Development and installation of bedload monitoring systems with submerged load cells

Bedload governs riverbed channel variations and morphology, it is necessary to determine bedload discharge through an arbitrary cross section in a mountain river. A new system with submerged load cells has been developed to directly measure bedload discharge. The system consists of: (1) an iron box which is 1 m long, 0.5 m wide and 0.1 m in depth, (2) two submerged load cells 0.7 m apart, (3) a pressure sensor and, (4) an electromagnetic velocity meter. This system has been designed to exclude the effect of the hydraulic pressure of water on direct measurements of bedload particle weight. Initial tests in a laboratory were conducted to examine the accuracy of measurements with the system under aerial conditions. The system has been installed in the supercritical flume in Ashi-arai-dani River of the Hodaka Sedimentation Observatory of the Disaster Prevention Research Institute (DPRI) of Kyoto University to obtain bedload discharge under natural conditions. Flume tests were conducted in this channel by artificial supply of uniform sediment particles of several grain sizes. The average velocity of the sediment particles near the bed was estimated using cross-correlation functions for weight waves obtained by the two load cells. Bedload discharge calculations were based on time integration of the product of sediment velocity and sediment weight obtained by the two load cells. This study clarifies the reasons why bedload measurements are difficult, and provides some solutions using the monitoring systems with submerged load cells through the field measurements. Additionally, the applicability of bedload measurement with the submerged load cells is explained based on experimental artificial sediment supply data.     

Penetration into low-density media: In situ observation of penetration process of various projectiles

In order to understand the penetration process of projectiles into lower-density targets, we carry out hypervelocity impact experiments using low-density (60 mg cm^?3) aerogel targets and various types of projectiles, and observe the track formation process in the targets using a high-speed camera. A carrot shaped track, a bulbous, and a “hybrid” one consisting of bulbous and thin parts, are formed. The results of the high-speed camera observations reveal the similarity and differences on the temporal evolution of the penetration depth and maximum diameter of these tracks. At very early stages of an impact, independent of projectile type, the temporal penetration depth is described by hydrodynamic models for the original projectiles. Afterward, when the breakup of projectiles does not occur, intact projectiles continue to penetrate the aerogels. In the case of the breakup of projectiles, the track expands with a velocity of about a sound velocity of the aerogel at final stages. If there are large fragments, they penetrate deeper and the tracks become a hybrid type. The penetration of the large fragments is described by hydrodynamic models. Based on these results, we discuss the excavation near the impact point by shock waves.     

Investigation of local time dependence of Mercury's sodium exosphere based on a numerical simulation

Mercury has a surface-bounded exosphere (SBE) similar to that of the Moon. One of the atmospheric species, sodium, was found by ground-based observations to be the most prominent component. Mercury's sodium SBE is known to be non-uniform with respect to local time (LT) in low-latitude regions: the sodium column density in the dawn-side region is larger than that in the dusk-side region, and the sodium abundance is the largest in the morning-noon region. To reveal the production processes for the exosphere near Mercury's surface, the LT dependence of the exosphere was investigated through a numerical simulation. Three data sets of sodium column densities observed for the dawn-side hemisphere, observed by Sprague et al. [1997. Distribution and abundance of sodium in Mercury's atmosphere, 1985-1988. Icarus 12, 506-527], were compared with results simulated by a 3D Monte Carlo method, and the source rates and density of sodium of the planetary surface were estimated. In the simulation, the photon-stimulated desorption (PSD) and thermal desorption (TD) processes were assumed as the release mechanisms. The sodium source rates for the three data sets, at respective heliocentric distances of about 0.33, 0.42, and 0.44 AU, were estimated as 1-4×10⁸ Na/cm²/s with weak LT dependence. In contrast, the expected sodium surface density showed clear dependence on LT and the heliocentric distance. The sodium surface density decreases from early morning to noon by a few orders, and, particularly for large heliocentric distances, the surface is in a condition of sodium excess and depletion with respect to the surface sodium density assumed by Killen et al. [2004. Source rates and ion recycling rates for Na and K in Mercury's atmosphere. Icarus 171, 1-19] in the early morning and morning-noon regions, respectively. This study implies that the decrease in sodium surface density from the early morning to noon regions might produce the characteristic LT dependence in the low-latitude dawn-side region.     

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.     

Organic micropollutants in marine plastics debris from the open ocean and remote and urban beaches

To understand the spatial variation in concentrations and compositions of organic micropollutants in marine plastic debris and their sources, we analyzed plastic fragments (∼10 mm) from the open ocean and from remote and urban beaches. Polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), dichloro-diphenyl-trichloroethane and its metabolites (DDTs), polybrominated diphenyl ethers (PBDEs), alkylphenols and bisphenol A were detected in the fragments at concentrations from 1 to 10,000 ng/g. Concentrations showed large piece-to-piece variability. Hydrophobic organic compounds such as PCBs and PAHs were sorbed from seawater to the plastic fragments. PCBs are most probably derived from legacy pollution. PAHs showed a petrogenic signature, suggesting the sorption of PAHs from oil slicks. Nonylphenol, bisphenol A, and PBDEs came mainly from additives and were detected at high concentrations in some fragments both from remote and urban beaches and the open ocean.     

Physical and chemical effects of ingested plastic debris on short-tailed shearwaters, Puffinus tenuirostris, in the North Pacific Ocean

We investigated the plastics ingested by short-tailed shearwaters, Puffinus tenuirostris, that were accidentally caught during experimental fishing in the North Pacific Ocean in 2003 and 2005. The mean mass of plastics found in the stomach was 0.23 g per bird (n = 99). Plastic mass did not correlate with body weight. Total PCB (sum of 24 congeners) concentrations in the abdominal adipose tissue of 12 birds ranged from 45 to 529 ng/g-lipid. Although total PCBs or higher-chlorinated congeners, the mass of ingested plastic correlated positively with concentrations of lower-chlorinated congeners. The effects of toxic chemicals present in plastic debris on bird physiology should be investigated.     

内蒙古商都地区CO2气藏地质条件研究

本文以商都盆地第三系CO2气成藏条件研究为目的，通过对区域构造（断裂、火山活动、岩浆作用）和地层特征及沉积相研究，结合地震勘探成果、CO2碳同位素、氦同位素分析成果，系统探讨了商都盆地CO2气源、运移通道、储集条件、圈闭及盖层条件，并对CO2气成藏模式进行了分析。认为：该区CO2气为幔源成因气，通过包兰哈达－高勿素深断裂运移到第三系储集层中富集成藏。第三系河流或冲积扇沉积的粗碎屑岩广泛分布，而且厚度较大，成岩程度低，具有良好的储集条件。新第三纪晚期的湖泛沉积，形成了巨厚的泥页岩盖层。沉积期后的差异压实作用、断裂、火山及岩浆活动等多因素作用，使这一地区局部构造发育，形成岩性－构造圈闭或构造性圈闭，有利于CO2气成藏。     

Perturbed physics ensemble using the MIROC5 coupled atmosphere–ocean GCM without flux corrections: experimental design and results

In this study, we constructed a perturbed physics ensemble (PPE) for the MIROC5 coupled atmosphere–ocean general circulation model (CGCM) to investigate the parametric uncertainty of climate sensitivity (CS). Previous studies of PPEs have mainly used the atmosphere-slab ocean models. A few PPE studies using a CGCM applied flux corrections, because perturbations in parameters can lead to large radiation imbalances at the top of the atmosphere and climate drifts. We developed a method to prevent climate drifts in PPE experiments using the MIROC5 CGCM without flux corrections. We simultaneously swept 10 parameters in atmosphere and surface schemes. The range of CS (estimated from our 35 ensemble members) was not wide (2.2–3.2?°C). The shortwave cloud feedback related to changes in middle-level cloud albedo dominated the variations in the total feedback. We found three performance metrics for the present climate simulations of middle-level cloud albedo, precipitation, and ENSO amplitude that systematically relate to the variations in shortwave cloud feedback in this PPE.     

宁芜地区玢岩铁矿Pb同位素研究

本文对宁芜地区铁矿床中磷灰石和矿石进行了Pb同位素测定。磷灰石的208Pb-232Th等时线年龄为124Ma,与辉长闪长(玢)岩和钠长石岩的形成年龄均相吻合,为成矿时代与成岩时代相近提供了佐证。岩体长石Pb同位素显示,宁芜地区中生代火成岩的原始岩浆受到了大陆壳深部3.3Ga的古老岩系的混染。矿床中矿石铅主要来自赋矿母岩浆。成矿流体具有异常高的Th/U值,表明Th相对U的明显富集,这可能反映了流体中卤素为主要的矿物质迁移载体。