Interpretation of single-well tracer tests using fractional-flow dimensions. Part 1: Theory and mathematical models

Generalized equations using fractional-flow dimensions were derived to estimate the Darcy and seepage velocities obtained from the point-dilution and the single-well injection-withdrawal field tests conducted in fractured-rock aquifers. Seepage velocities can only be estimated from single-well tests if the hydraulic conductivity and the hydraulic gradient are known a priori. However, if a radial-convergent test is also performed between two boreholes, the kinematic porosity can be estimated and be used to estimate the seepage velocity from the single-well test results. To apply the generalized equations, the flow dimension and the extent of the flow region must be known. Therefore, the generalized radial flow (GRF) model of Barker (1988; a generalized radial flow model for hydraulic tests in fractured rock. Water Resour Res 24(10):1796–1804) is used to estimate the flow dimension because of its wide range of applications. A pumping test performed on the boreholes will yield an estimate of the fractional-flow dimension by applying the GRF model. Electronic Publication     

Streams in the Harz National Parks (Germany) — a hydrochemical and hydrobiological evaluation

Between 1995 and 2001, 16 measuring points at small and medium sized brooks in the Harz National Parks were sampled. The samples have been evaluated by means of hydrochemistry and macroinvertebrate biology. Although nearly all streams are largely uncontaminated by oxygen-consuming substances, they are settled only by a small number of macroinvertebrate species. There is a clear correlation between this number and pH. The reduction in species number with decrease of pH is mainly caused by the absence of most Ephemeroptera, some Coleoptera and Trichoptera. Comparing biological evaluation of acidity with physico-chemical measurements, a unacceptable underestimation was found. The reason could be that different sensitivities to acidification between regional populations seem to exist.

Despite of the low species number, there is a very specific macroinvertebrate fauna that emphasizes the conservation value of the Harz National Parks.     

Correlation between hydrogen isotope ratios of lipid biomarkers and sediment maturity

We investigated the influence of thermal maturity on the hydrogen isotope ratios of sedimentary hydrocarbons to prove that the isotope ratio of hydrocarbons mirrors paleoclimate signatures. δD values from n-alkanes and acyclic isoprenoids of two sediment sections (Kupferschiefer [KS], 258 Ma, and Posidonienschiefer [PS], 184 Ma) with different maturation history were investigated. Both covered thermal maturity from 0.48 to 1.3 R_c (vitrinite reflectance and reflectance calculated from MPI1). Sediment burial up to 4500 m caused thermal maturation of organic matter in the KS horizon from the Early Zechstein basin of Poland, whereas contact metamorphic thermal maturation originated in the Early Toarcian PS (Posidonienschiefer) of the North German Vlotho Massif. The δD values of the extracted n-alkanes positively correlate with thermal maturity in the KS (y = 56‰ × MPI1[x] − 160‰ [VSMOW]) and in the PS (y = 104‰ × MPI1[x] − 200‰ [VSMOW]). The δD values of isoprenoids (i.e., pristane, phytane) were even more enriched with increasing maturity (y = 179‰ × MPI1[x] − 341‰ [VSMOW] in the KS; y = 300‰ × MPI1[x] − 415‰ [VSMOW] in PS).These results explain why isotope ratios of n-alkanes and isoprenoids in mature sediments are generally enriched in D and do not have the expected isotopic difference between n-alkanes and isoprenoids of ∼190‰. Moreover, the correlation between sediment maturity parameters and δD values suggests that after correction the δD values of n-alkanes can be used to reconstruct climate and environment in the geological past.     

Solubility of KFe(CrO4)2·2H2O at 4–75°C

The solubility of KFe(CrO₄)₂·2H₂O, a precipitate recently identified in a Cr(VI)-contaminated soil, was studied in dissolution and precipitation experiments. Ten dissolution experiments were conducted at 4–75°C and initial pH values between 0.8 and 1.2 using synthetic KFe(CrO₄)₂·2H₂O. Four precipitation experiments were conducted at 25°C with final pH values between 0.16 and 1.39. The log K_SP for the reaction

相似文献   

Distribution, characterization, and geochemical controls of elements of concern in uranium mine tailings, Key Lake, Saskatchewan, Canada

The distribution of As, Mo, Ni and Se in the aqueous and solid phases of U mine tailings in the Deilmann Tailings Management Facility (DTMF), located at the Key Lake mine in northern Saskatchewan, Canada, was defined using as-discharged tailings samples collected monthly starting in 1996 and core samples collected from the DTMF from 3 locations on 3 occasions between 2004 and 2009. These data indicated that the DTMF can be divided into two geochemical zones; tailings generated from the Deilmann ore body between 1996 and 2000 and tailings from the McArthur River ore body, mined after July 2000. The Deilmann tailings solids are generally characterized by greater elemental concentrations than those in the McArthur River tailings, particularly for As, Co and Ni. These elevated concentrations are attributed to the abundance of Ni–Co–As–S minerals in this ore. The mean aqueous concentrations of As, Mo, Ni, and Se are 3.7, 23.2, 0.14, and 0.02 mg L⁻¹, respectively, in the Deilmann porewaters and 0.20, 4.16, 0.06, and 0.03 mg L⁻¹, respectively, in the McArthur River porewaters. Similarly, the mean As, Mo, Ni, and Se solid phase concentrations are 5.89 × 10³, 69.9, 3.20 × 10³, and 17.4 μg g⁻¹, respectively, for the Deilmann tailings and 440, 13.6, 551, and 3.03 μg g⁻¹ in the McArthur River tailings. Statistically, pH remained unchanged from the time of discharge while Eh values have remained oxic with no significant change between the two tailings types over 15 a of residence time. Results from sequential extractions, thermodynamic modeling, and results of complimentary research indicated that ferrihydrite solubility is the dominant control on aqueous As concentrations and also plays a role in controlling dissolved Mo, Ni and Se.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Cathodoluminescence of authigenic albite

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).     

Methane and sulfide fluxes in permanent anoxia: In situ studies at the Dvurechenskii mud volcano (Sorokin Trough, Black Sea)

The Dvurechenskii mud volcano (DMV) is located in permanently anoxic waters at 2060 m depth (Sorokin Trough, Black Sea). The DMV was studied during the RV Meteor expedition M72/2 as an example of an active mud volcano system, to investigate the significance of submarine mud volcanism for the methane and sulfide budget of the anoxic Black Sea hydrosphere. Our studies included benthic fluxes of methane and sulfide, as well as the factors controlling transport, consumption and production of both compounds within the sediment. The pie-shaped mud volcano showed temperature anomalies as well as solute and gas fluxes indicating high fluid flow at its summit north of the geographical center. The anaerobic oxidation of methane (AOM) coupled to sulfate reduction (SR) was repressed in this zone due to the upward flow of sulfate-depleted fluids through recently deposited subsurface muds, apparently limiting microbial methanotrophic activity. Consequently, the emission of dissolved methane into the water column was high, with an estimated rate of 0.46 mol m⁻² d⁻¹. On the wide plateau and edge of the mud volcano surrounding the summit, fluid flow and total methane flux were lower, allowing higher SR and AOM rates correlated with an increase in sulfate penetration into the sediment. Here, between 50% and 70% of the methane flux (0.07-0.1 mol m⁻² d⁻¹) was consumed within the upper 10 cm of the sediment. The overall amount of dissolved methane released from the entire mud volcano structure into the water column was significant with a discharge of 1.3 × 10⁷ mol yr⁻¹. The DMV maintains also high areal rates of methane-fueled sulfide production and emission of on average 0.05 mol m⁻² d⁻¹. This is a difference to mud volcanoes in oxic waters, which emit similar amounts of methane, but not sulfide. However, based on a comparison of this and other mud volcanoes of the Black Sea, we conclude that sulfide and methane emission into the hydrosphere from deep-water mud volcanoes does not significantly contribute to the sulfide and methane inventory of the Black Sea.