Local ice caps in Finderup Land,North Greenland,survived the Holocene Thermal Maximum

Local glaciers and ice caps (GICs) comprise only ~5.4% of the total ice volume, but account for ~14–20% of the current ice loss in Greenland. The glacial history of GICs is not well constrained, however, and little is known about how they reacted to Holocene climate changes. Specifically, in North Greenland, there is limited knowledge about past GIC fluctuations and whether they survived the Holocene Thermal Maximum (HTM, ~8 to 5 ka). In this study, we use proglacial lake records to constrain the ice‐marginal fluctuations of three local ice caps in North Greenland including Flade Isblink, the largest ice cap in Greenland. Additionally, we have radiocarbon dated reworked marine molluscs in Little Ice Age (LIA) moraines adjacent to the Flade Isblink, which reveal when the ice cap was smaller than present. We found that outlet glaciers from Flade Isblink retreated inland of their present extent from ~9.4 to 0.2 cal. ka BP. The proglacial lake records, however, demonstrate that the lakes continued to receive glacial meltwater throughout the entire Holocene. This implies that GICs in Finderup Land survived the HTM. Our results are consistent with other observations from North Greenland but differ from locations in southern Greenland where all records show that the local ice caps at low and intermediate elevations disappeared completely during the HTM. We explain the north–south gradient in glacier response as a result of sensitivity to increased temperature and precipitation. While the increased temperatures during the HTM led to a complete melting of GICs in southern Greenland, GICs remained in North Greenland probably because the melting was counterbalanced by increased precipitation due to a reduction in Arctic sea‐ice extent and/or increased poleward moisture transport.     

Morphodynamic assessment of side channel systems using a simple one‐dimensional bifurcation model and a comparison with aerial images

Side channel construction is a common intervention applied to increase a river's conveyance capacity and to increase its ecological value. Past modelling efforts suggest two mechanisms affecting the morphodynamic change of a side channel: (1) a difference in channel slope between the side channel and the main channel and (2) bend flow just upstream of the bifurcation. The objective of this paper was to assess the conditions under which side channels generally aggrade or degrade and to assess the characteristic timescales of the associated morphological change. We use a one‐dimensional bifurcation model to predict the development of side channel systems and the characteristic timescale for a wide range of conditions. We then compare these results to multitemporal aerial images of four side channel systems. We consider the following mechanisms at the bifurcation to be important for side channel development: sediment diversion due to the bifurcation angle, sediment diversion due to the transverse bed slope, partitioning of suspended load, mixed sediment processes such as sorting at the bifurcation, bank erosion, deposition due to vegetation, and floodplain sedimentation. There are limitations to using a one‐dimensional numerical model as it can only account for these mechanisms in a parametrized manner, but the model reproduces general behaviour of the natural side channels until floodplain‐forming processes become important. The main result is a set of stability diagrams with key model parameters that can be used to assess the development of a side channel system and the associated timescale, which will aid in the future design and maintenance of side channel systems. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

On Flare-CME Characteristics from Sun to Earth Combining Remote-Sensing Image Data with <Emphasis Type="Italic">In Situ</Emphasis> Measurements Supported by Modeling

We analyze the well-observed flare and coronal mass ejection (CME) from 1 October 2011 (SOL2011-10-01T09:18) covering the complete chain of effects – from Sun to Earth – to better understand the dynamic evolution of the CME and its embedded magnetic field. We study in detail the solar surface and atmosphere associated with the flare and CME using the Solar Dynamics Observatory (SDO) and ground-based instruments. We also track the CME signature off-limb with combined extreme ultraviolet (EUV) and white-light data from the Solar Terrestrial Relations Observatory (STEREO). By applying the graduated cylindrical shell (GCS) reconstruction method and total mass to stereoscopic STEREO-SOHO (Solar and Heliospheric Observatory) coronagraph data, we track the temporal and spatial evolution of the CME in the interplanetary space and derive its geometry and 3D mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the magnetic cloud (MC) from in situ measurements from Wind. This is compared to nonlinear force-free (NLFF) model results, as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are lower in the interplanetary space by ～?50% and 75%, respectively, possibly indicating an erosion process. A CME mass increase of 10% is observed over a range of \({\sim}\,4\,\mbox{--}\,20~\mathrm{R}_{\odot }\). The temporal evolution of the CME-associated core-dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME.     

Search for extinct aluminum‐26 and titanium‐44 in nanodiamonds from the Allende CV3 and Murchison CM2 meteorites

Abstract– We report Mg‐Al and Ca‐Ti isotopic data for meteoritic nanodiamonds separated from the Allende CV3 and Murchison CM2 meteorites. The goal of this study was to search for excesses in ²⁶Mg and ⁴⁴Ca, which can be attributed to the in situ decay of radioactive and now extinct ²⁶Al and ⁴⁴Ti, respectively. Previous work on presolar SiC and graphite had shown that ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios in presolar grains can be used to discriminate between different types of stellar sources. Aluminum and Ti concentrations are low in the meteoritic nanodiamonds of this study. Murchison nanodiamonds have higher Al and Ti concentrations than the Allende nanodiamonds. This can be attributed to contamination and the presence of presolar SiC in the Murchison nanodiamond samples. ²⁶Mg/²⁴Mg and ⁴⁴Ca/⁴⁰Ca ratios are close to normal in Allende nanodiamonds with upper limits on the initial ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios of approximately 1 × 10^?3. These ratios are factors of 10–1000 and, respectively, 1–1000 lower than those of presolar SiC and graphite grains from supernovae. The ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti data for nanodiamonds are compatible with an asymptotic giant branch star or solar system origin, but not with a supernova origin of a major fraction of meteoritic nanodiamonds. The latter possibility cannot be excluded, though, as the diamond separates may contain significant amounts of contaminating Al and Ti, which would lower the inferred ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios considerably.     

Coronal Holes and Solar Wind High-Speed Streams: II. Forecasting the Geomagnetic Effects

We present a simple method of forecasting the geomagnetic storms caused by high-speed streams (HSSs) in the solar wind. The method is based on the empirical correlation between the coronal hole area/position and the value of the Dst index, which is established in a period of low interplanetary coronal mass ejection (ICME) activity. On average, the highest geomagnetic activity, i.e., the minimum in Dst, occurs four days after a low-latitude coronal hole (CH) crosses the central meridian. The amplitude of the Dst dip is correlated with the CH area and depends on the magnetic polarity of the CH due to the Russell – McPherron effect. The Dst variation may be predicted by employing the expression Dst(t)=(−65±25×cos λ)[A(t ^*)]^0.5, where A(t ^*) is the fractional CH area measured in the central-meridian slice [−10°,10°] of the solar disc, λ is the ecliptic longitude of the Earth, ± stands for positive/negative CH polarity, and t−t ^*=4 days. In periods of low ICME activity, the proposed expression provides forecasting of the amplitude of the HSS-associated Dst dip to an accuracy of ≈30%. However, the time of occurrence of the Dst minimum cannot be predicted to better than ±2 days, and consequently, the overall mean relative difference between the observed and calculated daily values of Dst ranges around 50%.     

Shock deformation confirms the impact origin for the Cerro do Jarau,Rio Grande do Sul,Brazil, structure

Cerro do Jarau is a conspicuous, circular morpho‐structural feature in Rio Grande do Sul State (Brazil), with a central elevated core in the otherwise flat “Pampas” terrain typical for the border regions between Brazil and Uruguay. The structure has a diameter of approximately 13.5 km. It is centered at 30^o12′S and 56^o32′W and was formed on basaltic flows of the Cretaceous Serra Geral Formation, which is part of the Paraná‐Etendeka Large Igneous Province (LIP), and in sandstones of the Botucatu and Guará formations. The structure was first spotted on aerial photographs in the 1960s. Ever since, its origin has been debated, sometimes in terms of an endogenous (igneous) origin, sometimes as the result of an exogenous (meteorite impact) event. In recent years, a number of studies have been conducted in order to investigate its nature and origin. Although the results have indicated a possible impact origin, no conclusive evidence could be produced. The interpretation of an impact origin was mostly based on the morphological characteristics of the structure; geophysical data; as well as the occurrence of different breccia types; extensive deformation/silicification of the rocks within the structure, in particular the sandstones; and also on the widespread occurrence of low‐pressure deformation features, including some planar fractures (PFs). A detailed optical microscopic analysis of samples collected during a number of field campaigns since 2007 resulted in the disclosure of a large number of quartz grains from sandstone and monomict arenite breccia from the central part of the structure with PFs and feather features (FFs), as well as a number of quartz grains exhibiting planar deformation features (PDFs). While most of these latter grains only carry a single set of PDFs, we have observed several with two sets, and one grain with three sets of PDFs. Consequently, we here propose Cerro do Jarau as the seventh confirmed impact structure in Brazil. Cerro do Jarau, together with Vargeão Dome (Santa Catalina state) and Vista Alegre (Paraná State), is one of very few impact structures on Earth formed in basaltic rocks.     

Circulating planning ideas from the metropole to the colonies: understanding South Africa's segregated cities through policy mobilities

In the early part of the twentieth century, South African cities were segregated in accordance with British city planning concepts that embodied the belief that social order can be manipulated through the urban form. This paper surveys the history of South African planning practices to understand the spread of segregation policies and practices. Whereas scholars tend to agree that the apartheid city (post?1948) is a more highly organized and structured version of the colonial city (pre?1910), the literature lacks consensus on the development of the segregated city (1910?1948) within South Africa. How did concepts of segregation circulate and why was it implemented with such consistency? Accordingly, this paper employs concepts of policy mobilities to trace historical configurations in South Africa to international influences. The focus on the circuits of knowledge explains how concepts and designs transplanted from elsewhere helped create the form of South African cities today. Understanding the movement of planning ideas through policy mobilities furthers geographical understandings of historical circulation processes, the role of the local actors, and policy mobilities failure. This history of learning also challenges the assumption that South African cities are unique and in so doing opens the doors for knowledge sharing between postcolonial cities.