排序方式: 共有19条查询结果,搜索用时 15 毫秒
1.
The impact of diurnal variations of the heat fluxes from building and ground surfaces on the fluid flow and air temperature distribution in street canyons is numerically investigated using the PArallelized Large-eddy Simulation Model (PALM). Simulations are performed for a 3 by 5 array of buildings with canyon aspect ratio of one for two clear summer days that differ in atmospheric instability. A detailed building energy model with a three-dimensional raster-type geometry—Temperature of Urban Facets Indoor-Outdoor Building Energy Simulator (TUF-IOBES)—provides urban surface heat fluxes as thermal boundary conditions for PALM. In vertical cross-sections at the centre of the spanwise canyon the mechanical forcing and the horizontal streamwise thermal forcing at roof level outweigh the thermal forces from the heated surfaces inside the canyon in defining the general flow pattern throughout the day. This results in a dominant canyon vortex with a persistent speed, centered at a constant height. Compared to neutral simulations, non-uniform heating of the urban canyon surfaces significantly modifies the pressure field and turbulence statistics in street canyons. Strong horizontal pressure gradients were detected in streamwise and spanwise canyons throughout the day, and which motivate larger turbulent velocity fluctuations in the horizontal directions rather than in the vertical direction. Canyon-averaged turbulent kinetic energy in all non-neutral simulations exhibits a diurnal cycle following the insolation on the ground in both spanwise and streamwise canyons, and it is larger when the canopy bottom surface is paved with darker materials and the ground surface temperature is higher as a result. Compared to uniformly distributed thermal forcing on urban surfaces, the present analysis shows that realistic non-uniform thermal forcing can result in complex local airflow patterns, as evident, for example, from the location of the vortices in horizontal planes in the spanwise canyon. This study shows the importance of three-dimensional simulations with detailed thermal boundary conditions to explore the heat and mass transport in an urban area. 相似文献
2.
This study aims to provide knowledge on the thermo-mechanical behaviour of heat exchanger piles, through a laboratory scale model. The model pile (20 mm in external diameter) was embedded in dry sand. The behaviour of the axially loaded pile under thermal cycles was investigated. After applying the axial load on the pile head, the pile temperature was varied between 5 and 30 °C. Seven tests, corresponding to various axial loads ranging from 0 to 70 % of the pile estimated bearing capacity, were performed. The results on pile head displacement show that heating under low axial load induced heave and cooling induced settlement; the pile temperature-displacement curve was found to be reversible and compatible with the thermal expansion curve of the pile. However, at higher axial loads, irreversible settlement of the pile head was observed after a few thermal cycles. The axial load profile measured by the strain gauges evidenced that the pile head load was mainly transferred to the pile toe. Nevertheless, thermal cycles modified significantly the mobilised skin friction along the pile. The total pressure measured at various locations in the soil mass was also slightly influenced by the thermal cycles. 相似文献
3.
The ever‐increasing population in cities intensifies environmental pollution that increases the number of asthmatic patients. Other factors that may influence the prevalence of asthma are atmospheric parameters, physiographic elements and personal characteristics. These parameters can be incorporated into a model to monitor and predict the health conditions of asthmatic patients in various contexts. Such a model is the base for any asthma early warning system. This article introduces a novel ubiquitous health system to monitor asthmatic patients. Ubiquitous systems can be effective in monitoring asthmatic patients through the use of intelligent frameworks. They can provide powerful reasoning and prediction engines for analyzing various situations. Our proposed model encapsulates several tools for preprocessing, reasoning and prediction of asthma conditions. In the preprocessing phase, outliers in the atmospheric datasets were detected and missing sensor data were estimated using a Kalman filter, while in the reasoning phase, the required information was inferred from the raw data using some rule‐based inference techniques. The asthmatic conditions of patients were predicted accurately by a Graph‐Based Support Vector Machine in a Context Space (GBSVMCS) which functions anywhere, anytime and with any status. GBSVMCS is an improved version of the common Support Vector Machine algorithm with the addition of unlabeled data and graph‐based rules in a context space. Based on the stored value for a patient's condition and his/her location/time, asthmatic patients can be monitored and appropriate alerts will be given. Our proposed model was assessed in Region 3 of Tehran, Iran for monitoring three different types of asthma: allergic, occupational and seasonal asthma. The input data to our system included air pollution data, the patients’ personal information, patients’ locations, weather data and geographical information for 270 different situations. Our results showed that 90% of the system's predictions were correct. The proposed model also improved the estimation accuracy by 15% in comparison to conventional methods. 相似文献
4.
Neda Khanmohammadi Hossein Rezaie Majid Montaseri Javad Behmanesh 《Environmental Earth Sciences》2017,76(15):540
Temporal changes of meteorological variables can affect reference evapotranspiration (ET0). The goal of the present research is to analyze the changes of ET0 and identify the impact of effective meteorological parameters to the changes of ET0. For this purpose, daily meteorological data recorded in 30 synoptic stations of Iran during 1960–2014 were used. The annual and seasonal values of ET0 were calculated by the recorded data. To calculate ET0, FAO56 Penman–Monteith method (standard method) was used. The annual and seasonal trends of ET0 and its eight effective parameters were analyzed. Then the contributions of effective parameters changes on ET0 were determined. To analyze ET0 trend at annual and seasonal scales, two common methods, Spearman’s Rho and Mann–Kendall tests, were used. The R 2 = 0.99 showed that the results of the mentioned methods were similar and on the basis of T-statistic <0.057, their difference was not significant (95% confidence level). Therefore, only one method’s results (Spearman’s Rho) were reported. On the basis of Spearman’s Rho results, the annual and seasonal values of ET0 had negative trend in most of arid and semi-arid stations while the trend of this parameter was positive in humid and very humid stations. At annual and seasonal scales, decreasing in wind speed (W), temperature (T), sunshine hours (n), minimum temperature (TN), dew point temperature (TD), maximum temperature (TX), saturation vapor pressure deficit (SVPD) and solar radiation (RS) was observed in 58, 54, 39, 43, 56, 65, 65 and 37% studied stations, respectively. In many scales, the results showed that TX and W were the most effective meteorological variables on ET0 changes and then SVPD was located in second step in arid and semi-arid stations. In humid and very humid stations, W was the first effective parameter at all scales, except autumn. 相似文献
5.
The Cercis siliquastrum tree leaves are introduced as a low cost biosorbent for removal of Ag(I) from aqueous solution in a batch system. FT‐IR, XRD analysis, and potentiometric titration illustrate that the adsorption took place and the acidic functional group (carboxyl) of the sorbent was involved in the biosorption process. In addition, it was observed that the pH beyond pHpzc 4.4 is favorable for the removal procedure. The effect of operating variables such as initial pH, temperature, initial metal ion concentration, and sorbent mass on the Ag(I) biosorption was analyzed using response surface methodology (RSM). The proposed quadratic model resulting from the central composite design approach (CCD) fitted very well to the experimental data. The optimum condition obtained with RSM was an initial concentration of Ag(I) of 85 mg L?1, pH = 6.3 and sorbent mass 0.19 g. The applicability of different kinetic and isotherm models for current biosorption process was evaluated. The isotherm, kinetic, and thermodynamic studies showed the details of sorbate‐sorbent behavior. The competitive effect of alkaline and alkaline earth metal ions during the loading of Ag(I) was also considered. 相似文献
6.
Ulmus carpinifolia tree leaves were successfully used to remove Tl(I) from aqueous solution in a batch system. In order to improve the uptake capacity of sorbent, it was modified by various chemical agents such as NaOH, HNO3, NH3, NaCl, NaHCO3, and CaCl2. Among the modifiers, NaCl was the best. Equilibrium behavior of sorbent with Tl(I) was examined by the several isotherms. Considering modified U. carpinifolia equilibrium data fitted well to the Langmuir model with maximum capacity of 54.6 mg/g. The other isotherms such as: Freundlich and Dubinin‐Redushkevich (D‐R) models were also examined. The central composite design (CCD) was successfully employed for optimization of biosorption process. An empirical model was given through using response surface methodology. Also its validation was recognized by using relevant statistical tests such as ANOVA. The optimum conditions of biosorption: pH, m (amount of sorbent) and C (initial concentration) were found to be 7.9, 11.4 g/L, and 8.8 mg/L, respectively. On the other hand thermodynamic parameters: ΔG, ΔH, and ΔS were evaluated: the obtained results show that biosorption process was spontaneous and exothermic. Eventually, FT‐IR analysis confirmed that the main functional groups of sorbent have been involved through the biosorption process. 相似文献
7.
8.
Grade estimation is an important phase of mining projects, and one that is considered a challenge due in part to the structural complexities in mineral ore deposits. To overcome this challenge, various techniques have been used in the past. This paper introduces an approach for estimating Au ore grades within a mining deposit using k-means and principal component analysis (PCA). The Khooni district was selected as the case study. This region is interesting geologically, in part because it is considered an important gold source. The study area is situated approximately 60 km northeast of the Anarak city and 270 km from Esfahan. Through PCA, we sought to understand the relationship between the elements of gold, arsenic, and antimony. Then, by clustering, the behavior of these elements was investigated. One of the most famous and efficient clustering methods is k-means, based on minimizing the total Euclidean distance from each class center. Using the combined results and characteristics of the cluster centers, the gold grade was determined with a correlation coefficient of 91%. An estimation equation for gold grade was derived based on four parameters: arsenic and antimony content, and length and width of the sampling points. The results demonstrate that this approach is faster and more accurate than existing methodologies for ore grade estimation. 相似文献
9.
Excessive extraction of groundwater leads to (irreversible) changes in the physical soil properties, causing land subsidence associated with soil compaction to occur. Using a combined image processing and field approach, we examined: (1) how variation in the land subsidence rate induces different soil compaction degrees; and (2) the response patterns of microbial communities to such variations. By using Sentinel Synthetic Aperture Radar image processing, we selected three locations that exhibited different land subsidence rates, including high (HSR), moderate (MSR), and low (LSR). Then, soil sampling was undertaken within these representative locations. Indicators of soil compaction, including total porosity, air-filled porosity, water-filled porosity, and bulk density, were measured. The soil microbial community was determined using qPCR and sequencing. The highest and lowest values for bulk density were observed in the HSR–MSR and LSR zones, respectively. The greatest values of total porosity and macropore volume were displayed in the LSR zone compared to other zones. Bacterial abundance in the LSR zone was significantly greater than that in the HSR and MSR zones. The relative abundances of bacterial taxa indirectly demonstrated that the anaerobic phyla were significantly increased (by 10–13%), and the aerobic phyla decreased (by 30–40%) in the HSR zone compared to the LSR zone. This result demonstrates that the aerobes declined as larger volumes of the soil became more anaerobic. Indeed, the increased abundance of anaerobes was not able to compensate for the larger decrease in the abundance of aerobes. Our work showed that at the increased rates of land subsidence, the abundance distribution of the microbial community critically declined. These findings highlight the critical impacts of increasing the land subsidence rate on the emergence of high soil compaction degrees, which can significantly affect the resilience thresholds of the microbial communities in dryland soils. 相似文献
10.
Martial Haeffelin Jean-Charles Dupont Neda Boyouk Darrel Baumgardner Laurent Gomes Greg Roberts Thierry Elias 《Pure and Applied Geophysics》2013,170(12):2283-2303
Fog is an atmospheric phenomenon that has important environmental consequences related to visibility, air quality and climate change on local and regional scales. The formation of radiation fog results from a complex balance between surface radiative cooling, turbulent mixing in the surface layer, aerosol growth by deliquescence and activation of fog droplets. During the ParisFog field experiment, out of 16 events forecasted for radiation fog, activated fog materialized in seven events, while in five other events the visibility dropped to 1–2 km but haze particle size remained below the critical size of activation. To better understand the conditions that lead to or do not lead to sustained fog droplet activation, we performed a comparative study of dynamic, thermal, radiative and microphysical processes occurring between sunset and fog (or quasi-fog) onset. We selected two radiation fog events and two quasi-radiation fog events that occurred under similar large-scale conditions for this comparative study. We identified that aerosol growth by deliquescence and droplet activation actually occurred in both quasi-fog events, but only during <1 h. Based on ParisFog measurements, we found that the main factors limiting sustained activation of droplets at fog onset in the Paris metropolitan area are (1) lack of mixing in the surface layer (typically wind speed <0.5 ms?1), (2) relative humidity exceeding 90 % throughout the residual layer, (3) low cooling rate in the surface layer (typically less than ?1 °C per hour on average) due to weak radiative cooling (0 to ?30 Wm?2) and near zero sensible heat fluxes, and (4) a combination of the three factors listed above during the critical phase of droplet activation preventing the transfer of cooling from the surface to the liquid layer. In addition, we found some evidence of contrasted aerosol growth by deliquescence under high relative humidity conditions in the four events, possibly associated with the chemical nature of the aerosols, which could be another factor impacting droplet activation. 相似文献