Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Validation of a time-domain strip method to calculate the motions and loads on a fast monohull

The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.

The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks.     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

HP–LT Variscan metamorphism in the Cubito-Moura schists (Ossa-Morena Zone, southern Iberia)

Multi-equilibrium thermobarometry shows that low-grade metapelites (Cubito-Moura schists) from the Ossa–Morena Zone underwent HP–LT metamorphism from 340–370 °C at 1.0–0.9 GPa to 400–450 °C at 0.8–0.7 GPa. These HP–LT equilibriums were reached by parageneses including white K mica, chlorite and chloritoid, which define the earliest schistosity (S₁) in these rocks. The main foliation in the schists is a crenulation cleavage (S₂), which developed during decompression from 0.8–0.7 to 0.4–0.3 GPa at increasing temperatures from 400–450 °C to 440–465 °C. Fe³⁺ in chlorite decreased greatly during prograde metamorphism from molar fractions of 0.4 determined in syn-S₁ chlorites down to 0.1 in syn-S₂ chlorites. These new data add to previous findings of eclogites in the Moura schists indicating that a pile of allochtonous rocks situated next to the Beja-Acebuches oceanic amphibolites underwent HP–LT metamorphism during the Variscan orogeny. To cite this article: G. Booth-Rea et al., C. R. Geoscience 338 (2006).     

Crossover from Nonlinearity Controlled to Heterogeneity Controlled Mixing in Two-Phase Porous Media Flows

We use high resolution Monte Carlo simulations to study the dispersive mixing in two-phase, immiscible, porous media flow that results from the interaction of the nonlinearities in the flow equations with geologic heterogeneity. Our numerical experiments show that distinct dispersive regimes occur depending on the relative strength of nonlinearity and heterogeneity. In particular, for a given degree of multiscale heterogeneity, controlled by the Hurst exponent which characterizes the underlying stochastic model for the heterogeneity, linear and nonlinear flows are essentially identical in their degree of dispersion, if the heterogeneity is strong enough. As the heterogeneity weakens, the dispersion rates cross over from those of linear heterogeneous flows to those typical of nonlinear homogeneous flows.     

Bismuth‐melt trails trapped in cassiterite–quartz veins

Native bismuth in the form of metallic melt has been considered instrumental to the formation of some metallic ore deposits via a mechanism dubbed the “Liquid Bismuth Collector Model.” Here, we provide petrographical documentation of trail‐forming, μm‐sized blebs of native bismuth in cassiterite–quartz veins from the Santa Bárbara greisen Sn deposit in the Rondônia tin province of northern Brazil. These inclusions suggest the trapping of a Bi melt that took place during vein formation, in a mechanism similar to the entrapment of fluid inclusions.     

Investigation of the change in soil fabric during cone penetration in silt using 2D measurements

Interpretation of CPTU testing in silt is non-trivial because of the partially drained conditions that are likely to occur during penetration. A better understanding of the pore pressure generation/dissipation is needed in order to obtain reliable design parameters. Following a previous study using X-ray computed tomography (micro-CT) with volumetric digital image correlation (3D-DIC) that clearly showed the formation of distinct dilation and compression areas around the cone; the present work takes a closer look at those areas in order to link volumetric behavior to changes in soil fabric. High-resolution 2D backscattered electron images of polished thin sections prepared from frozen samples at the end of penetration are used. The images have a spatial resolution of 0.4 µm/pixel that allow a clear identification of grains and pore spaces. Image processing techniques are developed to quantify local porosity and obtain the statistical distribution of the particle orientation for the zones around the cone tip and shaft. It is shown that the formation of compaction regions is related to the ability of the grains to rearrange and align along a well-defined preferred orientation forming a more closed-fabric characterized by high anisotropy values, while zones of dilation are associated with a more open packing with grains randomly oriented and with large voids within. These observations suggested that for a saturated soil, water will move from a compressive zone to a neighboring dilative zone, creating a short drainage path. By shedding light on the link between soil fabric and drainage patterns, this study contributes toward a better understanding of the measured macro-response during CPTU tests on silt.     

Social and environmental vulnerability in Southeast Brazil associated with the South Atlantic Convergence Zone

Natural Hazards - A landslide is a geomorphological hazard with significant ecological and economic damages. The present study aimed to identify landslide-prone areas in Farizi watershed via the...