Potential of the VLTI for linking stellar frames to ICRF

The question of positioning the optical counterparts of the ICRF quasars is outlined in the perspective of future space astrometry missions, which ultimately will bring a new realization of the ICRS in the optical range. Ground-based interferometry with a dual-field observing mode (PRIMA/VLTI),together with the missions DIVA and FAME, will have a key role in building an extragalactic reference frame in the optical/near-IR range with about the same accuracy as that of the present (VLBI) primary frame. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studying Resource-Dependent Communities Through a Social-Ecological Lens? Examining Complementarity with Existing Research Traditions in Canada

This article explores the suitability of Ostrom and colleagues' social-ecological systems framework (SESF) for the study of resource-dependent communities in Canada. Through a broad literature about resource-dependent communities in Canada, three main approaches are identified, named staples research, rural development, and sustainability studies. Each of these research traditions is analyzed with regards to a common set of criteria – focus, scale, methods, treatment of institutions, and treatment of environmental dimensions. Research in each category is compared and contrasted with the SESF approach, to identify areas of overlap and divergence. Results indicate that the SESF is unlikely to provide additional benefit in terms of in-depth of social analysis, however, it does provide a unique contribution in terms of its coupled approach to conceiving social and ecological systems and its ability to operationalize these relationships through structured variables.     

Recognizing soft-sediment structures in deformed rocks of orogens

Soft-sediment deformation structures are common on passive continental margins, in trenches at subduction zones, and in strike-slip environments. Rocks from all these tectonic environments are incorporated into orogens, where soft-sediment deformation structures should be common. However, recognizing soft-sediment structures is difficult where superimposed tectonic structures are present. In seeking characteristic features of soft-sediment deformation, it is important to separate questions that relate to physical state (lithified or unlithified) from those that address the overall kinematic style (rooted or gravity driven). One recognizable physical state is liquefaction, which produces sand that has much lower strength than interbedded mud. Hence structures which indicate that mud was stronger than adjacent sand at the time of deformation can be used as indicators of soft-sediment deformation. These include angular fragments of mud surrounded by sand, dykes of sand cutting mud, and most usefully, folded sandstone layers displaying class 3 geometry interbedded with mud layers that show class 1 geometry. All these geometries have the potential to survive overprinting by later superimposed tectonic deformation; when preserved in deformed sedimentary rocks at low metamorphic grade they are indicators of liquefaction of unlithified sediment during deformation.     

Past connections and present similarities in slave ownership and fossil fuel usage

The first part of the paper demonstrates the connection between the abolition of slavery and the Industrial Revolution: steam power changed the perception of labour; new techniques facilitated diffusion of pro-abolition pamphlets; fewer threats to basic existence resulting from industrial advances fostered sensibilities and moral standards toward abolitionism; and, through industrial development, the North grasped victory in the American Civil War. The second part presents similarities between societies in the past that have used slave labour and those in the present that use fossil fuels. It argues that slaves and fossil-fuelled machines play(ed) similar economic and social roles: both slave societies and developed countries externalise(d) labour and both slaves and modern machines free(d) their owners from daily chores. Consequently, we are as dependent on fossil fuels as slave societies were dependent on bonded labour. It also suggests that, in differing ways, suffering resulting (directly) from slavery and (indirectly) from the excessive burning of fossil fuels are now morally comparable. When we emit carbon dioxide at a rate that exceeds what the ecosystem can absorb, when we deplete non-renewable resources, we indirectly cause suffering to other human beings. Similarly, cheap oil facilitates imports of goods from countries with little social protection and hence help externalise oppression. The conclusion draws on the lessons which may be learned by Climate Change campaigners from the campaigns to abolish slavery: environmental apathy can be opposed effectively if we learn from what worked in the fight against this inhuman institution.     

Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

The significance of transparent exopolymeric particles in the vertical distribution of bacteria and heterotrophic nanoflagellates in Lake Pavin

The abundance, size distribution, and bacterial colonization of Transparent Exopolymeric Particles (TEP) were examined in two consecutive years during the spring diatom development throughout the water column of the deep meromictic Lake Pavin, France. TEP concentrations ranged from 1.9 to 13.4 × 10⁵ particles l⁻¹ and their distribution and size spectra indicated that these particles are the main factor in governing the transport of diatoms to the deep hypolimnion of the lake. The majority of TEP was colonized by bacteria that constituted 0.4–8.9% of total DAPI-stained bacteria. The intensity of bacterial colonization was strongly related to temperature and decreased with particle size. A more important colonization of small particles in the hypolimnion during thermal stratification suggested that bacterial colonisation also increased with the age of the particle. The abundance of heterotrophic nanoflagellates (HNF) was more significantly related to the density of particles than to the density of total bacteria and the intensity of bacterial colonization of TEP. Our results therefore suggest that TEP are a more important factor for HNF development than attached and free bacteria. We conclude that TEP are involved not only in sedimentation processes but also in the dynamics of bacteria and protozoa in freshwater pelagic environments.     

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

We describe the time discretization of a three-dimensional baroclinic finite element model for the hydrostatic Boussinesq equations based upon a discontinuous Galerkin finite element method. On one hand, the time marching algorithm is based on an efficient mode splitting. To ensure compatibility between the barotropic and baroclinic modes in the splitting algorithm, we introduce Lagrange multipliers in the discrete formulation. On the other hand, the use of implicit–explicit Runge–Kutta methods enables us to treat stiff linear operators implicitly, while the rest of the nonlinear dynamics is treated explicitly. By way of illustration, the time evolution of the flow over a tall isolated seamount on the sphere is simulated. The seamount height is 90% of the mean sea depth. Vortex shedding and Taylor caps are observed. The simulation compares well with results published by other authors.     

Simplified vibratory characterization of alluvial basins

For the analysis of seismic wave amplification, modal methods are interesting tools to study the modal properties of geological structures. Modal approaches mainly lead to information on such parameters as fundamental frequencies and eigenmodes of alluvial basins. For a specific alluvial deposit in Nice (France), a simplified modal approach involving the Rayleigh method is considered. This approach assumes a set of admissible shape functions for the eigenmodes and allows a fast estimation of the fundamental frequency of the basin. The agreement with other numerical results (Boundary Element Method) and experimental ones is fully satisfactory. The simplified modal method then appears as an efficient mean for the global vibratory characterization of geological structures towards resonance. To cite this article: J.-F. Semblat et al., C. R. Geoscience 335 (2003).     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).