New compositional and optical data for antimonian and bismuthian varieties of hemusite from Japan

Summary New compositional and optical data are reported for antimonian and antimonianbismuthian varieties of hemusite from epithermal Au-Ag-Cu deposits in Japan. The empirical formula for the antimonian variety, from the Iriki mine is: (Cu_5.83Fe_0.14Ag_0.01)_5.98Mo_1.03(Sn_0.54Sb_0.41Te_0.03Bi_0.02)_1.00(S_7.85Se_0.15)_8.00, and that of the Sb-Bi variety from the Kawazu mine is: (Cu_5.84Fe_0.14Ag_0.01)_5.99Mo_1.03(Sn_0.82Sb_0.11Bi_0.l0Te_0.04)_1.07(S_7.80Se_0.12)_7.92. The theoretical formula of hemusite is Cu⁺ ₄Cu²⁺ ₂MO⁴⁺Sn⁴⁺S₈, whilst the most probable formula of the Iriki hemusite is Cu⁺ _4.5CU²⁺ _1.5Mo⁴⁺Sn⁴⁺ _0.5Sb⁵⁺ _0.5S₈, with Sb⁵⁺ substituting for Sn⁴⁺ and forming (SbS₄)^3– tetrahedra as might be expected, given that the metal to sulphur ratio is 1, and given the sphalerite-like structure of the mineral. However Bi³⁺ cannot be so accommodated, resulting in a deficiency in (S + Se) for Kawazu hemusite. Reflectance spectra for both are compared with those of the tungsten analogue (compositional) of hemusite, kiddcreekite. The relationship between hemusitesensu stricto and these newly reported varieties is discussed in terms of simple and coupled chemical substitutions, and inferences are drawn on the valency of Sb, Bi, Mo and Cu in the hemusite structure.

---

Neue chemische und optische Daten für antimon- und bismuthführende Varietäten von Hemusit aus Japan

Zusammenfassung Neue chemische und optische Daten für antimon- und bismuthführende Hemusite auf epithermalen Au-Ag-Cu Lagerstätten in Japan werden vorgelegt. Die empirische Formel für die antimon-führende Varietät aus der Iriki-Mine ist: (Cu_5.83Fe_0.14Ag_0.01)_5.98Mo_1.03(Sn_0.54Sb_0.41Te_0.03Bi_0.02)_1.00 (S_7.85Se_0.15)_8.00, und die der Sb-Bi Varietät aus der Kawazu Mine ist: (Cu_5.84Fe_0.14Ag_0.01)_5.99M0_1.03(Sn_0.82Sb_0.11Bi_0.l0Te_0.04)_1.07 (S_7.80Se_0.12)_7.92. Die theoretische Formel von Hemusit ist Cu⁺ ₄Cu²⁺ ₂Mo⁴⁺Sn⁴⁺S₈, während die wahrscheinlichere Formel für den Hemusit von Iriki Cu⁺ ₄Cu²⁺ _1.5Mo⁴⁺Sn⁴⁺ _0.5Sb⁵⁺ _0.5S₈, mit Sb⁵⁺ an der Stelle von Sn⁴⁺, das(SbS₄)^3– Tetraeder bildet, wie zu erwarten ist, unter der Voraussetzung, da das Metall zu Schwefelverhältnis 1 und die Struktur sphaleritähnlich ist. Bi³⁺ kann jedoch nicht in dieser Weise untergebracht werden, und das führt zu einem Mangel an (S + Se) für den Hemusit von Kawazu. Die Reflektions-Spektren beider Minerale werden mit denen des Wolfram-Equivalents von Hemusit (Kiddcreekit) verglichen. Die Beziehung zwischen Hemusitsensu stricto und diesen jetzt beschriebenen Varietäten wird auf der Basis einfacher und gekoppelter chemischer Substitution diskutiert. Auf dieser Basis werden Schlüsse auf die Valenz von Sb, Bi Mo und Cu in der Hemusit-Struktur gezogen.

     

Magnitude of σ1, σ2, and σ3 at mid-crustal levels in an orogenic belt: Microboudin method applied to an impure metachert from Turkey

We revised an equation for estimating palaeostress magnitude using the microboudin technique by incorporating the influence of time on the fracture strength of minerals. The equation was used to estimate triaxial palaeostresses from a rare sample of metachert from Turkey that contains microboudinaged, columnar tourmaline grains in a wide range of orientations within the foliation plane. The estimated principal palaeostresses are σ₁ = 605 MPa, σ₂ = 598 MPa, and σ₃ = 597 MPa. As the microboudinage is considered to have occurred immediately before the rock encountered the brittle-plastic transition during exhumation, these stress values correspond to conditions at approximately 18 km depth and 300 °C within a Cretaceous orogenic belt.     

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Crystal chemical significance of chemical zoning in dissakisite-(Ce)

Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types. Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F ₀| > 4σF ₀] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal, where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified as autoepitaxy.     

Difference in the prevailing periods of internal tides between Sagami and Suruga Bays: Numerical experiments

Current measurements in the surface layer in Sagami and Suruga Bays showed existence of significant tidal currents which are considered to be mainly due to internal tides (Inaba, 1982; Ohwaki,ea al., 1991). In addition, the prevailing period of the tidal currents is semidiurnal in Sagami Bay, but diurnal in Suruga Bay. To explain this difference in the prevailing, periods, numerical experiments were carried out using a two layer model. The internal tides are generated on the Izu Ridge outside the two bays. The semidiurnal internal tide propagates into Sagami Bay having characteristics of an internal inertia-gravity wave, while it propagates into Suruga Bay having characteristics of either an internal inertia-gravity wave or an internal Kelvin wave. The diurnal internal tide behaves only as an internal Kelvin wave, because the diurnal period is longer than the inertia period. Thus, the diurnal internal tide generated on the Izu Ridge can be propagated into Suruga Bay, while it cannot propagate into the inner region of Sagami Bay, though it is trapped around Oshima Island, which is located at the mouth of Sagami Bay. The difference in the propagation characteristics between the semidiurnal and diurnal internal tides can give a mechanism to explain the difference in the prevailing periods of the internal tides between Sagami and Suruga Bays.     

Influence of Current Width Variation on the Annual Mean Transport of the East Sakhalin Current: A Simple Model

Recent observations suggest that the annual mean southward transport of the East Sakhalin Current (ESC) is significantly larger than the annual mean Sverdrup transport. Motivated by this observational result, transport of a western boundary current has been investigated using a simple numerical model with a western slope. This transport is defined as the instantaneous barotropic transport integrated from the western boundary to the offshore point where the barotropic velocity vanishes. The model, forced by seasonally varying wind stress, exhibits an annual mean of the western boundary current transport that is larger than that of the Sverdrup transport, as observed. The southward transport from October to March in the model nearly equals the instantaneous Sverdrup transport, while the southward transport from April to September decreases slowly. Although the Sverdrup transport in July vanishes, the southward transport in summer nearly maintains the annual mean Sverdrup transport, because the barotropic Rossby wave cannot intrude on the western slope. This summer transport causes the larger annual mean. Although there are some uncertainties in the estimation of the Sverdrup transport in the Sea of Okhotsk, the seasonal variation of the southward transport in the model is qualitatively similar to the observations.     

Evidence for predominance of internal tidal currents in Sagami and Suruga bays

Tidal currents observed in a surface layer overlying deep water in Sagami and Suruga Bays frequently have large amplitude in summer and fall. Numerical experiments show that the current amplitude due to the surface tides is below 1.0 cm sec^–1 for the semidiurnal and diurnal constituents in the inner region of the two bays. The observed current amplitudes are larger than the calculated ones due to the surface tides. Therefore, the observed tidal currents are indicated to be due mainly to the internal tides. In addition, the semidiurnal currents dominate the diurnal currents in Sagami Bay, while the opposite occurs in Suruga Bay. These results suggest that the prevailing periods of the internal tides differ between the two bays,i.e., the internal tide has a semidiurnal period in Sagami Bay and a diurnal period in Suruga Bay.     

Contamination of organotin compounds and imposex in molluscs from Vancouver,Canada

Gastropods and bivalves were collected at 15 sites at Vancouver and Victoria, Canada between 24 May and 7 June, 1999, to establish tissue concentrations of butyltin and phenyltin compounds, to record imposex symptoms in gastropods, and to assess the present status of organotin contamination around Vancouver. No neogastropods (such as Nucella lima) were found around Vancouver. Neogastropod populations could have been extirpated by severe TBT contamination in Vancouver, as relatively high concentrations of TBT were detected in tissues of Mytilus trossulus from Vancouver, and the neogastropods distributed in Vancouver might be sensitive to TBT. Recovery from imposex, however, was observed in neogastropod populations from three sites at Victoria and Mission Point. TBT contamination has continued around Vancouver, arising from continuous use of TBT in antifouling paints for vessels larger than 25 m in length; however, TBT has decreased around Victoria and Mission Point. Different patterns of TBT accumulation in tissue were observed among the bivalve species from Vancouver. The highest TBT concentration detected in Tresus capax suggested some possible adverse effects. TBT was the most predominant butyltin component in almost all bivalve specimens surveyed, suggesting a low rate of TBT metabolism. Phenyltin compounds were not detected in any molluscan specimens in this study.