone at the site. Laboratory swell tests were conducted to characterize the swelling characteristics of the weathered rock. A swell potential analysis for the pier group foundations is presented. The interaction of the pier group with the swelling rock is considered in analyzing the initiation of the upward movement. Furthermore, a novel inverse analysis method is presented to integrate the laboratory swell test results and numerical modeling to identify the representative swell pressures acting on the pier group as well as upward movement of the pier system. The numerical analysis indicates that the studied pier system is expected to have 135 mm heave and its rate of upward movement is compared with field observations. The behavior of the pier group foundation in swelling rock under various pier spacings and superstructure pressures shows that the uplift is considerably less for piers with smaller center-to-center spacing. The results of pier group numerical modeling provide the correlation of upward deformation changes due to center-to-center spacing of the piers, pier diameters and superstructure pressures. 相似文献
10.
Stefanie Donner Dirk Rößler Frank Krüger Abdolreza Ghods Manfred R. Strecker 《Journal of Seismology》2013,17(3):925-959
The M w 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M w ?≥3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW–SE striking fault planes. The mainshock ruptured a 28° south-dipping area of 24 × 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85° towards the north. 相似文献