Comparing seven candidate mission configurations for temporal gravity field retrieval through full-scale numerical simulation

The goal of this contribution is to focus on improving the quality of gravity field models in the form of spherical harmonic representation via alternative configuration scenarios applied in future gravimetric satellite missions. We performed full-scale simulations of various mission scenarios within the frame work of the German joint research project “Concepts for future gravity field satellite missions” as part of the Geotechnologies Program, funded by the German Federal Ministry of Education and Research and the German Research Foundation. In contrast to most previous simulation studies including our own previous work, we extended the simulated time span from one to three consecutive months to improve the robustness of the assessed performance. New is that we performed simulations for seven dedicated satellite configurations in addition to the GRACE scenario, serving as a reference baseline. These scenarios include a “GRACE Follow-on” mission (with some modifications to the currently implemented GRACE-FO mission), and an in-line “Bender” mission, in addition to five mission scenarios that include additional cross-track and radial information. Our results clearly confirm the benefit of radial and cross-track measurement information compared to the GRACE along-track observable: the gravity fields recovered from the related alternative mission scenarios are superior in terms of error level and error isotropy. In fact, one of our main findings is that although the noise levels achievable with the particular configurations do vary between the simulated months, their order of performance remains the same. Our findings show also that the advanced pendulums provide the best performance of the investigated single formations, however an accuracy reduced by about 2–4 times in the important long-wavelength part of the spectrum (for spherical harmonic degrees ${<}50$ ), compared to the Bender mission, can be observed. Concerning state-of-the-art mission constraints, in particular the severe restriction of heterodyne lasers on maximum range-rates, only the moderate Pendulum and the Bender-mission are beneficial options, of course in addition to GRACE and GRACE-FO. Furthermore, a Bender-type constellation would result in the most accurate gravity field solution by a factor of about 12 at long wavelengths (up to degree/order 40) and by a factor of about 200 at short wavelengths (up to degree/order 120) compared to the present GRACE solution. Finally, we suggest the Pendulum and the Bender missions as candidate mission configurations depending on the available budget and technological progress.     

Gondwana-Derived Terranes Structural Mapping Using PALSAR Remote Sensing Data

Gondwana-derived terranes are now separated by major faults or suture zone, which are rarely simple and easily recognizable lineaments. Different association of ore mineral systems such as deposits of sediment-hosted/orogenic gold and granite-related minerals is discovered in collision and subduction zones of the Gondwana-derived terranes. They are associated with large-scale, terrane-bounding fault systems and broad areas of deformation. Mineralization mostly associated with structurally-controlled complex lodes, veins, sheeted veins and veinlets in diverse orientations. Recognizing the structural significance of lineaments and curvilinear is very difficult in tropical, arid and Antarctic regions due to environmental obstacles. Remote sensing data could be used to detect geological structures associated with suture zones between Gondwana-derived terranes especially for large inaccessible regions where fieldwork is limited or nonexistent. In this investigation, the Phased Array type L-band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in the Bentong-Raub Suture Zone of Peninsular Malaysia. It is one of the major structural zones in Sundaland, Southeast Asia, which forms the boundary between the Gondwana-derived the Sibumasu terrane and Sukhothai-Indochina arc. Structural features associated with sediment-hosted/orogenic gold deposits in the Central Gold Belt and tin mineralization in S-type granites in the Main Range were investigated using PALSAR data and comprehensive fieldwork. Results indicate that main faults strike along 340° to 350° that are intersected by many shear or lateral fault zones are high potential zone for gold mineralization in the Central Gold Belt. Hydrothermally alteration mineral zones and cataclastic rocks are also the other indicators of gold mineralized veins in the gold belt. High potential zones for tin mineralization are N–S strike-slip faults, fault zones and shear zones trending E–W, NE–SW and WNW–ESE in dissected crystalline granitic rocks that are associated with hydrothermal alteration zones in the Western Tin Belt. Lineament analysis using PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detection of the boundary between the Gondwana-derived terranes and detailed structural analysis of fault systems and deformation with high potential for a variety of mineral resources, especially in tropical, arid and Antarctic regions.     

Integration of ASTER and landsat TM remote sensing data for chromite prospecting and lithological mapping in Neyriz ophiolite zone,south Iran

Chromite deposits in Iran are located in the ophiolite complexes, which have mostly podiform types and irregular in their settings. Exploration for podiform chromite deposits associated with ophiolite complexes has been a challenge for the prospectors due to tectonic disturbance and their distribution patterns. Most of Iranian ophiolitic zones are located in mountainous and inaccessible regions. Remote sensing approach could be applicable tool for choromite prospecting in Iranian ophiolitic zones with intensely rugged topography, where systematic sampling and conventional geological mapping are limited. In this study, Landsat Thematic Mapper (TM) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) satellite data were used for chromite prospecting and lithological mapping in the Neyriz ophiolitic zone in the south of Iran. Image transformation techniques, namely decorrelation stretch, band ratio and principal component analysis (PCA) were applied to Landsat TM and ASTER data sets for lithological mapping at regional scale. The RGB decorrelated image of Landsat TM spectral bands 7, 5, and 4, and the principal components PC1, PC2 and PC3 image of ASTER SWIR spectral bands efficiently showed the occurrence of major lithological units in the study area at regional scale. The band ratios of 5/3, 5/1, 7/5 applied on ASTER VNIR‐SWIR bands were very useful for discriminating most of rock units in the study area and delineation of the transition zone and mantle harzburgite in the Neyriz ophiolitic complex. Spectral Angle Mapper (SAM) technique was implemented to ASTER VNIR‐SWIR spectral bands for detecting minerals of rock units and especially delineation of the transition zone and mantle harzburgite as potential zones with high chromite mineralization in the Neyriz ophiolitic complex. The integration of information extracted from the image processing algorithms used in this study mapped most of lithological units of the Neyriz ophiolitic complex and identified potential areas of high chromite mineralization (transition zone and mantle harzburgite) for chromite prospecting targets in the future. Furthermore, image processing results were verified by comprehensive fieldwork and laboratory analysis in the study area. Accordingly, result of this investigation indicate that the integration of information extracted from the image processing algorithms using Landsat TM and ASTER data sets could be broadly applicable tool for chromite prospecting and lithological mapping in mountainous and inaccessible regions such Iranian ophiolitic zones.     

Comparison of ETM+ and MODIS Data for Tropical Forest Degradation Monitoring in the Peninsular Malaysia

This study was undertaken the use of course and moderate spatial resolution remote sensing data to assess the forest degradation in the Peninsular Malaysia. Moderate Resolution Imaging Spectroradiometer (MODIS) imagery was used as coarse spatial resolution data, while Landsat Enhanced Thematic Mapper⁺ (ETM⁺) imagery was used as moderate spatial resolution to compare the accuracy. Geometric and radiometric correction and re-sampling were performed in pre-processing to enhance the analysis and results. Canopy fractional cover was used as an approach to assess the forest degradation in this study. Then, an optimum vegetation index was selected to apply on canopy fractional cover to enhance the detection of forest canopy damage. At the same time, accuracy assessment for the approach was referred to the location of Neobalanocarpus Heimii and correlate with global evapotranspiration rate. The forest degradation analysis was also applied and compared for all of the states in the Peninsular Malaysia. In conclusion, Landsat ETM⁺ imagery obtained higher accuracy compare to MODIS using canopy fractional cover approach for forest degradation assessment, and can be more broadly applicable to use for forest degradation investigation.     

Structural Mapping of the Bentong‐Raub Suture Zone Using PALSAR Remote Sensing Data,Peninsular Malaysia: Implications for Sediment‐hosted/Orogenic Gold Mineral Systems Exploration

The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.     

Relative performance of CMIP5 and CMIP6 models in simulating rainfall in Peninsular Malaysia

Theoretical and Applied Climatology - This study evaluated the skills of global climate models (GCMs) of the fifth and sixth Coupled Model Intercomparison Project (CMIP5 and CMIP6) in simulating...     

Application of Landsat-8 and ASTER satellite remote sensing data for porphyry copper exploration: a case study from Shahr-e-Babak,Kerman, south of Iran

Abstract

The Shahr-e-Babak region located in the Kerman metallogenic belt is one of the high potential segments of Urumieh–Dokhtar magmatic arc for porphyry copper and epithermal gold mineralization in the south of Iran. This high potential zone encompasses several porphyry copper deposits under exploitation, development and exploration stages. The aim of this study is to evaluate Landsat-8 data and comparison with the Advanced Spaceborne Thermal Emission and Reflection Radiometer data-sets for mapping hydrothermal alteration zones related to Cenozoic magmatic intrusions in Shahr-e-Babak region. Previous studies have proven the robust application of ASTER in lithological mapping and mineral exploration; nonetheless, the Landsat-8 data have high capability to map and detect hydrothermal alteration zones associated with porphyry copper and epithermal gold mineralization. In this investigation, several band combinations and multiplications, developed selective principal component analysis and image transformations were developed for discriminating hydrothermal alteration zones associated with porphyry copper mineralization using Landsat-8 data.     

Mapping alteration mineral zones and lithological units in Antarctic regions using spectral bands of ASTER remote sensing data

Abstract

Geological mapping is one of the primary tasks of remote sensing. Remote sensing applications are especially useful when extreme environmental conditions inhibit direct survey such as in Antarctica. In this investigation, a satellite-based remote sensing approach was used for mapping alteration mineral zones and lithological units using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data in the Oscar II coast area, north-eastern Graham Land, Antarctic Peninsula. Specialized band ratios and band combinations were developed using visible and near infrared, shortwave infrared (SWIR) and thermal infrared spectral bands of ASTER for detecting alteration mineral assemblages and lithological units in Antarctic environments. Constrained Energy Minimization, Orthogonal Subspace Projection and Adaptive Coherence Estimator algorithms were tested to ASTER SWIR bands for detecting sub-pixels’ abundance of spectral features related to muscovite, kaolinite, illite, montmorillonite, epidote, chlorite and biotite. Results indicate valuable applicability of ASTER data for Antarctic geological mapping.     

Probabilistic Convective Initiation Nowcasting with Reduced Satellite - NWP Predictors over Iran

Geostationary satellites are able to nowcast Convective Initiation (CI) for the next 0–6 h. Compared to using satellite predictors only, the incorporation of satellite and Numerical Weather Prediction (NWP) predictors can provide the possibility to reduce false alarm rates in 0–1:30 Convective Initiation Nowcasting (COIN). However, the correlation among these predictors not only can cause error in COIN, but also increases the runtime. In this study for the first time, all effective predictors in Satellite Convection Analysis and Tracking version 2 (SATCASTv2) and NWP were applied over Iran from 22nd March 2015 to 9th January 2016. In applying SATCASTv2 over Iran, it was necessary to make some modifications to the algorithm, such as removing case specific thresholds of satellite predictors and rearranging COIN predictors. Then, SATCASTv2 was tested and evaluated with both the full and reduced set of predictors. The results suggested that using fixed thresholds for temporal difference predictors could miss COIN in some cases. To investigate the possibility of improving computational efficiency, a dimension reduction was conducted by Factor Analysis (FA) and the number of predictors was reduced from 22 to 11. The NWP-satellite, reduced NWP-satellite, and satellite predictors were used as input in Random Forest (RF), as a parametric machine learning method, for COIN evaluation. The Combination of NWP model and satellite predictors had lower false alarm rates in contrast with satellite predictors. This is in agreement with previous studies. The results from statistical metrics showed that the reduced NWP-satellite predictors had comparable performance to the NWP-satellite predictors over study area, but decreased the run time by almost 50%. The results indicated that Convective Inhibition (CIN) was the most significant predictor when the reduced set of predictors was used.     

Some Physical and Computational Issues in Land Surface Data Assimilation of Satellite Skin Temperatures

Skin temperatures that reflect the radiating temperature of a surface observed by infrared radiometers are one of the most widely available products from polar orbiting and geostationary satellites and the most commonly used satellite data in land surface assimilation. Past work has indicated that a simple land surface scheme with a few key parameters constrained by observations such as skin temperatures may be preferable to complex land use schemes with many unknown parameters. However, a true radiating skin temperature is sometimes not a prognostic variable in weather forecast models. Additionally, recent research has shown that skin temperatures cannot be directly used in surface similarity forms for inferring fluxes. This paper examines issues encountered in using satellite derived skin temperatures to improve surface flux specifications in weather forecast and air quality models. Attention is given to iterations necessary when attempting to nudge the surface energy budget equation to a desired state. Finally, the issue of mathematical operator splitting is examined in which the surface energy budget calculations are split with the atmospheric vertical diffusion calculations. However, the high level of connectivity between the surface and first atmospheric level means that the operator splitting leads to high frequency oscillations. These oscillations may hinder the assimilation of skin temperature derived moisture fluxes.