Inundation and flow properties of a runoff-generated debris flow following successive high-severity wildfires in northern Arizona,USA

Burned slopes are susceptible to runoff-generated debris flows in the years following wildfire due to reductions in vegetation cover and soil infiltration capacity. Debris flows can pose serious threats to downstream communities, so quantifying variations in flow properties along debris-flow runout paths is needed to improve both conceptual and quantitative models of debris-flow behaviour to help anticipate and mitigate the risk associated with these events. Changes in flow properties along the runout paths of the runoff-generated debris flows that follow fire may be particularly dramatic, since they initiate when a water-dominated flow rapidly entrains sediment and later transition back to a water-dominated flow once they reach greater drainage areas and lower slopes. Here, we study the properties of a debris flow that initiated 1 month following the 2022 Pipeline Fire in northern Arizona, USA. We categorized flow type into two classes, granular debris flow and muddy debris flow, along the 7-km runout path and examined how flow properties varied between the phases. Changes in channel gradient and confinement likely facilitated the transition between the flow phases, which were characterized by significant differences in maximum clast size, but similar clay content and fine fractions. We also found that the volume and runout distance of the debris flow were 28 and six times greater, respectively, than that of a debris flow that initiated in the same watershed following a fire 12 years earlier. We attribute these differences to the combined effects of two high-severity fires, suggesting that consideration of recent fire history could improve post-fire debris-flow hazard assessments. Results of this study provide quantitative constraints on changes in post-fire debris-flow properties along a runout path. Data collected in this study add to a small number of debris-flow inundation datasets that can be used to test runout models in post-fire settings.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Spectrophotometric pH measurement in estuaries using thymol blue and m-cresol purple

The conditional acid dissociation constants (pK_a′) of two sulfonephthalein dyes, thymol blue (TB) and m-cresol purple (mCP), were assessed throughout the estuarine salinity range (0<S<40) using a tris/tris–HCl buffer and spectrophotometric measurement. The salinity dependence of the pK_a′ of both dyes was fitted to the equations (25 °C, total proton pH scale, mol kg soln⁻¹):

The estimated accuracy of pH measurements using these calculated pK_a′ values is considered to be comparable to that possible with careful use of a glass electrode (±0.01 pH unit) but spectrophotometric measurements in an estuary have the significant advantage that it is not necessary to calibrate an electrode at different salinities. pH was measured in an estuary over a tidal cycle with a precision of ±0.0005 pH unit at high (S>30) salinity, and ±0.002 pH unit at low (S<5) salinity. The pH increased rapidly in the lower salinity ranges (0<S<15) but less rapidly at higher salinities.     

The fusion crust of the Winchcombe meteorite: A preserved record of atmospheric entry processes

Fusion crusts form during the atmospheric entry heating of meteorites and preserve a record of the conditions that occurred during deceleration in the atmosphere. The fusion crust of the Winchcombe meteorite closely resembles that of other stony meteorites, and in particular CM2 chondrites, since it is dominated by olivine phenocrysts set in a glassy mesostasis with magnetite, and is highly vesicular. Dehydration cracks are unusually abundant in Winchcombe. Failure of this weak layer is an additional ablation mechanism to produce large numbers of particles during deceleration, consistent with the observation of pulses of plasma in videos of the Winchcombe fireball. Calving events might provide an observable phenomenon related to meteorites that are particularly susceptible to dehydration. Oscillatory zoning is observed within olivine phenocrysts in the fusion crust, in contrast to other meteorites, perhaps owing to temperature fluctuations resulting from calving events. Magnetite monolayers are found in the crust, and have also not been previously reported, and form discontinuous strata. These features grade into magnetite rims formed on the external surface of the crust and suggest the trapping of surface magnetite by collapse of melt. Magnetite monolayers may be a feature of meteorites that undergo significant degassing. Silicate warts with dendritic textures were observed and are suggested to be droplets ablated from another stone in the shower. They, therefore, represent the first evidence for intershower transfer of ablation materials and are consistent with the other evidence in the Winchcombe meteorite for unusually intense gas loss and ablation, despite its low entry velocity.     

HST observations of azimuthal asymmetry in Saturn's rings

From 378 Hubble Space Telescope WFPC2 images obtained between 1996-2004, we have measured the detailed nature of azimuthal brightness variations in Saturn's rings. The extensive geometric coverage, high spatial resolution (), and photometric precision of the UBVRI images have enabled us to determine the dependence of the asymmetry amplitude and longitude of minimum brightness on orbital radius, ring elevation, wavelength, solar phase angle, and solar longitude. We explore a suite of dynamical models of self-gravity wakes for two particle size distributions: a single size and a power law distribution spanning a decade in particle radius. From these N-body simulations, we calculate the resultant wake-driven brightness asymmetry for any given illumination and viewing geometry. The models reproduce many of the observed properties of the asymmetry, including the shape and location of the brightness minimum and the trends with ring elevation and solar longitude. They also account for the “tilt effect” in the A and B rings: the change in mean ring brightness with effective ring opening angle, |Beff|. The predicted asymmetry depends sensitively on dynamical ring particle properties such as the coefficient of restitution and internal mass density, and relatively weakly on photometric parameters such as albedo and scattering phase function. The asymmetry is strongest in the A ring, reaching a maximum amplitude A∼25% near a=128,000 km. Here, the observations are well-matched by an internal particle density near 450 kg m⁻³ and a narrow particle size distribution. The B ring shows significant asymmetry (∼5%) in regions of relatively low optical depth (τ∼0.7). In the middle and outer B ring, where τ?1, the asymmetry is much weaker (∼1%), and in the C ring, A<0.5%. The asymmetry diminishes near opposition and at shorter wavelengths, where the albedo of the ring particles is lower and multiple-scattering effects are diminished. The asymmetry amplitude varies strongly with ring elevation angle, reaching a peak near |Beff|=10° in the A ring and at |Beff|=15-20° in the B ring. These trends provide an estimate of the thickness of the self-gravity wakes responsible for the asymmetry. Local radial variations in the amplitude of the asymmetry within both the A and B rings are probably caused by regional differences in the particle size distribution.     

Solar shield: forecasting and mitigating space weather effects on high-voltage power transmission systems

In this paper, central elements of the Solar Shield project, launched to design and establish an experimental system capable of forecasting the space weather effects on high-voltage power transmission system, are described. It will be shown how Sun–Earth system data and models hosted at the Community Coordinated Modeling Center (CCMC) are used to generate two-level magnetohydrodynamics-based forecasts providing 1–2 day and 30–60 min lead-times. The Electric Power Research Institute (EPRI) represents the end-user, the power transmission industry, in the project. EPRI integrates the forecast products to an online display tool providing information about space weather conditions to the member power utilities. EPRI also evaluates the economic impacts of severe storms on power transmission systems. The economic analysis will quantify the economic value of the generated forecasting system. The first version of the two-level forecasting system is currently running in real-time at CCMC. An initial analysis of the system’s capabilities has been completed, and further analysis is being carried out to optimize the performance of the system. Although the initial results are encouraging, definite conclusions about system’s performance can be given only after more extensive analysis, and implementation of an automatic evaluation process using forecasted and observed geomagnetically induced currents from different nodes of the North American power transmission system. The final output of the Solar Shield will be a recommendation for an optimal forecasting system that may be transitioned into space weather operations.     

Investigating the igneous petrogenesis of Martian volcanic rocks using augite quantitative textural analysis of the Yamato nakhlites

To better understand volcanism on planetary bodies other than the Earth, the quantification of physical processes is needed. Here, the petrogenesis of the achondrite Martian Yamato (Y) nakhlites (Y 000593, Y 000749, and Y 000802) is reinvestigated via quantitative analysis of augite (high-Ca clinopyroxene) phenocrysts: crystal size distribution (CSD), spatial distribution patterns (SDP), and electron backscatter diffraction (EBSD). Results from CSD and EBSD quantitative data sets show augite to have continuous uninterrupted growth resulting in calculated minimum magma chamber residence times of either 88–117 ± 6 yr or 9–12 yr. All samples exhibit low-intensity S-LS type crystallographic preferred orientation. Directional strain is observed across all samples with intracrystalline misorientation patterns indicative of (100)[001]:(001)[100] (Y 000593 and Y 000802) and {110}<001>or {110}¹/₂<110> (Y 000749) slip systems. SDP results indicate phenocryst-bearing crystal-clustered rock signatures. Combined findings from this work show that the Yamato nakhlites formed on Mars as individual low-viscosity lava flows or sills. This study shows that through combining these different quantitative techniques over multiple samples, one can more effectively compare and interpret resulting data to gain a more robust, geologically contextualized petrogenetic understanding of the rock suite being studied. The techniques used in this study should be equally applicable to igneous achondrites from other parent bodies.     

French marine technology policy : Industrializing ocean depths

This paper outlines the structure of the institutions involved in scientific and technological development in France. It points to new trends in French marine policy, and gives details of the country's offshore petroleum technology and nodule mining.     

Meridiani Planum hematite deposit and the search for evidence of life on Mars—iron mineralization of microorganisms in rock varnish

The extensive hematite deposit in Meridiani Planum was selected as the landing site for the Mars Exploration Rover Opportunity because the site may have been favorable to the preservation of evidence of possible prebiotic or biotic processes. One of the proposed mechanisms for formation of this deposit involves surface weathering and coatings, exemplified on Earth by rock varnish. Microbial life, including microcolonial fungi and bacteria, is documented in rock varnish matrices from the southwestern United States and Australia. Limited evidence of this life is preserved as cells and cell molds mineralized by iron oxides and hydroxides, as well as by manganese oxides. Such mineralization of microbial cells has previously been demonstrated experimentally and documented in banded iron formations, hot spring deposits, and ferricrete soils. These types of deposits are examples of the four “water-rock interaction” scenarios proposed for formation of the hematite deposit on Mars. The instrument suite on Opportunity has the capability to distinguish among these proposed formation scenarios and, possibly, to detect traces that are suggestive of preserved martian microbiota. However, the confirmation of microfossils or preserved biosignatures will likely require the return of samples to terrestrial laboratories.     

Diurnal variation of electron density in Saturn’s ionosphere: Model comparisons with Saturn Electrostatic Discharge (SED) observations

Using the Saturn Thermosphere Ionosphere Model (STIM), we present a study of the diurnal variation of electron density, with a focus on comparisons with peak electron densities (N_MAX) inferred from the low-frequency cutoff of radio emission due to lightning in the lower atmosphere, called Saturn Electrostatic Discharges (SEDs). It is demonstrated that photochemistry in Saturn’s ionosphere cannot reproduce the SED-inferred diurnal variation in N_MAX unless additional production and loss sources outside of the current best estimates are considered. Additional explanations of the SED-inferred diurnal variation of N_MAX are presented and analyzed, such as the possibility that the low-frequency cutoff seen in SEDs is due to the presence of sharp low-altitude layers of plasma, as frequently seen in radio occultation measurements. Finally, we outline the observational constraints that must be fulfilled by any candidate explanations of the SED-inferred diurnal variation of N_MAX.