New results concerning the pedo- and chronostratigraphy of the loess–palaeosol sequence Attenfeld (Bavaria,Germany) derived from a multi-methodological approach

Loess–palaeosol sequences (LPS) represent important records of palaeoenvironmental dynamics throughout the Quaternary. During the Pleistocene's dry and cold phases, the Danube's riverbed was one of the major sources for loess sediments that built up LPS in southern Germany and southeastern Europe. Surprisingly, studies addressing Bavarian LPS along the Danube River often lack actuality. The Attenfeld site was one of them and is often cited as a typical LPS. Nevertheless, the site's previous interpretations are based on a few empirical data and field observations. Considering the site's closeness to the sediment's source area, the Alps, and the region's importance in Middle and Upper Palaeolithic migrational movements, those former renditions needed an evaluation. Therefore, we applied a multi-proxy approach (including analyses of grain-size distribution, element composition, and sediment colour attributes) combined with optically stimulated luminescence. Based on our findings, we conclude that the Attenfeld site's former interpretations might be too generalised. We identified units that were not mentioned by previous studies (e.g. Early Glacial dark greyish horizon). Field observations, sediment characteristics, and age estimates indicate sediment deposition of the dated units partly before MIS 4, which contrasts with previous interpretations. The results further demonstrate how sensitive LPS are to environmental settings and dynamics.     

Guiding ecological principles for marine spatial planning

The declining health of marine ecosystems around the world is evidence that current piecemeal governance is inadequate to successfully support healthy coastal and ocean ecosystems and sustain human uses of the ocean. One proposed solution to this problem is ecosystem-based marine spatial planning (MSP), which is a process that informs the spatial distribution of activities in the ocean so that existing and emerging uses can be maintained, use conflicts reduced, and ecosystem health and services protected and sustained for future generations. Because a key goal of ecosystem-based MSP is to maintain the delivery of ecosystem services that humans want and need, it must be based on ecological principles that articulate the scientifically recognized attributes of healthy, functioning ecosystems. These principles should be incorporated into a decision-making framework with clearly defined targets for these ecological attributes. This paper identifies ecological principles for MSP based on a synthesis of previously suggested and/or operationalized principles, along with recommendations generated by a group of twenty ecologists and marine scientists with diverse backgrounds and perspectives on MSP. The proposed four main ecological principles to guide MSP—maintaining or restoring: native species diversity, habitat diversity and heterogeneity, key species, and connectivity—and two additional guidelines, the need to account for context and uncertainty, must be explicitly taken into account in the planning process. When applied in concert with social, economic, and governance principles, these ecological principles can inform the designation and siting of ocean uses and the management of activities in the ocean to maintain or restore healthy ecosystems, allow delivery of marine ecosystem services, and ensure sustainable economic and social benefits.     

Shallow site archaeology: Artifact dispersal,stratigraphy, and radiocarbon dating at the Barger Gulch locality B Folsom Site,Middle Park,Colorado

Shallowly buried archaeological sites are particularly susceptible to surface and subsurface disturbance processes. Yet, because cultural deposition often operates on short time scales relative to geologic deposition, vertical artifact distributions can be used to clarify questions of site formation. In particular, patterns in artifact distributions that cannot be explained by occupation histories must be explained by natural processes that have affected sites. Buried only 10–50 cm beneath the ground surface for 10,450 ¹⁴C yr, the Folsom component at Barger Gulch Locality B (Middle Park, Colorado) exhibits many signs of post‐depositional disturbance. Through examination of variation in the vertical distribution of the artifact assemblage, we are able to establish that only a Folsom component is present. Using vertical artifact distributions, stratigraphy, and radiocarbon dating, we are able to reconstruct the series of events that have impacted the site. The Folsom occupation (˜10,450 ¹⁴C yr B.P.) was likely initially buried in a late‐Pleistocene eolian silt loam. Erosion brought the artifacts to rest on a deflation surface at some time prior to 9400 ¹⁴C yr B.P. A mollic epipedon formed in sediments that accumulated between 9400 and 7000 ¹⁴C yr B.P. Some time after 5200 ¹⁴C yr B.P., this soil was partially truncated, and artifacts that had previously dispersed upward created a secondary lag at its upper contact. This surface was buried again and artifact dispersal continued. © 2005 Wiley Periodicals, Inc.     

TEM evidence for intracellular accumulation of lead by bacteria in subsurface environments

We monitored near-surface atmospheric fallout (15-cm above ground) and soil solution (at 15, 35 and 55 cm below ground) derived nanoparticles over an 8-month period by collecting the particles directly onto TEM grids in anthropogenically-influenced (vineyard) and pristine (native forest) sites in France. Particle clusters trapped on the grid were selected randomly and individual particles were binned into eight different groups (euhedral clays, weathered clays, salts, oxi-hydroxides, bacteria, non-living organic matter, aggregates and undetermined). Bacteria represent 9–23% of the collected nanoparticle area (ave. 9.4% and 18% for two atmospheric collection sites and ave. 23% for soil infiltration samples). Bacteria were most often associated with non-living organic matter and comprised a variety of morpho-types. Interestingly, 45% of all the bacteria analyzed by transmission electron microscopy and electron dispersive spectroscopy (TEM-EDX) showed the presence of intracellular grains significantly enriched in lead and phosphorus. Intracellular sequestration of Pb into polyphosphate bodies has been observed in the laboratory, but this is the first observation of this phenomenon in a natural environment. Furthermore, this suggests that microbial-bound Pb may be an important transport mechanism in subsurface environments.     

The P-T-fO 2 stability of deerite,Fe 12 2+ Fe 6 3+ [Si12O40](OH)10

New equilibrium experiments have been performed in the 20–27 kbar range to determine the upper thermal stability limit of endmember deerite, Fe ₁₂ ²⁺ Fe ₆ ³⁺ [Si₁₂O₄₀](OH)₁₀. In this pressure range, the maximum thermal stability limit is represented by the oxygen-conserving reaction: deerite(De)=9 ferrosilite(Fs)+3 magnetite(Mag)+3 quartz(Qtz)+5 H₂O(W) (1). Under the oxygen fugacities of the Ni-NiO buffer the breakdown-reduction reaction: De=12 Fs+2 Mag+5 W+1/2 O₂ (10) takes place at lower temperatures (e.g. T=63° at 27 kbar). The experimental brackets can be fitted using thermodynamic data for ferrosilite, magnetite and quartz from Berman (1988) and the following 1 bar, 298 K data for deerite (per gfw): V^o=55.74 J.bar^-1, S^o=1670 J.K^-1, H _f ^o =-18334 kJ, =2.5x10^-5K^-1, =-0.18x10^-5 bar^-1. Using these data in conjunction with literature data on coesite, grunerite, minnesotaite, and greenalite, the P-T stability field of endmember deerite has been calculated for P _s=P _{H 2}O. This field is limited by 6 univariant oxygenconserving dehydration curves, from which three have positive dP/dT slopes, the other three negative slopes. The lower pressure end of the stability field of endmember deerite is thus located at an invariant point at 250±70°C and 10+-1.5 kbar. Deerite rich in the endmember can thus appear only in environments with geothermal gradients lower than 10°C/km and at pressures higher than about 10 kbar, which is in agreement with 4 out of 5 independent P-T estimates for known occurrences. The presence of such deerite places good constraints on minimum pressure and maximum temperature conditions. From log f _{O 2}-T diagrams constructed with the same data base at different pressures, it appears that endmember deerite is, at temperatures near those of its upper stability limit, stable only over a narrow range of oxygen fugacities within the magnetite field. With decreasing temperatures, deerite becomes stable towards slightly higher oxygen fugacities but reaches the hematite field only at temperatures more than 200°C lower than the upper stability limit. This practically precludes the coexistence deerite-hematite with near-endmember deerite in natural environments.     

Mafic magmas from Mount Baker in the northern Cascade arc,Washington: probes into mantle and crustal processes

Five mafic lava flows located on the southern flank of Mount Baker are among the most primitive in the volcanic field. A comprehensive dataset of whole rock and mineral chemistry reveals the diversity of these mafic lavas that come from distinct sources and have been variably affected by ascent through the crust. Disequilibrium textures present in all of the lavas indicate that crustal processes have affected the magmas. Despite this evidence, mantle source characteristics have been retained and three primitive endmember lava types are represented. These include (1) modified low-K tholeiitic basalt (LKOT-like), (2) typical calc-alkaline (CA) lavas, and (3) high-Mg basaltic andesite and andesite (HMBA and HMA). The Type 1 endmember, the basalt of Park Butte (49.3–50.3 wt% SiO₂, Mg# 64–65), has major element chemistry similar to LKOT found elsewhere in the Cascades. Park Butte also has the lowest overall abundances of trace elements (with the exception of the HREE), indicating it is either derived from the most depleted mantle source or has undergone the largest degree of partial melting. The Type 2 endmember is represented by the basalts of Lake Shannon (50.7–52.6 wt% SiO₂, Mg# 58–62) and Sulphur Creek (51.2–54.6 wt% SiO₂, Mg# 56–57). These two lavas are comparable to calc-alkaline rocks found in arcs worldwide and have similar trace element patterns; however, they differ from each other in abundances of REE, indicating variation in degree of partial melting or fractionation. The Type 3 endmember is represented by the HMBA of Tarn Plateau (51.8–54.0 wt% SiO₂, Mg# 68–70) and the HMA of Glacier Creek (58.3–58.7 wt% SiO₂, Mg# 63–64). The strongly depleted HREE nature of these Type 3 units and their decreasing Mg# with increasing SiO₂ suggests fractionation from a high-Mg basaltic parent derived from a source with residual garnet. Another basaltic andesite unit, Cathedral Crag (52.2–52.6 wt% SiO₂, Mg# 55–58), is an Mg-poor differentiate of the Type 3 endmember. The calc-alkaline lavas are least enriched in a subduction component (lowest H₂O, Sr/P_N, and Ba/Nb), the LKOT-like lavas are intermediate (moderate Sr/P_N and Ba/Nb), and the HMBA are most enriched (highest H₂O, Sr/P_N and Ba/Nb). The generation of the LKOT-like and calc-alkaline lavas can be successfully modeled by partial melting of a spinel lherzolite with variability in composition of slab flux and/or mantle source depletion. The HMBA lavas can be successfully modeled by partial melting of a garnet lherzolite with slab flux compositionally similar to the other lava types, or less likely by partial melting of a spinel lherzolite with a distinctly different, HREE-depleted slab flux.     

Circumstellar dynamics and transfer

This paper is both a review and a presentation of new models. Observation and modelization of circumstellar envelopes of early type or late type stars are now quickly evolving because of new techniques and facilities for observations, and increased power of computers. More and more complex physical phenomena involved in mass driving can now be modelized, at many different size scales. While most of models were previously based on informations derived from spectrophotometric data only or on measurements concerning objects observed with no spatial resolution, observations at much increased angular resolution can provide constraints on models of these phenomena. Theory and modelization must take this new situation into account. Two approaches are possible and effectively used. On the one hand, dynamical/physical self consistent models can be built; on the other hand, elaborate semi-empirical models including complicated distributions of matter with asymmetries (3D models) can be built and fitted for direct comparison with results of High Angular Resolution Measurements. Adding such constraints to classical constraints leads to a new insight in the physics of circumstellar matter and, through it, of stellar and interstellar evolution. Two examples have been chosen, in which new models are presented and assuming or not spherical symmetry is carefully discussed:

?Circumstellar matter around evolved stars

?Shock waves propagating in the circumstellar matter around evolved stars.

     

The hydrogen balmer lines and the structure of the quiet solar chromosphere

Spectra of Hα, Hβ and Hδ have been taken under good seeing conditions with the vacuum tower telescope of Sacramento Peak Observatory. Intensity curves are given at various wavelengths in these lines to permit further comparison with a theoretical model. Moreover, considering in each case the range of height in which the lines are almost optically thin and using a few approximations, the following results are derived: between 2000 and 6000 km above the limb the average thermal + turbulent velocity of the atoms is found to increase from 20 km s^?1 to 30 km s^?1 and the mean number of hydrogen atoms per cm³ in level 2 is given by $$\log n_2 {\text{ = }}4.5{\text{ }} - {\text{ 0}}{\text{.00056(}}z - 2000)$$ z being the altitude above the limb in km. For line profile computations a new interpolation formula is presented; it gives good profiles with a small number of scans, saving microphotometer time.     

Evaluation of magmatic processes for the products of the Nevado del Ruiz Volcano, Colombia from geochemical and petrological data

Trace-element concentrations of the eruptive products from the Nevado del Ruiz volcano indicate that at least for the last 1 Ma, the major controlling factor in the evolution of the magma has been a simple fractional crystallization.The Zr/Hf ratios suggest that the source material is mantle-like in origin and whilst subduction-related contamination of the source material has taken place, there is no evidence that assimilation of continental crust has affected the series.No convincing geochemical evidence for magma mixing was found, and data on banded pumices of Pleistocene, Historic and the 1985 eruptions strongly support a crystal fractionation model to explain the compositional variation of their glasses. Therefore, if mixing has taken place it can only be a mixing of layers within a stratified or partially stratified magma chamber.Modeling of fractional crystallization using a stepwise program has been undertaken and least-squares approximations with small residuals are commensurate with analyzed samples. Crystal fractionation models with plagioclase dominating two-pyroxenes and iron oxides give good fits for all calculations. We conclude that simple crystal fractionation is the process most consistent with major- and trace-element variations in the Ruiz series. This closed-system model requires at least 77% crystal fractionation of a basaltic parent to generate the observed compositions of dacites.