The Bear Brook Watershed in Maine: Multi-decadal whole-watershed experimental acidification

The Bear Brook Watershed in Maine (BBWM) is a long-term research site established to study the response of forest ecosystem function to environmental disturbances of chronic acidic deposition and ecosystem nitrogen enrichment. Starting in 1989, the West Bear (treated) watershed received bimonthly applications of ammonium sulfate [(NH₄)₂SO₄] fertilizer from above the canopy, whereas East Bear (reference) received ambient deposition. The treatments were stopped in 2016, marking the beginning of the recovery phase. Research at the site has focused on soils, streams, and vegetation. Here, we describe data collected over three decades at the BBWM—input and stream output nutrient fluxes, quantitative soil pits and soil chemistry, and soil temperature and moisture.     

Numerical models of subduction and forearc deformation

Summary. Finite element models for shallow subduction produce realistic behaviour for a wide variety of mechanical strength and density distributions. Characteristic displacements are found to occur even without a discrete low-strength megathrust if there is a high-density subducted plate to localize lithospheric compression. A high-density plate is itself unnecessary in the presence of a low-strength megathrust and regional compression.
Successful finite element models produce an outer arc at the top of the trench slope, and forearc basin with geometry characteristic of natural analogues. These structural features occur by upward inelastic bending of the lithospheric wedge overlying the megathrust. This mechanically unstable behaviour may dissipate significant energy and cause the megathrust to migrate continuously by accretion, tectonic erosion, or abandonment and reinitiation farther offshore. Upward bending in the overriding plate is promoted by low megathrust dip, low megathrust shear strength, and high horizontal compression in the overriding plate.     

Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

Simulation of adaptive optics for the Vacuum Tower Telescope

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.     

The nature of Europa's dark non-ice surface material: Spatially-resolved high spectral resolution spectroscopy from the Keck telescope

We present new 1.45-1.75 μm spectra of Europa's dark non-ice material with a spectral resolution (λ/δλ) of 1200, obtained by using adaptive optics on the Keck telescope to spatially separate the spectrum of the non-ice material from that of the surrounding ice-rich regions. Despite the great increase in spectral resolution over the previous best spectra of the non-ice material, taken with Galileo's near-infrared mapping spectrometer (NIMS) with λ/δλ=66, no new fine-scale spectral structure is revealed. The smoothness of the spectra is inconsistent with available laboratory spectra of crystalline hydrated salts at Europa temperatures, but is more consistent with various combinations of non-crystalline hydrated salts and/or hydrated sulfuric acid, as have been matched to the lower-resolution NIMS spectra.     

Circular Polarisation Observations of SS433

We present four epochs of observations of the Galactic X-ray binarySS433 using the Australian Telescope Compact Array (ATCA). These observations, taken on 4 February, 29 February, 23 March and 27 June 2000, at four frequencies ranging from 1–9 Ghz, are used to monitor the circular polarised emission from the source. We obtain circular polarisation spectra for the first three epochs with spectralindices α, (m _c ∝ν ^α), equal to 0.07±0.10, –1.07±0.09 and –0.18±0.05 and also observe a sign change in Stokes V. This change of handedness may indicate along-term restructuring of the magnetic field.     

Finding KBO Flyby Targets for New Horizons

Development of the New Horizons mission to Pluto and the Kuiper Belt is now fully funded by NASA (Stern and Spencer, this volume). If all goes well, New Horizons will be launched in January 2006, followed by a Jupiter gravity assist in 2007, with Pluto arrival expected in either 2015 or 2016, depending on the launch vehicle chosen. A backup launch date of early 2007, without a Jupiter flyby, would give a Pluto arrival in 2019 or 2020. In either case, a flyby of at least one Kuiper Belt object (KBO) is planned following the Pluto encounter, sometime before the spacecraft reaches a heliocentric distance of 50 AU, in 2021 or 2023 for the 2006 launch, and 2027 or 2029 for the 2007 launch. However, none of the almost 1000 currently-known KBOs will pass close enough to the spacecraft trajectory to be targeted by New Horizons, so the KBO flyby depends on finding a suitable target among the estimated 500,000 KBOs larger than 40 km in diameter. This paper discusses the issues involved in finding one or more KBO targets for New Horizons. The New Horizons team plans its own searches for mission KBOs but will welcome other U.S, or international team who wish to become involved in exchange for mission participation at the KBO.     

A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Mesoscale linear streaks on Mars: environments of dust entrainment

Variable surface albedo features on Mars are likely caused by the entrainment and deposition of dust by the wind. Most discrete markings are associated with topographic forms or with regional slopes that serve to alter the effective wind shear stress on the surface. Some of the largest variable features, here termed mesoscale linear streaks, are up to 400 km in length and repeatedly occur in one of the smoothest regions of Mars: Amazonis Planitia. Their orientations and apparent season of variability as observed by Viking and Mars Orbiter cameras indicate linear streak formation by enhanced surface wind stresses during regional or local dust storms and during the initial stages of global dust storms. They provide an example of the ability of large-scale winds, without significant local enhancement, to initiate dust motion on Mars. The sizes and spacing of the linear streaks may be controlled by boundary layer rolls. The repetitive formation of these streaks, over a span of more than 11 Mars years, gives one measure of the stability of Mars’ eolian processes.