The host galaxies of active galactic nuclei

We examine the properties of the host galaxies of 22 623 narrow-line active galactic nuclei (AGN) with  0.02 < z < 0.3  selected from a complete sample of 122 808 galaxies from the Sloan Digital Sky Survey. We focus on the luminosity of the [O  iii ]λ5007 emission line as a tracer of the strength of activity in the nucleus. We study how AGN host properties compare with those of normal galaxies and how they depend on L [O  iii ]. We find that AGN of all luminosities reside almost exclusively in massive galaxies and have distributions of sizes, stellar surface mass densities and concentrations that are similar to those of ordinary early-type galaxies in our sample. The host galaxies of low-luminosity AGN have stellar populations similar to normal early types. The hosts of high-luminosity AGN have much younger mean stellar ages. The young stars are not preferentially located near the nucleus of the galaxy, but are spread out over scales of at least several kiloparsecs. A significant fraction of high-luminosity AGN have strong Hδ absorption-line equivalent widths, indicating that they experienced a burst of star formation in the recent past. We have also examined the stellar populations of the host galaxies of a sample of broad-line AGN. We conclude that there is no significant difference in stellar content between type 2 Seyfert hosts and quasars (QSOs) with the same [O  iii ] luminosity and redshift. This establishes that a young stellar population is a general property of AGN with high [O  iii ] luminosities.     

Mercury speciation in surface and deep waters of the Mediterranean Sea

Mercury speciation and its distribution in surface and deep waters of the Mediterranean Sea were studied during two oceanographic cruises on board the Italian research vessel URANIA in summer 2003 and spring 2004 as part of the Med Oceaneor and MERCYMS projects. The study included deep water profiles of dissolved gaseous Hg (DGM), reactive Hg (RHg), total Hg (THg), monomethyl Hg (MeHg) and dimethyl Hg (DMeHg) in open ocean waters. Average concentrations of measured Hg species were characterized by seasonal and spatial variations. Overall average THg concentrations ranged between 0.41 and 2.65 pM (1.32 ± 0.48 pM) and were comparable to those obtained in previous studies of the Mediterranean Sea. A significant fraction of Hg was present as “reactive” Hg (average 0.33 ± 0.32 pM). Dissolved gaseous Hg (DGM), which consists mainly of Hg⁰, represents a considerable proportion of THg (average 20%, 0.23 ± 0.11 pM). The portion of DGM typically increased towards the bottom, especially in areas with strong tectonic activity (Alboran Sea, Strait of Sicily, Tyrrhenian Sea), indicating its geotectonic origin. No dimethyl Hg was found in surface waters down to the depth of 40 m. Below this depth, its average concentration was 2.67 ± 2.9 fM. Dissolved fractions of total Hg and MeHg were measured in filtered water samples and were 0.68 ± 0.43 pM and 0.29 ± 0.17 pM for THg and MeHg respectively. The fraction of Hg as MeHg was in average 43%, which is relatively high compared to other ocean environments. The concentrations reported in this study are among the lowest found in marine environments and the quality of analytical methods are of key importance. Speciation of Hg in sea water is of crucial importance as THg concentrations alone do not give adequate data for understanding Hg sources and cycling in marine environments. For example, photoinduced transformations are important for the presence of reactive and elemental mercury in the surface layers, biologically mediated reactions are important for the production/degradation of MeHg and DGM in the photic zones of the water column, and the data for DGM in deep sea indicate the natural sources of Hg in geotectonicaly active areas of the Mediterranean Sea.     

Tunneling and interference of Alfvén waves

The propagation and interference of Alfvén waves in magnetic regions is studied. A multilayer approximation of the standard models of the solar atmosphere is used. In each layer, there is a linear law of temperature variation and a power law of Alfvén velocity variation. The analytical solutions of a wave equation are stitched at the layer boundaries. The low-frequency Alfvén waves (P > 1 s) are able to transfer the energy from sunspots into the corona by tunneling only. The chromosphere is not a resonance filter for the Alfvén waves. The interference and resonance of Alfvén waves are found to be important to wave propagation through the magnetic coronal arches. The transmission coefficient of Alfvén waves into the corona increases sharply on the resonance frequences. To take into account the wave absorption in the corona, a method of equivalent schemes is developed. The heating of a coronal arch by Alfvén waves is discussed.     

3rd Regional Symposium on Landslides in the Adriatic-Balkan Region (3rd ReSyLAB)—a final report

The 3rd Regional Symposium on Landslides in the Adriatic-Balkan Region (3rd ReSyLAB) was held in Ljubljana, Slovenia, from June 11 to 13, 2017, with 70 participants from nine countries (Austria, Bosnia and Hercegovina, Croatia, Czech Republic, Italy, Republic of Macedonia, Serbia, Slovenia, Spain)—scientists, engineers, researchers, students, experts, politicians, and other decision-makers working in the area of landslide risk reduction in the region. The ReSyLAB is a biannual event organized by the Adriatic-Balkan Network of the International Consortium on Landslides (ICL ABN). Being an important form of activities of this ICL regional network comprising of six ICL members from four countries, it was also a contribution of the International Consortium on Landslides (ICL) to the implementation of the Sendai Framework for Disaster Risk Reduction 2015–2030. This article reports on the main outcomes of the 3rd ReSyLAB Symposium. Altogether, 41 abstracts were published in the symposium book of abstracts, and the symposium proceedings with over 20 reviewed full papers are under preparation to be printed early in 2018. During the 3rd ReSyLAB, a five invited keynote lectures have been presented, and 28 oral presentations are given to the audience. An important part of the symposium was a Round Table entitled “Enhancing cooperation between landslide research community and end users.” On the last day of the symposium, over 30 experts participated in two post-symposium study tours in Slovenia.     

A review of marine mammal,sea turtle and seabird bycatch in USA fisheries and the role of policy in shaping management

This paper reviews the available information (observer programs, estimates, statutes, regulations) for bycatch of marine mammals, sea turtles, and seabirds in fisheries of the United States. Goals of the review were to evaluate the state of knowledge of bycatch and the role of existing protective legislation in shaping bycatch management for different taxa. Pressing issues are identified, as well as knowledge gaps and policy limitations that hinder multi-species bycatch reduction. The USA has made important progress toward reducing bycatch in its fisheries, but the efficacy of its management has been limited somewhat by a focus on taxon- and fishery-specific regulation and the lack of consistent mandate across taxa for taking a cumulative perspective on bycatch. Applying consistent criteria across taxa for setting bycatch limits (e.g., extending the approach used for marine mammals to sea turtles and seabirds) would be the first step in a multi-species approach to bycatch reduction. A population-based multi-species multi-gear approach to bycatch would help identify priority areas where resources are needed most and can be used most effectively.     

Implications for behavior of volatile elements during impacts—Zinc and copper systematics in sediments from the Ries impact structure and central European tektites

Moldavites are tektites genetically related to the Ries impact structure, located in Central Europe, but the source materials and the processes related to the chemical fractionation of moldavites are not fully constrained. To further understand moldavite genesis, the Cu and Zn abundances and isotope compositions were measured in a suite of tektites from four different substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia) and chemically diverse sediments from the surroundings of the Ries impact structure. Moldavites are slightly depleted in Zn (~10–20%) and distinctly depleted in Cu (>90%) relative to supposed sedimentary precursors. Moreover, the moldavites show a wide range in δ⁶⁶Zn values between 1.7 and 3.7‰ (relative to JMC 3‐0749 Lyon) and δ⁶⁵Cu values between 1.6 and 12.5‰ (relative to NIST SRM 976) and are thus enriched in heavy isotopes relative to their possible parent sedimentary sources (δ⁶⁶Zn = ?0.07 to +0.64‰; δ⁶⁵Cu = ?0.4 to +0.7‰). In particular, the Cheb Basin moldavites show some of the highest δ⁶⁵Cu values (up to 12.5‰) ever observed in natural samples. The relative magnitude of isotope fractionation for Cu and Zn seen here is opposite to oxygen‐poor environments such as the Moon where Zn is significantly more isotopically fractionated than Cu. One possibility is that monovalent Cu diffuses faster than divalent Zn in the reduced melt and diffusion will not affect the extent of Zn isotope fractionation. These observations imply that the capability of forming a redox environment may aid in volatilizing some elements, accompanied by isotope fractionation, during the impact process. The greater extent of elemental depletion, coupled with isotope fractionation of more refractory Cu relative to Zn, may also hinge on the presence of carbonyl species of transition metals and electromagnetic charge, which could exist in the impact‐induced high‐velocity jet of vapor and melts.     

The global structural response model for multi-deck ships in concept design phase

This paper is an attempt to contribute to the improvement of an analysis model within overall structural synthesis procedure for the multi-deck ships. The paper is organized in two parts: modeling principles and model validation. Principles of the proposed generic model formulation on the global and sub-structure levels are given in detail while the load model is briefly summarized. The basic building blocks (macro-elements and gross-elements) for the modeling of ordinary stiffened panels, combining numerical and analytical approaches, are presented and discussed w.r.t. requirements for a multi-deck structure. Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height. The generic ship models developed using outlined principles and the basic building blocks are further validated through complex examples of a large cruise ship and a livestock carrier. On the global level, the accuracy of the generic model w.r.t. the longitudinal stress distribution over ships height is compared with a standard full ship FE model. The results confirmed that the suggested structural modeling principles, based on the generic FE model can be applied for the fast investigation of different structural topological/geometrical concepts as well as for the ordinary scantling/material optimization.