A new tectonic scenario for the Sanandaj–Sirjan Zone (Iran)

Recent geochemical studies of volcanic rocks forming part of the ophiolites within the Zagros and Naien-Baft orogen indicate that most of them were developed as supra-subduction ophiolites in intra-oceanic island arc environments. Intra-oceanic island arcs and ophiolites now forming the Naien-Baft zone were emplaced southwestward onto the northeastern margin of the South Sanandaj–Sirjan Zone, while those now in the High Zagros were emplaced southwestward onto the northern margin of Arabia. Thereafter, subduction continued on opposite sides of the remnant oceans. The floor of Neo-Tethys Ocean was subducted at a low angle beneath the entire Sanandaj–Sirjan Zone, and the floor of the Naien-Baft Ocean was subducted beneath the Central Iranian Micro-continent. The Naien-Baft Ocean extended into North-West Iran only temporarily. This failed ocean arm (between the Urumieh-Dokhtar Magmatic Assemblage and the main Zagros Thrust) was filled by thick Upper Triassic–Upper Jurassic sediments. The Naien-Baft Ocean finally closed in the Paleocene and Neo-Tethys closed in the Early to Middle Eocene. After Arabia was sutured to Iran, the Urumieh-Dokhtar Magmatic Assemblage recorded slab break-off in the Middle Eocene.     

Kinetic and equilibrium study of Ni(II) sorption from aqueous solutions onto Peganum harmala-L

In this study, the adsorption behavior of Ni(II) in an aqueous solution system using natural adsorbent Peganum harmala-L was measured via batch mode. The prepared sorbent was characterized by scanning electron microscope, Fourier transform infrared spectroscopy, N₂ adsorption–desorption and pH_zpc. Adsorption experiments were carried out by varying several conditions such as contact time, metal ion concentration and pH to assess kinetic and equilibrium parameters. The equilibrium data were analyzed based on the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms. Kinetic data were analyzed using the pseudo-first-order, pseudo-second-order and intra-particular diffusion models. Experimental data showed that at contact time 60 min, metal ion concentration 50 mg/L and pH 6, a maximum amount of Ni(II) ions can be removed. The experimental data were best described by the Langmuir isotherm model as is evident from the high R ² value of 0.988. The adsorption capacity (q _m) obtained was 68.02 mg/g at an initial pH of 6 and a temperature of 25 °C. Kinetic studies of the adsorption showed that equilibrium was reached within 60 min of contact and the adsorption process followed the pseudo-first-order model. The obtained results show that P. harmala-L can be used as an effective and a natural low-cost adsorbent for the removal of Ni(II) from aqueous solutions.     

Decolorization of different azo dyes by Phanerochaete chrysosporium RP78 under optimal condition

Detoxification of synthetic dyes is one of the main challenges in clearing textile industry wastes. Biodegradation of azo-dyes using Phanerochaete chrysosporium is one the most environmentally friendly methods available. The main enzymes responsible for mycodecolorization process are lignin and manganese peroxidases. Here, optimization of expression conditions has been carried out with manipulating culture condition and nutrient sources. Therefore, the effects of buffer and temperature as well as nitrogen source on lignin peroxidase and manganese peroxidase production were investigated at two levels and four levels, respectively. For this purpose, P. chrysosporium RP78 based on Taguchi design of experiment has been applied. Maximum lignin and manganese peroxidase activities of 182 ± 2.5 U/L and 850 ± 41 U/L were obtained under predicted optimum conditions, respectively. Thereby, about 100 % decolorization was achieved after 24 h for two most widely used groups of azo dyes in textile industry consisting reactive and acidic. The physical adsorption of the azo dyes by mycelia was not significant which indicated that the enzymatic degradation of the dyes was occurred. Time profile of these enzymes showed that manganese peroxidase was peaked on 9^th day while lignin peroxidase peaked on 13^th day and remained stable in the culture. The extracellular expression profiles of both were studied by 2 dimensional gel electrophoresis to partially characterize the enzymes.     

Flood frequency analysis based on simulated peak discharges

Flood frequency approaches vary from statistical methods, directly applied on the observed annual maximum flood series, to adopting rainfall–runoff simulation models that transform design rainfalls to flood discharges. Reliance on statistical flood frequency analysis depends on several factors such as the selected probability distribution function, estimation of the function parameters, possible outliers, and length of the observed flood series. Through adopting the simulation approach in this paper, watershed-average rainfalls of various occurrence probabilities were transformed into the corresponding peak discharges using a calibrated hydrological model. A Monte Carlo scheme was employed to consider the uncertainties involved in rainfall spatial patterns and antecedent soil moisture condition (AMC). For any given rainfall depth, realizations of rainfall spatial distribution and AMC conditions were entered as inputs to the model. Then, floods of different return periods were simulated by transforming rainfall to runoff. The approach was applied to Tangrah watershed in northeastern Iran. It was deduced that the spatial rainfall distribution and the AMCs exerted a varying influence on the peak discharge of different return periods. Comparing the results of the simulation approach with those of the statistical frequency analysis revealed that, for a given return period, flood quantiles based on the observed series were greater than the corresponding simulated discharges. It is also worthy to note that existence of outliers and the selection of the statistical distribution function has a major effect in increasing the differences between the results of the two approaches.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Evaluation of the effect of river style framework on water quality: application of geomorphological factors

The Tarwal River basin with an area of 6560.20 km² is located in the eastern part of Iranian Kurdistan Province. This river crosses the Qorveh and Dehgolan plains and joins the Ghezel Ozan River in Zanjan Province. The importance of this river as a source for drinking water and agricultural and industrial uses in the region necessitates the need for research in this field. The main purpose of this study is to identify the natural features of the riverbed from the perspective of river geomorphology and to investigate their impact on water quality and river self-purification capacity. To achieve this, the river style framework was employed. To investigate the effects of each style framework on the river, a total of 20 samples from the entrance and outlet of styles were obtained using Impact Assessment method and sampling standards which were later analyzed for their quality parameters including T, pH, EC, TDS, TSS, Na, Ca, Mg, K, Cl, F, NO₂, NO₃, SO₄, PO₄, DO, COD and BOD. The results indicated that the changes in the styles lead to changes in water quality and the impact of each style is greater on the physical parameters than the chemical parameters. The river self-purification capacity varied depending on the style. The maximum and the minimum self-purifications occurred in fine-grained Anabranching and low-sinuosity fine-grained styles, respectively.     

The influence of the Arctic Oscillation on winter temperatures in Iran

Summary The impact of the Arctic Oscillation (AO) on the winter surface air temperature (SAT) over Iran is demonstrated. Winter SAT data for 50 years (1951–2000) are analyzed for the negative and the positive AO phases. Using the Median Sequential Correlation Analysis (MSCA) technique it is shown that the winter SAT is negatively correlated to the winter AO index for most parts of Iran. The winter AO index accounts for about 14% to 46% of the winter SAT variance. The positive (negative) SAT anomaly is found to be associated with the onset of the negative (positive) phase. The overall probability of below long-term mean temperature during the positive and the negative phases are estimated to be around 70% and 25%, respectively. For the negative phase, westerly winds that originate from the warm Atlantic regions increase over Iran and consequently positive temperature anomalies are found across the country. The positive AO phase is accompanied by northerly winds that allow continental polar and arctic air masses to move into Iran, producing below normal temperatures. The summer AO is found to explain about 25–32% of the winter SAT variance in Iran. The reason for this is explained by the significant correlation (+0.38) between the summer and the following winter AO indices. These results indicate that the summer climate is linked to changes in atmospheric circulation which persist through to the following autumn and winter.     

Valuation of socio-economic indicators for progressing urban sustainability under distinctive rubrics

The key objective of the study is to collect the factors which play an important role in the city's sustainability and implementation advantages for the development of cities in future. This article develops an urban sustainability assessment framework by giving GIS-based decision support tools to guide cities toward sustainability. Multicriteria analysis was used as the decision support system and provides an analytical framework for assessing differences in the level of criteria and ranking decision options. It has the capability for assessment of urban sustainability because it brings sustainability criteria from three pillars of sustainability, environmental, social, and economic, which provide an integrated approach for assessment of urban sustainability. The GIS-based multicriteria analysis serves as a sustainability support system that maps urban sustainability and the underlying environmental, social, and economic conditions. The results from the study show that the four cities - Faisalabad, Lahore, Gujranwala, and Multan - have better economic conditions while only Lahore and Faisalabad showed social progress and the remaining cities showed less suitability. For the environmental index, none of the cities attained high suitability. Lahore, Faisalabad, and Rawalpindi showed better conditions than Gujranwala and Multan. It is demonstrated that Punjab cities have made progress in economic condition and improvement in social condition but have poor environmental condition. In the study, the environmental dimension has indicators which have more impact on the urban sustainability. Environmental degradation is observed in all selected regions and not a single region showed suitability toward its environmental condition and due to this none of the cities gained suitable scores for urban sustainability. Consequently, urban sustainability is a multidimensional and dynamic process that needs regular evaluation and monitoring. Thus, this article contends that the tools help to highlight and emphasize those areas that need guidance in achieving urban sustainability.