添加维生素B_（12）生产菌高密度培养褶皱臂尾轮虫的效果

阐述把维生素Ｂ１２生产菌添加到培养水中培养褶皱臂尾轮虫ＢｒａｃｈｉｏｎｕｓＰｌｉｃａｔｉｌｉｓ的买验。共１８株细菌分离于轮虫培养池，其中，有一株产维生素Ｂ１２的假单胞杆菌ＴＰ４对轮虫的生长繁殖有明显的促进作用。把ＴＰ４菌株培养后，加入到２Ｌ的烧杯和５００Ｌ的水槽中培养泰国Ｓ型轮虫时．在９ｄ（天）和６ｄ（天）中，轮虫密度从１２４～１３９和２４２～２８８个体／ｍｌ增殖到４，４１７～５，５４０和１，０１７～１，２５４个体／ｍｌ，分别比对照组增加了４～６及２～３倍。     

The squeezing potential of rock around tunnels: Theory and prediction with examples taken from Japan

Summary Large deformations of surrounding media around tunnels are often encountered during excavations in rocks with squeezing characteristics. These deformations may sometimes continue for a long period of time. Predictions of deformations of tunnels in such grounds are urgently needed, not because of stability concerns, but also of their sevicability. In the present study, the squeezing phenomenon of rock around tunnels and its mechanism and associated factors are first clarified by carefully studying failures of tunnels, and a survey of tunnels in squeezing rocks in Japan is presented and its results are summarised. Then, a practical method is proposed to predic the squeezing potential and deformation of tunnels in squeezing rock and this method has beeen applied to actual tunnelling projects, where squeezing problems were encountered, to check its applicability and validity. Finally, an extension of this method to the time-dependent behaviour of squeezing rocks is given and an application of this method to an actual tunnel is presented.     

Effects of grain morphology on critical state: a computational analysis

We introduce a new DEM scheme (LS-DEM) that takes advantage of level sets to enable the inclusion of real grain shapes into a classical discrete element method. Then, LS-DEM is validated and calibrated with respect to real experimental results. Finally, we exploit part of LS-DEM potentiality by using it to study the dependency of critical state (CS) parameters such as critical state line (CSL) slope \(\lambda \), CSL intercept \(\varGamma \), and CS friction angle \(\varPhi _{\mathrm{CS}}\) on the grain’s morphology, i.e., sphericity, roundness, and regularity. This study is carried out in three steps. First, LS-DEM is used to capture and simulate the shape of five different two-dimensional cross sections of real grains, which have been previously classified according to the aforementioned morphological features. Second, the same LS-DEM simulations are carried out for idealized/simplified grains, which are morphologically equivalent to their real counterparts. Third, the results of real and idealized grains are compared, so the effect of “imperfections” on real particles is isolated. Finally, trends for the CS parameters (CSP) dependency on sphericity, roundness, and regularity are obtained as well as analyzed. The main observations and remarks connecting particle’s morphology, particle’s idealization, and CSP are summarized in a table that is attempted to help in keeping a general picture of the analysis, results, and corresponding implications.     

The squeezing potential of rocks around tunnels; Theory and prediction

Summary The deformational behaviour of tunnels, which underwent large deformations, socalled squeezing, have been recently receiving great attention in the field of rock mechanics and tunnelling. Contrary to rockbursting phenomenon in which the deformation of the medium takes place instantaneously, the deformation of the surrounding rock in squeezing phenomenon takes place slowly and gradually when the resulting stress state following the excavation exceeds the strength of the surrounding medium. Although there are some proposals for the definition of squeezing rocks and prediction of their squeezing potential and deformations of tunnels in literature, it is difficult to say that they are concise and appropriate.In the first half of this paper, the squeezing phenomenon of rock about tunnels and its mechanism and associated factors are clarified by studying carefully observed failures in-situ and laboratory model tests. Then, an extensive survey of tunnels in squeezing rocks in Japan is presented and the results of this survey are summarised. In the second half of the paper, a new method is proposed to predict the squeezing potential and deformations of tunnels in squeezing rock. Then, the method is applied to actual tunnelling projects, where squeezing problems have been encountered, to check its validity and applicability. As a concrete example, an application of the method to predict the squeezing potential and deformations of the rock along a 300 m long section of an actual tunnel was made.     

Fate and transport of pollutants through a municipal solid waste landfill leachate in Sri Lanka

This study focuses on the characterization of leachate generated from Gohagoda dumpsite in Kandy, Sri Lanka, assessment of its spatial and temporal variations, and identification of subsurface canals and perched water bodies in the wetland system affected by the leachate flow. Leachate samples were collected monthly throughout dry and rainy seasons from different points of the leachate drainage channel over a period of 1 year and they were tested for quality parameters: pH, temperature, electrical conductivity, total dissolved soils, alkalinity, hardness, total solids, volatile solids, total suspended solids, volatile suspended solids, biochemical oxygen demand (BOD₅), chemical oxygen demand, nitrate-nitrogen, nitrite-nitrogen, phosphates, ammonium-nitrogen, chloride, dissolved organic carbon, total organic carbon and heavy metals. Sequential soil extraction procedures were performed for the characterization of leachate-affected local soil. A geophysical survey using direct current resistivity technique was conducted at locations downstream of the dumpsite. Leachate characteristics indicated that the leachate is in the methanogenic phase and the results strongly suggest that the leachate may be polluting the river where the leachate is discharged directly. Leachate exceeds the allowable limits of Sri Lankan wastewater discharge standards for many of the parameters. Significant difference (P < 0.05) was observed for most of organic and inorganic parameters among all sampling locations. Many parameters showed a negative correlation with pH. The affected soils showed high heavy metal concentrations. Resistivity study confirmed a confined leachate flow at the near surface with few subsurface canals. However, no separate subsurface plume movement was observed. The results of this research can effectively be used for the establishment of an efficient and effective treatment method for the Gohagoda landfill leachate.     

Melt inclusion analysis of the Unzen 1991–1995 dacite: implications for crystallization processes of dacite magma

Dacitic magma, a mixture of high-temperature (T) aphyric magma and low-T crystal-rich magma, was erupted during the 1991–1995 Mount Unzen eruptive cycle. Here, the crystallization processes of the low-T magma were examined on the basis of melt inclusion analysis and phase relationships. Variation in water content of the melt inclusions (5.1–7.2 wt% H₂O) reflected the degassing history of the low-T magma ascending from deeper levels (250 MPa) to a shallow magma chamber (140 MPa). The ascent rate of the low-T magma decreased markedly towards the emplacement level as crystal content increased. Cooling of magma as well as degassing-induced undercooling drove crystallization. With the decreasing ascent rate, degassing-induced undercooling decreased in importance, and cooling became more instrumental in crystallization, causing local and rapid crystallization along the margin of the magma body. Some crystals contain scores of melt inclusions, whereas there are some crystals without any inclusions. This heterogeneous distribution suggests the variation in the crystallization rate within the magma body; it also suggests that cooling was dominant cause for melt entrapment. Numerical calculations of the cooling magma body suggest that cooling caused rapid crystal growth and enhanced melt entrapment once the magma became a crystal-rich mush with evolved interstitial melt. The rhyolitic composition of melt inclusions is consistent with this model.Editorial responsibility: H Shinohara     

Observation of hydrogen peroxide concentrations in a Japanese red pine forest

In order to study the concentrations of hydrogen peroxide (H₂O₂) and the factors controlling its concentrations, we monitored concentrations of H₂O₂ and other gases such as sulfur dioxide, ozone, and NO _x as well as meteorological factors such as air temperature, relative humidity, and wind direction/speed during eight measurement periods from 2000 to 2002 in a Japanese red pine forest in Japan. The H₂O₂ concentrations ranged from below 0.01 to 1.64 ppb, and analysis of the diurnal variation in H₂O₂ concentration showed high concentrations around noon, and low concentrations in the morning and late afternoon. The H₂O₂ concentrations were high in early summer, when O₃ concentration, temperature, and solar radiation were high, and were low in fall, when O₃ concentration, temperature, and solar radiation were low. We propose that O₃ concentration affects the production of H₂O₂ in the monitored region during the period under study, but that high H₂O₂ concentrations were sometimes caused by the transport of polluted air from urban regions. H₂O₂ concentrations decreased remarkably when SO₂ concentrations increased by transported volcanic emission on Miyake Island. In the absence of the effects of SO₂, H₂O₂ concentrations increased with increasing O₃ concentration and temperature.     

Concentrations of metallic elements in long-range-transported aerosols measured simultaneously at three coastal sites in China and Japan

To determine the effects of long-range transport of aerosols from an upwind area in East Asia to a downwind area in Japan, we chemically analyzed aerosols collected simultaneously on Tuoji Island (Shandong Province, China), Fukue Island (Nagasaki Prefecture, Japan), and Cape Hedo (Okinawa Prefecture, Japan). We focused on changes in the metallic composition of PM_2.5 aerosols during long-range transport. The average mass concentrations of PM_2.5 at the three sites decreased in the order Tuoji Island > Fukue Island ≈ Cape Hedo (48.3 ± 4.5, 13.9 ± 1.5, and 13.2 ± 0.9 μg/m³, respectively). The fraction of coarse particles in total suspended particles estimated by (1–PM_2.5/TSP) was highest on Cape Hedo, indicating that the contribution of sea salts was increased by long-range transport of the aerosols over the ocean. Enrichment factor analysis revealed that at all three sites, Al, K, Ca, Mn, Fe, Co, Sr, and Ba originated from soil; whereas Cr, Ni, Cu, Zn, As, Mo, Ag, Cd, Sn, Sb, Tl, and P appeared to be of anthropogenic origin. Na was the most abundant element on Cape Hedo, indicating the addition of sea salts during aerosol transport. The V concentration was highest at Fukue Island, which was ascribed to V emission from ships. Sixty-one percent of the V on Fukue Island and 62% of the V on Cape Hedo were determined to have originated from ships, implicating of data obtained on dates during which backward trajectory analysis indicated that the same air mass passed over Tuoji Island, Fukue Island, and Cape Hedo in that order.     

New technologies and systems for high quality citrus fruit production,labor-saving and orchard construction in mountain areas of Japan

Novel technologies have been necessary for improving fruit quality and productivity of citrus,labor-saving and orchard conservation on steep slope lands since aging of growers and decrease in the number of successors is remarkable in mountain areas of southwestern Japan. The purpose of this paper is to introduce new technologies for improving citrus production that have been developed in recent years. A new fruit quality control system using drip irrigation and liquid fertilization technique combined with year-round plastic mulching was developed, and it enables high quality and stable citrus fruit production. Water and/or nutrient solution is automatically supplied through drip tubes that are laid under the mulching sheets to give adequate water stress, so as to improve sugar and acid content of fruit. A new transportation system for steep sloping citrus orchards, which is a combination of the monorail system and contour narrow paths, was suggested. A small walking cultivator was developed to explain the procedure of narrow path excavation. After introducing the narrow path, working hours for fertilizer and chemicalherbicide application were reduced. Disasterpr evention mapping of citrus orchards on slope landswas developed based on computer-aided seepage estimation and topographic data. The mapping can show zones of both ascending flow and descendingflow of underground water during heavy rains incitrus orchards. The mapping is considered to be effective for the management of orchards andprevention of erosion on slope lands.