An experimental study in forming a long synthetic aperture at sea

The testing of a synthetic aperture technique, the ETAM algorithm, is extended and its performance for CW pseudorandom signals and broadband ship noise is examined. The results show the limitations of the technique and are of special interest for operational systems development. In the CW experiments, the transmitted signal was generated with high temporal coherence, and loss of the spatial and temporal coherence of the received signal was introduced only by the medium and the stability of the towed array. In the experiments that included the pseudorandom signal and the ship noise, the temporal coherence of the transmitted signals was deliberately chosen to be poor in order to study the effects and the performance of this algorithm with broadband signals. The related experimental results show that for received signals, which have their segments over the synthesizing period highly cross-correlated, a synthetic aperture array gain was achieved that corresponds to the length of an equivalent fully populated array     

Evolution of nappes in the eastern margin of the Bohemian Massif: a kinematic interpretation

The entire pile of nappes in the eastern margin of the Bohemian massif is characterized by two stages of Variscan nappe emplacement each exhibiting a different kinematic and metamorphic evolution.The older emplacement (D1) probably occurred around 350-340 Ma ago and was synmetamorphic. The nappes show a typical systematic superposition of higher grade metamorphic units over lower grade ones. Thus, the crystalline complexes showing a HT-MP Barrovian imprint (Svratka allochthonous unit and Moldanubicum) were thrust over an intermediate unit affected by MTMP recrystallization (Bíte orthogneiss and its country rock), and at the base of the D1 nappe pile the Inner Phyllite Nappe (Biý Potok Unit) is characterized by LT/LP metamorphism.The second stage of tectonic evolution (D2) is characterized by a thin-skinned northward-oriented nappe emplacement that occurred under LT-LP conditions dated at 320-310 Ma. The whole nappe sequence formed during the first tectonometamorphic period (D1) was transported northward over the autochthonous »Deblín polymetamorphic and granitic complex« of Upper Proterozoic age and its Devonian sedimentary cover with very low metamorphism. During this second tectonic event the Brno granite massif (580 Ma) was only marginally incorporated in the Variscan nappe tectonics which resulted in kilometer-scale cover and basement duplexes. The tectonic evolution of the nappe pile ended with stage D3, represented by large- to medium-scale east-vergent folds with limited displacement.

---

Zusammenfassung Der Deckenbau am Ostrand der Böhmischen Masse erfolgte in zwei aufeinanderfolgenden Stadien, die sich sowohl in ihrer Kinematik als auch in ihrer Metamorphoseentwicklung deutlich voneinander unterschieden.Die ältere Phase (D1 ca. 350-340 Ma) ist durch synmetamorphe Überschiebungen charakterisiert. Sie führt zu einer metamorphen Inversion der überschobenen Deckeneinheiten, so daß generell hohe metamorphe Einheiten schwach metamorphe tektonisch überlagern. Der Svratka Komplex und das Moldanubikum als hangendste Decken sind durch MP/HT Paragenesen vom Barrow-Typ gekennzeichnet. Beide Einheiten sind auf den MP/MT-metamorphen Bite-Gneis und seine Rahmengesteine überschoben. Die Bílý potok Einheit als liegende Decke zeigt nur noch eine LP/ LT Regionalmetamorphose.Das jüngere Stadium (D2 ca. 320-310 Ma) ist durch eine Thin-skinned Tektonik mit nordvergentem Deckentransport unter LP/LT Bedingungen charakterisiert. Der gesamte, invers metamorphe D1-Deckenstapel wird dabei nach N über den autochtonen Deblín Komplex bzw. seine devonische Sedimenthülle überschoben.Das Brno Granit Massiv (580 Ma) wird nur randlich in diesen variszischen Deckenbau einbezogen. Die tektonische Entwicklung endet mit einem mittel bis großräumigen E-vergenten Faltenbau (D3 phase).

---

Résumé L'empilement des nappes a la bordure orientale du Massif de Bohème est caractérisé par deux stades de mise en place présentant différentes évolutions cinématiques et métamorphiques.La tectonique majeure de mise en place des nappes crustales intervient lors d'un métamorphisme de type barrowien, calé autour de 350-340 Ma. L'empilement qui en résulte montre une superposition systématique d'unités à fort degré de métamorphisme sur des unités moins métamorphiques. Ainsi les complexes cristallins, montrant des reliques de métamorphisme de haute à moyenne pression-haute température (unités cristallines de Svratka et du Moldanubien), chevauchent une unité intermédiaire affectée par un métamorphisme de moyenne à basse pression-moyenne température (l'orthogneiss de Bíte et son encaissant). A la base de cette pile édifiée durant la tectonique D1, l'unité des phyllites internes (unité de Bílý potok) est caractérisée par un métamorphisme de basse témperature-basse pression.Le second stade D2 de l'évolution tectonique est caractérisé par une tectonique pelliculaire à vergence nord datée à 320-310 Ma. L'empilement résultant de D1 est ainsi transporté vers le nord, au dessus du complexe autochtone d'âge protérozoïque supérieur (groupe de Deblín) et sa couverture sédimentaire dévonienne très faiblement métamorphisée.Le massif granitique de Brno (580 Ma) n'est que marginalement incorporé à cette tectonique de nappe varisque. Ceci se traduit par des duplex socle-couverture d'échelle plurikilométrique. L'évolution tectonique s'achève lors d'une troisième phase, marquée par de grands plis à vergence est. Le déplacement associé est alors d'amplitude limitée.

---

, . , 350-340 . . , , - ( ), , - ( ). , D 1, (- ) - . D 2 , 320-310 ., D 1, , , ( ) . (580 . ) , »« -, . , .

     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.     

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.     

Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.     

From in-situ coal to fly ash: a study of coal mines and power plants from Indiana

This paper presents data on the properties of coal and fly ash from two coal mines and two power plants that burn single-source coal from two mines in Indiana. One mine is in the low-sulfur (<1%) Danville Coal Member of the Dugger Formation (Pennsylvanian) and the other mines the high-sulfur (>5%) Springfield Coal Member of the Petersburg Formation (Pennsylvanian). Both seams have comparable ash contents (11%). Coals sampled at the mines (both raw and washed fractions) were analyzed for proximate/ultimate/sulfur forms/heating value, major oxides, trace elements and petrographic composition. The properties of fly ash from these coals reflect the properties of the feed coal, as well as local combustion and post-combustion conditions. Sulfur and spinel content, and As, Pb and Zn concentrations of the fly ash are the parameters that most closely reflect the properties of the source coal.     

Characterizing and classifying urban watersheds with compositional and structural attributes

Current land-use classifications used to assess urbanization effects on stream water quality date back to the 1980s when limited information was available to characterize watershed attributes that mediate non-point source pollution. With high resolution remote sensing and widely used GIS tools, there has been a vast increase in the availability and precision of geospatial data of built environments. In this study, we leverage geospatial data to expand the characterization of developed landscapes and create a typology that allows us to better understand the impact of complex developed landscapes across the rural to urban gradient. We assess the ability of the developed landscape typology to reveal patterns in stream water chemistry previously undetected by traditional land-cover based classification. We examine the distribution of land-cover, infrastructure, topography and geology across 3876 National Hydrography Dataset Plus catchments in the Piedmont region of North Carolina, USA. From this dataset, we generate metrics to evaluate the abundance, density and position of landscape features relative to streams, catchment outlets and topographic wetness metrics. While impervious surfaces are a key distinguishing feature of the urban landscape, sanitary infrastructure, population density and geology are better predictors of baseflow stream water chemistry. Unsupervised clustering was used to generate a distinct developed landscape typology based on the expanded, high-resolution landscape feature information. Using stream chemistry data from 37 developed headwater catchments, we compared the baseflow water chemistry grouped by traditional land-cover based classes of urbanization (rural, low, medium and high density) to our composition and structure-based classification (a nine-class typology). The typology based on 22 metrics of developed landscape composition and structure explained over 50% of the variation in NO₃⁻-N, TDN, DOC, Cl⁻, and Br⁻ concentration, while the ISC-based classification only significantly explained 23% of the variation in TDN. These results demonstrate the importance of infrastructure, population and geology in defining developed landscapes and improving discrete classes for water management.     

A reconstruction of the palaeohydrological conditions of a flood‐plain: a multi‐proxy study from the Grabia River valley mire,central Poland

This study investigated the Grabia River valley mire in central Poland to reconstruct its palaeoenvironmental conditions from the Younger Dryas to the present. We analysed sedimentological, biological and geochemical data from the palaeo‐oxbow lake and valley mire to identify the principal hydrological trends, especially episodes of high water level. During the Lateglacial and Holocene, the Grabia River had a meandering channel, and its hydraulic parameters and the channel dimensions changed in response to climatic oscillations and vegetation development. We identified phases of high flood intensity and high groundwater level that correlate with regional and supraregional climatic events. The frequency and timing of palaeohydroclimatic oscillations show strong similarities to records from other sites in Poland and the rest of Europe. We show that various analytical methods, namely, pollen, plant macrofossils, Cladocera, Chironomidae, sedimentological, geochemical and radiocarbon data, can be effective tools for reconstructing past hydroclimatic changes in palaeo‐oxbow lakes and investigating the effects of past climate changes on river environments. The high sensitivity of the biota, especially Cladocera, to changes in water level permits the reconstruction of palaeoecological changes, especially flood episodes that occurred in the river valley. In particular, the increase in the proportion of sediment‐associated Cladocera and pelagic taxa was closely correlated with floods. Through comparisons with the palaeobiological data, geochemical data allowed the identification of humid phases within the fen associated with a rising groundwater table, direct fluvial activity (floods) and alluvial deposition. We also discuss the limitations of palaeohydrological reconstructions based on these proxies, especially on fossil aquatic invertebrates.     

Root‐zone moisture replenishment in a native vegetated catchment under Mediterranean climate

The root‐zone moisture replenishment mechanisms are key unknowns required to understand soil hydrological processes and water sources used by plants. Temporal patterns of root‐zone moisture replenishment reflect wetting events that contribute to plant growth and survival and to catchment water yield. In this study, stable oxygen and hydrogen isotopes of twigs and throughfall were continuously monitored to characterize the seasonal variations of the root‐zone moisture replenishment in a native vegetated catchment under Mediterranean climate in South Australia. The two studied hillslopes (the north‐facing slope [NFS] and the south‐facing slope [SFS]) had different environmental conditions with opposite aspects. The twig and throughfall samples were collected every ~20 days over 1 year on both hillslopes. The root‐zone moisture replenishment, defined as percentage of newly replenished root‐zone moisture as a complement to antecedent moisture for plant use, calculated by an isotope balance model, was about zero (±25% for the NFS and ± 15% for the SFS) at the end of the wet season (October), increased to almost 100% (±26% for the NFS and ± 29% for the SFS) after the dry season (April and May), then decreased close to zero (±24% for the NFS and ± 28% for the SFS) in the middle of the following wet season (August). This seasonal pattern of root‐zone moisture replenishment suggests that the very first rainfall events of the wet season were significant for soil moisture replenishment and supported the plants over wet and subsequent dry seasons, and that NFS completed replenishment over a longer time than SFS in the wet season and depleted the root zone moisture quicker in the dry season. The stable oxygen isotope composition of the intraevent samples and twigs further confirms that rain water in the late wet season contributed little to root‐zone moisture. This study highlights the significant role of the very first rain events in the early wet season for ecosystem and provides insights to understanding ecohydrological separation, catchment water yield, and vegetation response to climate changes.