Raman microspectrometry, FT-IR and inclusion characteristics of gem garnets from Tanzania and Madagascar

Chemical composition, Raman microspectrometry, and Fourier transform infrared (FT-1R) and SEM-CL (Cathodluminescence) analyses are carried out for Tanzania and Madagascar garnets for locality identification. Inclusion study was sustained after electron probe microanalysis (EPMA). Needle-like illmenites, apatites and zircons were the most common solid inclusions in Tanzania garnets. Madagascar garnets revealed rutile needles and apatites were also observed, but differences in size, shape and distribution patterns were noticed compared to Tanzania garnets. Tanzania garnets exhibited all types of observable fluid inclusions such as ““ fingerprint““ pattern, called Type Ⅰ-A, liquid-only (L) single phase fluid inclusion, called Type Ⅰ-B and Type Ⅱ-A ( L S), Type Ⅱ-B ( L V) and Type Ⅲ-A (L Sylvite even if all examined garnets from three localities retained ““fingerprint““ features, so called, partially healed fractures, in common. Chemical composition, Raman microspectrometry and Fourier transform infrared (FT-IR) analysis taken turned out to be useful methods for the purpose of this study. Using consequences of SEM-CL and inclusion study, accordingly, the locality identification of gem-quality garnets is capable of being available in further application for other kinds of gemstones.     

Confirmation of a meteoritic component in impact‐melt rocks of the Chesapeake Bay impact structure,Virginia, USA—Evidence from osmium isotopic and PGE systematics

Abstract— The osmium isotope ratios and platinum‐group element (PGE) concentrations of impact‐melt rocks in the Chesapeake Bay impact structure were determined. The impact‐melt rocks come from the cored part of a lower‐crater section of suevitic crystalline‐clast breccia in an 823 m scientific test hole over the central uplift at Cape Charles, Virginia. The ¹⁸⁷Os/¹⁸⁸Os ratios of impact‐melt rocks range from 0.151 to 0.518. The rhenium and platinum‐group element (PGE) concentrations of these rocks are 30–270x higher than concentrations in basement gneiss, and together with the osmium isotopes indicate a substantial meteoritic component in some impact‐melt rocks. Because the PGE abundances in the impact‐melt rocks are dominated by the target materials, interelemental ratios of the impact‐melt rocks are highly variable and nonchondritic. The chemical nature of the projectile for the Chesapeake Bay impact structure cannot be constrained at this time. Model mixing calculations between chondritic and crustal components suggest that most impact‐melt rocks include a bulk meteoritic component of 0.01–0.1% by mass. Several impact‐melt rocks with lowest initial ¹⁸⁷Os/¹⁸⁸Os ratios and the highest osmium concentrations could have been produced by additions of 0.1%–0.2% of a meteoritic component. In these samples, as much as 70% of the total Os may be of meteoritic origin. At the calculated proportions of a meteoritic component (0.01–0.1% by mass), no mixtures of the investigated target rocks and sediments can reproduce the observed PGE abundances of the impact‐melt rocks, suggesting that other PGE enrichment processes operated along with the meteoritic contamination. Possible explanations are 1) participation of unsampled target materials with high PGE abundances in the impact‐melt rocks, and 2) variable fractionations of PGE during syn‐ to post‐impact events.     

East Asian monsoon variation and climate changes in Jeju Island, Korea, during the latest Pleistocene to early Holocene

A 4.96-m-long sediment core from the Hanon paleo-maar in Jeju Island, Korea was studied to investigate the paleoclimatic change and East Asian monsoon variations during the latest Pleistocene to early Holocene (23,000-9000 cal yr BP). High-resolution TOC content, magnetic susceptibility, and major element composition data indicate that Jeju Island experienced the coldest climate around 18,000 cal yr BP, which corresponds to the last glacial maximum (LGM). Further, these multi-proxy data show an abrupt shift in climatic regime from cold and arid to warm and humid conditions at around 14,000 cal yr BP, which represents the commencement of the last major deglaciation. After the last major deglaciation, the TOC content decreased from 13,300 to 12,000 cal yr BP and from 11,500 to 9800 cal yr BP, thereby reflecting the weakening of the summer monsoon. The LGM in Jeju Island occurred later in comparison with the Chinese Loess Plateau. Such a disparity in climatic change events between central China and Jeju Island appears to be caused by the asynchrony between the coldest temperature event and the minimum precipitation event in central China and by the buffering effect of the Pacific Ocean.     

The sediment-water interface increment due to the complex burrows of macrofauna in a tidal flat

The architecture of macrofaunal burrows and the total area of the sediment-water interface created by biogenic structure were investigated in the Donggeomdo tidal flat on the west coast of Korea. Resin casting methods were applied to recover burrows of four dominant species, Macrophthalmus japonicus, Cleistostoma dilatatum, Perinereis aibuhitensis, and Periserrula leucophryna, and whole burrows within the casting area at three sites in different tidal levels.P. leucophryna excavated the largest burrow in terms of a surface area among them. In the case of whole burrow casting, the space occupied by the biogenic structure was extended into deeper and expanded more greatly at the higher tidal level. In the uppermost flat, the burrow wall surface area within sediment was more extensive than the sediment surface area. Increased oxygen supply through the extended interface could enhance the degradation rates of organic carbon and also change the pathways of degradation. Quantifying the relationship between the extended interface and mineralization rate and pathway requires more extensive study.     

Some stability properties of large-scale baroclinic flows with nonlinear zonal current profile

The stability properties of a baroclinic zonal current with nonlinear velocity profile are investigated. The integral method is applied to the governing eigenvalue equation having the vertical velocity as the dependent variable. Expressed in terms of the Rossby number and the Richardson number, stability criteria, unstable regions in the complexc plane, and the upper bound of the unstable wave growth rate are found. Some differences in the results are noted between the present model and the quasi-geostrophic streamfunction model, particularly in connection with the effect of the velocity profile curvature termU _zz . It is conjectured in the present model that, depending on extreme behaviors ofU _zz , the propagation speed of unstable waves can be greater thanU _max or smaller thanU _min .     

Geophysical and geochemical observations on actively seeping hydrocarbon gases on the south-eastern Yellow Sea continental shelf

In the southeastern Yellow Sea, active seepage of hydrocarbon gases has been observed by high-resolution (3.5 kHz) seismic profiling both in 1987 and 2001, occurring through a large number of plumes from the topmost pre-Holocene sedimentary layer. It is strong enough to compensate for current speed, extending vertically up to the sea surface. The gas seepage often appears to be explosive to form craters and diapirs, although pockmarks are rare due to the redistribution of mobile palimpsest sands. In core-top seawater and sediments, the gases are characterized by high amounts of C₂, homogenous ¹³C₁ values and a large difference (19.7 on average) between ¹³C₁ (–55.2 to –53.6 PDB) and ¹³C₂ (–36.8 to –32.5 PDB) values. The gases are considered to be generated with a smaller amount of C₁ at the early thermal cracking stage of labile source materials, after which the C₂ gas is enriched in ¹³C by diffusion or biological alternation at the generation or accumulation site. The homogenous ¹³C₁ values may be one of the geochemical characteristics of gases acquired at depth which are less altered in the case of rapid diffusive gas migration to the seafloor.     

Bacterioplankton growth and production at the Louisiana hydrocarbon seeps

The growth rate and potential production of bacterioplankton in cold hydrocarbon seeps located along the Louisiana coast were determined using a pulse-labeling technique. Surprisingly, community doubling times are on the order of 1.1 h, which compares to laboratory-grown cultures. We also found that there are differences in growth rates on relatively small geographic scales, suggesting the influence of site-specific geological features (e.g., gas hydrate mounds). Proceeding downslope to deeper waters, methane-oxidizing bacteria appeared to play a more significant role in community productivity. These preliminary experiments indicated, quite unexpectedly, that water column microbes are growing at a more rapid rate than in any other marine system so far studied and that methane may serve as a primary nutrient (carbon) source in these seep-associated microbial assemblages.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

硫酸皮肤素寡糖的分离与制备

利用软骨素酶 ABC (Chondroitinase ABC,EC4 .2 .2 .4 )对硫酸皮肤素 (Dermatan Sul-fate,DS)进行控制降解。对得到的混合寡糖首先采用低压凝胶渗透色谱 (L PGPC)进行分级 ,然后对每一组分再利用强阴离子交换高压液相色谱 (SAX- HPL C)进行分离 ,最终制备出聚合度为 2 ,4 ,6 ,8,10 ,12的寡糖纯品。寡糖纯度采用 SAX- HPL C,毛细管电泳 (CE)以及聚丙烯酰胺凝胶电泳(PAGE)进行检验 ,结构采用电喷雾离子化质谱 (ESI- MS)以及核磁共振波谱 (NMR)技术确定