Building Web-Based Spatial Information Solutions around Open Specifications and Open Source Software

Geographic Information Systems (GIS) are moving from isolated, standalone, monolithic, proprietary systems working in a client‐server architecture to smaller web‐based applications and components offering specific geo‐processing functionality and transparently exchanging data among them. Interoperability is at the core of this new web services model. Compliance with Open Specifications (OS) enables interoperability. Web‐GIS software's high costs, complexity and special requirements have prevented many organizations from deploying their data and geo‐processing capabilities over the World Wide Web. There are no‐cost Open Source Software (OSS) alternatives to proprietary software for operating systems, web servers, and Relational Database Management Systems. We tested the potential of the combined use of OS and OSS to create web‐based spatial information solutions. We present in detail the steps taken in creating a prototype system to support land use planning in Mexico with web‐based geo‐processing capabilities currently not present in commercial web‐GIS products. We show that the process is straightforward and accessible to a broad audience of geographic information scientists and developers. We conclude that OS and OSS allow the development of web‐based spatial information solutions that are low‐cost, simple to implement, compatible with existing information technology infrastructure, and have the potential of interoperating with other systems and applications in the future.     

The Air-Coastal Sea Chemical Exchange: A Case Study on the New Jersey Coast

The coastal marine atmosphere adjacent to large urban and industrial centers is in general strongly impacted by pollution emissions, resulting in high loading of pollutants in the ambient air. Among the airborne substances are certain trace elements from a variety of emission sources that can serve as micronutrients to marine organisms in coastal waters. High concentrations of such elements in coastal air can result in enhanced air-to-sea deposition fluxes to coastal waters. They could also be transported over the open ocean, affecting the composition of the remote marine atmosphere and then ocean ecosystems. To provide better understanding of the extent of air-to-sea deposition processes on the New Jersey coast, a heavily polluted coastal region on the US East Coast, a synthesis of observation data was carried out for selected trace elements, including Fe, Cd, Cr and Cu, derived from measurements of both size-segregated and bulk aerosol particles, as well as precipitation around the New Jersey coast. The atmospheric input of Hg was also estimated based on measurement data. Results indicated that the total deposition fluxes of most trace elements were higher in Northern coastal NJ compared to Southern coastal NJ, reflecting the differences in the source strengths of these element emissions between the two coastal regions. Dry deposition processes were more significant for common dust-derived elements, particularly Fe and Al, compared with their wet deposition fluxes. However, the processes of precipitation scavenging appeared to be more important for the elements that were often enriched in fine particles including Zn, Cu, Pb and Ni. The removal of Hg from the ambient air was overwhelmingly dominated by atmospheric wet deposition. In the future, atmospheric measurements at more sites on the NJ coast should be performed simultaneously to reduce the spatial and temporal uncertainties associated with atmospheric deposition fluxes estimated in this study.     

Long-term monitoring of the behavior of a talus-colluvium deposit

Landslides - This article describes the behavior of a talus-colluvium deposit up to 70-m thick located in the Serra dos Orgaos, Rio de Janeiro/RJ, Brazil. The monitoring dataset of 13 years...     

Would different methodologies for assessing carbon leakage exposure lead to different risk levels? A case study of the Brazilian industry

Energy-intensive industries play an important role in low-carbon development, being particularly exposed to climate policies. Concern over possible carbon leakage in this sector poses a major challenge for designing effective carbon pricing instruments (CPI). Different methodologies for assessing carbon leakage exposure are currently used by different jurisdictions, each of them based on different approaches and indicators. This paper aims to analyse the extent to which the use of different methodologies leads to different results in terms of exposure to the risk of carbon leakage, using the Brazilian industry sector as a case study. Results indicate that carbon leakage exposure is an expected outcome of eventual CPI implementation in Brazilian industry. However, results vary according to the chosen methodology, so the definition of the criteria is paramount for assessing sectoral exposure to the risk of carbon leakage.

Key policy insights

• Despite increasing discussion about the implementation of carbon pricing on the Brazilian industrial sector, the evaluation of carbon leakage risks is still neglected.

• Assessments of the risk of carbon leakage are directly related to the indicators and criteria used by each methodology. Thus, a given subsector may present different levels of exposure to carbon leakage depending on the methodological choice.

• More than a purely technical discussion, the methodological definition of carbon leakage risk is a political discussion – it can be well-conducted, leading to the success of a CPI, or even sabotaged, by implicitly subsidizing energy-intensive industries.

     

Biochemical alterations in juvenile carp (Cyprinus carpio) exposed to zinc: glutathione reductase as a target

The aim of this study was to investigate biochemical changes in juvenile carp (Cyprinus carpio) exposed to zinc chloride (10, 30 and 100 microM) for a period of 48 h. Zinc exposure caused a concentration-dependent reduction in glutathione reductase (GR) activity in gills, liver and brain. Gill glutathione S-transferase (GST) was reduced when animals were exposed to the highest concentration of 100 microM zinc. The phosphorylation of p38(MAPK) increased in the brain of fish exposed to zinc 100 microM, while phosphorylation of the extracellular signal-regulated protein kinase 1/2 (ERK1/2) and c-Jun N-terminal protein kinase 1/2 (JNK1/2) remained unchanged. Expression of proteins HSP60 and HSP70 were not affected by zinc exposure. Considering the significant concentration-dependent inhibition of GR in all tissues analyzed, this enzyme could be a potential biomarker of exposure to zinc, which has to be confirmed.     

Arsenic attenuation in tailings at a former Cu–W–As mine,SW Finland

Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As₂O₅) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kaňkite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit.     

Web-GIS tool for the management of rural land markets

Land abandonment and stagnation of rural markets in the last few years have become one of the main concerns of rural administrations. The use of Web and GIS (Geographic Information System) technologies can help to mitigate the effects of these problems. This paper pro-poses a novel Web-GIS tool with spatial capabilities for the dynamization of rural land markets by encouraging the transfer of land from owners to farmers through the leasing of plots. The system, based on open source software, offers information about the properties, their environment and their owners. It uses standards for handling the geographic information and for communicating with external data sources. This system was used as the basis for the development of SITEGAL, the tool for the management of the Land Bank of Galicia (www.bantegal.com/sitegal). SITEGAL has been operational since 2007 obtaining benefits for both administration and users (farmers and land owners), and promoting the e-Government.     

Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

Decompression reactions and P–T conditions in high-pressure granulites from Casares-Los Reales units of the Betic-Rif belt (S Spain and N Morocco)

High-pressure granulites are exposed in the Casares-Los Reales group (internal zones of Betic-Rif belt, S Spain–N Morocco) as part of the crustal envelope of Beni Bousera-Ronda Peridotites. They are mostly metapelitic but include intercalations of mafic composition. The metamorphic history is marked by the preservation of early high-pressure assemblages together with secondary low-pressure assemblages suggesting a state of textural and compositional disequilibrium. The P–T path constrained by geothermobarometry and reaction textures from mafic and pelitic lithotypes passes from 800 °C/15 kbar to 600 °C/5 kbar, to indicating a strong decompression related to cooling, followed by a near-isobaric cooling 430 °C and 4 kbar. Such P–T evolution of granulites is thought to reflect some sort of rapid tectonic collapse of crust previously thickened through collision.