The effects of the reed,Phragmites australis (Trin.), on substratum grain-size distribution in a salt marsh

The effects of the reed,Phragmites australis (Trin.), growing in a brackish water lagoon, were studied in relation to the grain-size distribution of the substratum. At the salt marshes near the lagoon, the upper soils from the surface to a depth of 20 cm contained much silt-clay. These fine particles were found to be transferred from the river and fish ponds near the lagoon, and to be deposited when the tidal rhythm changed, that is, when the water current stopped. In addition, the fine particles, which were deposited on the bottom of the lagoon adjacent to the marshes, became resuspended as a result of wind-caused wave action, and then were transported and redeposited in the salt marshes at the flood tide. Since the reeds further reduced the water current caused by the waves and tide, the reeds were thought to promote redeposition of the resuspended matter. In other words, the reeds were considered to protect deposited and redeposited particles such as silt and clay from resuspension as a result of wave action by reducing the effects of waves and wind. These processes suggested that silt-clay will become abundant in the substratum of the salt marsh adjacent to the lagoon.     

Finite-element Simulation of Seismic Ground Motion with a Voxel Mesh

— Accurate simulation of seismic ground motion for three-dimensionally complex topography and structures is one of the most important goals of strong motion seismology. The finite-element method (FEM) is well suited for this kind of simulation, since traction-free conditions are already included in the formulation, and the Courant condition is less strict than for the finite-difference method (FDM). However, the FEM usually requires both large memory and computation time. These limitations can be overcome by using a mesh consisting of voxels (rectangular prisms) with isotropy built into the explicit formulation of the dynamic matrix equation. Since operators in the voxel FEM are the combinations of ordinary FDM operators and additional terms, the method keeps accuracy of the same order as FDM and the terms relax the Courant condition. The voxel FEM requires a similar amount of memory and only takes 1.2～1.4 times longer computation time. The voxel mesh can be generated considerably faster than the popular tetrahedral mesh. Both ground motions and static displacements due to a point or line source can be calculated using the voxel FEM approach. Comparisons with the reflectivity method and theoretical solutions demonstrate the successful implementation of the method, which is then applied to more complex problems.     

Pumpellyite in Low-grade Metamorphism

The regional metamorphism of the Kant? Mountains in Japan producedrocks of the following facies, with rising temperature: chloritefacies, pumpellyite-chlorite facies, glauco-phane-schist facies,and greenschist facies. This relationship is compared with theprogressive metamorphic zones in other regions where pumpellyitehas been found. Almost similar relations appear to hold in manymetamorphic terrains. Pumpellyites in glaucophanitic metamorphicterrains have, generally, low Fe'/R'R ratios. Physical andchemical conditions responsible for the formation of pumpellyiteare also discussed.     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel     

Kinetics and Equilibrium Sorption Studies of 4-Nitrophenol on pyrolyzed and activated oil shale residue

Sorption of the organic pollutant 4-nitrophenol (4-NP) by pyrolyzed and activated Jordanian oil-shale was studied. Pyrolyzed oil shale was prepared using a fluidized bed reactor at 520 °C in the presence of nitrogen. Physical activation was carried out by treating the pyrolyzed oil shale with CO₂ at 830 °C, while chemical activation was achieved by using KOH and ZnCl₂ as impregnating agents. Batch kinetics and isotherm studies were conducted to evaluate the sorption process. Effects of contact time, initial sorbate concentration, sorbent concentration, temperature, pH and inorganic salts (NaCl and KCl) on the sorption process by the different sorbents were considered. Chemically activated oil shale, pretreated with ZnCl₂, gave the highest uptake of 4-NP. The isotherm experimental data fit reasonably well to Langmuir, Freundlich and Redlich-Paterson models. Three kinetic models, namely the Morris-Weber, Lagergren, and Pseudo-Second-Order model (PSOM), were applied to represent the experimental results for both pyrolyzed and ZnCl₂-oil shale sorbents.     

Investigations and assessment of the landslide hazards of Fengdu county in the reservoir region of the Three Gorges project on the Yangtze River

The spatial database of landslides in Fengdu County of the reservoir region of the Three Gorges project (TGP) on the Yangtze River was compiled from a variety of different sources including field investigations on landslides, existing catalogues and archives on landslides, reports of meteorological events and human engineering activities that triggered slope failures. The major factors that are found to have affected the slope stabilities are outlined, and an assessment and zonation of landslide hazards of the region is made using an integrated information model, which is divided into destructive, disastrous, likely disastrous and essentially non-disastrous areas from the assessment of landslide hazards. The destructive and disastrous areas are respectively 1.9 and 13.8% of the total region, mostly being nearby townships, highways along the south bank of the Yangtze River and residential quarters along two flanks of the Yangtze River and its distributaries, that will impose direct impact to highway transportation and residential lives, and may effect to some degree the navigation of the Yangtze River, reservoir banks, and building of cities and towns.