Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

Horizontal spatial and temporal distribution patterns of nearshore larval fish assemblages at a temperate rocky shore

There have been no previous studies of the composition of nearshore larval fish assemblages along the coast of Portugal. We aimed to describe the composition and horizontal distribution patterns of larval fish assemblages and their temporal dynamics near a rocky reef at depths shallower than 13 m (inshore) and at two miles (3.70 km) from shore (offshore), as well as along transects perpendicular to the shoreline, from the reef to 10 miles offshore (18.52 km). Samples were taken using 5 min sub-surface trawls at the rocky shore of the Arrábida Marine Park (W Portugal). A total of 1021 larvae were collected, belonging to 61 taxa inshore and to 29 taxa offshore. Along transects, 626 larvae of 52 taxa were collected. Most larvae belonged to coastal species associated with rocky reefs. Total larval abundance and diversity were higher from May to July, which is consistent with the spawning activity of adults. Diversity and total larval abundance decreased significantly with increasing distance from shore, both in the inshore/offshore comparison and in the transects, where this decrease was evident at a very small spatial scale (within the first mile from the reef). Species assemblages differed in the pattern of distribution, with most species clearly associated to the extreme nearshore. The distribution patterns obtained were independent of the spawning mode of species. Results are discussed in the light of the possible physical mechanisms that can potentially act at the Arrábida Marine Park to facilitate larvae retention and the role of larval behaviour.     

Structural evolution of the Bayanhongor region, west-central Mongolia

Most of previous models suggest that the Central Asia Orogenic Belt grew southward in the Phanerozoic. However, in the Bayanhongor region in west-central Mongolia, volcanic arc, accretionary prism, ophiolite, and passive margin complexes accreted northeastward away from the Baydrag micro-continent, and hence the region constitutes the southwestern part of a crustal-scale syntaxis close to the west. The syntaxis should be original, because presumably reorientation due to strike-slip faulting can be ignored. It is reconfirmed that the Baydrag eventually collided with another micro-continent (the Hangai) to the northeast. A thick sedimentary basin developed along the southern passive margin of the Hangai micro-continent. This region is also characterized by an exhumed metamorphosed accretionary complex and a passive margin complex, which are both bounded by detachment faults as well as basal reverse faults which formed simultaneously as extrusion wedges. This part of the Central Asia Orogenic Belt lacks exhumed crystalline rocks as observed in the Himalayas and other major collisional orogenic belts. In addition, we identified two phases of deformation, which occurred at each phase of zonal accretion as D1 through Cambrian and Devonian, and a synchronous phase of final micro-continental collision of Devonian as D2. The pre-collisional ocean was wide enough to be characterized by a mid-ocean ridge and ocean islands. Two different structural trends of D1 and D2 are observed in accretionary complexes formed to the southwest of the late Cambrian mid-ocean ridge. That is, the relative plate motions on both sides of the mid-ocean ridge were different. Accretionary complexes and passive margin sediments to the northeast of the mid-ocean ridge also experienced two periods of deformation but show the same structural trend. Unmetamorphosed cover sediments on the accretionary prism and on the Hangai micro-continent experienced only the D2 event due to micro-continental collision. These unmetamorphosed sediments form the hanging walls of the detachment faults. Moreover, they were at least partly derived from an active volcanic arc formed at the margin of the Baydrag micro-continent.     

Calorimetric study of the coesite-stishovite transformation and calculation of the phase boundary

High temperature drop-solution calorimetry in molten 2 PbO · B₂O₃ at 1044 K for coesite and stishovite polymorphs of silica was carried out to determine the enthalpy of the coesite-stishovite transition. These experiments were performed on high-purity, single-phase samples of coesite and stishovite. Our new value for the enthalpy of the coesitestishovite transition (ΔH ₂₉₈ ⁰ ) is 29.85 ± 0.78 kJ/mol, which is about 35% lower than previously reported by Akaogi and Navrotsky (1984) and Holm et al. (1967), but which compares well with new measurements by Akaogi et al. (1994b). Using these new data, we have calculated the equilibrium phase boundary between coesite and stishovite and obtained a slope, dP/dT=0.0031 (2) GPa/K. This calculated slope is in good agreement with that determined [0.0026 (2) GPa/K] from the in-situ X-ray diffraction study of Zhang et al. (1996).     

Fluid inclusions in granulites, granulitized eclogites and garnet clinopyroxenites from the Dabie–Sulu terranes, eastern China

Minor granulites (believed to be pre-Triassic), surrounded by abundant amphibolite-facies orthogneiss, occur in the same region as the well-documented Triassic high- and ultrahigh-pressure (HP and UHP) eclogites in the Dabie–Sulu terranes, eastern China. Moreover, some eclogites and garnet clinopyroxenites have been metamorphosed at granulite- to amphibolite-facies conditions during exhumation. Granulitized HP eclogites/garnet clinopyroxenites at Huangweihe and Baizhangyan record estimated eclogite-facies metamorphic conditions of 775–805 °C and ≥15 kbar, followed by granulite- to amphibolite-facies overprint of ca. 750–800 °C and 6–11 kbar. The presence of (Na, Ca, Ba, Sr)-feldspars in garnet and omphacite corresponds to amphibolite-facies conditions. Metamorphic mineral assemblages and P–T estimates for felsic granulite at Huangtuling and mafic granulite at Huilanshan indicate peak conditions of 850 °C and 12 kbar for the granulite-facies metamorphism and 700 °C and 6 kbar for amphibolite-facies retrograde metamorphism. Cordierite–orthopyroxene and ferropargasite–plagioclase coronas and symplectites around garnet record a strong, rapid decompression, possibly contemporaneous with the uplift of neighbouring HP/UHP eclogites.

Carbonic fluid (CO₂-rich) inclusions are predominant in both HP granulites and granulitized HP/UHP eclogites/garnet clinopyroxenites. They have low densities, having been reset during decompression. Minor amounts of CH₄ and/or N₂ as well as carbonate are present. In the granulitized HP/UHP eclogites/garnet clinopyroxenites, early fluids are high-salinity brines with minor N₂, whereas low-salinity fluids formed during retrogression. Syn-granulite-facies carbonic fluid inclusions occur either in quartz rods in clinopyroxene (granulitized HP garnet clinopyxeronite) or in quartz blebs in garnet and quartz matrices (UHP eclogite). For HP granulites, a limited number of primary CO₂ and mixed H₂O–CO₂(liquid) inclusions have also been observed in undeformed quartz inclusions within garnet, orthopyroxene, and plagioclase which contain abundant, low-density CO₂±carbonate inclusions. It is suggested that the primary fluid in the HP granulites was high-density CO₂, mixed with a significant quantity of water. The water was consumed by retrograde metamorphic mineral reactions and may also have been responsible for metasomatic reactions (“giant myrmekites”) occurring at quartz–feldspar boundaries. Compared with the UHP eclogites in this region, the granulites were exhumed in the presence of massive, externally derived carbonic fluids and subsequently limited low-salinity aqueous fluids, probably derived from the surrounding gneisses.     

Progress and new directions in high temperature calorimetry revisited

 High temperature reaction calorimetry has seen considerable advances over the past twenty years. New and more sensitive calorimeters, improved sample handling techniques, and better control of the final dissolved state has made solution calorimetry and drop solution calorimetry, using molten lead borate and other solvents, very versatile and reliable techniques. This paper summarizes these advances and presents examples of specific applications to problems of transition metal oxide chemistry, high pressure geophysics, melt and glass energetics, and metastable materials relevant to the earth sciences. Received June 3, 1996 / Revised, accepted Spetember 23, 1996     

U-Th dating of Lake Lisan (late Pleistocene dead sea) aragonite and implications for glacial east Mediterranean climate change

U-series dating can be an effective means to obtain accurate and precise ages on Quaternary carbonates. However, most samples require a correction for U and Th in admixed detritus. This complication is often addressed through generation of U-Th isochrons, requiring analyses of several coeval samples. In addition, presence of water-derived (hydrogenous) Th in the carbonate can cause inaccuracies in isochron ages.This study reports a high-resolution U-series chronology of sediments deposited by Lake Lisan, the last glacial precursor of the Dead Sea. The strategy employed combines multiple measurements from a few stratigraphic heights and fewer analyses from many heights in a single described and measured section. The resulting chronology is based on ages at 22 heights in a ∼40-m-thick section covering the interval of ∼70-14 calendar ka BP. The effects of admixed detritus are evaluated using trace elements. Nearly pure aragonite samples, indicated by very low abundances of insoluble elements such as Nb and Zr, were found to contain hydrogenous Th, which causes the uncorrected U-²³⁰Th age of a modern sample to be ∼2.5 ka. Nevertheless, accurate ages have been obtained by correcting for the detrital and aqueous interferences. The resulting ages are in stratigraphic order, and their accuracy is evidenced by consistency of Lisan Formation U-series and ¹⁴C ages with the coral-based calendar-radiocarbon age calibration.The U-Th ages provide a context to unravel the limnological history of Lake Lisan. Boundaries between the Lower, Middle, and Upper stratigraphic units correspond to the MIS 4/3 and 3/2 transitions, respectively. During MIS 2 and 4 the lake generally showed a stable two-layer configuration and a positive fresh-water balance, reflected by deposition of laminated aragonite-detritus. Dry intervals during MIS 2 and 4 are indicated by thick gypsum layers and an inferred depositional hiatus, which are temporally associated with Heinrich events H1 at ∼17 ka and H6 at ∼65 ka, respectively. During MIS 3 the lake level was unstable with intermittent dry periods indicated by abundant clastic layers and a significant hiatus between ∼43-49 ka. Clastic layers are associated with Dansgaard-Oeschger events during MIS 3, and indicate lake level declines during abrupt Northern Hemisphere warmings. Overall, the climate of the Eastern Mediterranean region shows a strong linkage to the Northern Hemisphere climate, with increasing lake size and stability during cold periods, and fluctuations and dessication during warmings and Heinrich events.     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

Case study on the strategy and application of enhancement solutions to improve remediation of soils contaminated with Cu, Pb and Zn by means of electrodialysis

Numerous studies have been conducted with electrochemical removal of heavy metals from spiked kaolinite. Meanwhile, when moving from kaolinite to real soils, new factors must be taken into account—factors influencing, e.g., the buffering capacity of the soil against acidification and the adsorption/desorption processes of the heavy metals. The present study gives some examples where it is necessary to use an enhancement solution to aid desorption of Cu, Zn and Pb during electrodialytic treatment. Dependent on the composition of the pollution, different choices can be made. In the case of a Cu-polluted calcareous soil, ammonia may be used as enhancement solution, due to the formation of charged complexes between ammonia and Cu. Thus, Cu is mobile at high pH when ammonia is added and Cu can be removed without dissolving the calcareous parts. Zn is also mobilized by ammonia, but to a lesser extent than Cu. In the case of Cu, Zn and Pb at the same time, alkaline ammonium citrate may be a solution. It was shown that this enhancement solution could mobilize these three pollutants, but optimization of concentration and pH of the ammonium citrate is still needed. When choosing a remediation scheme for electrochemical treatment of an actual industrially polluted soil, this scheme must be chosen on basis of characterization of soil and pollution combination.