Sources and hydrothermal alteration of organic matter in Quaternary sediments: A synthesis of studies from the Central Gulf of California

Deep sea drilling in the Central Gulf of California, a young and active spreading centre, shows that the high heat flow typical of these regions causes extensive alteration of sediment organic matter, especially near sills and above magma chambers where hydrothermal activity is concentrated. Even on the nearby passive margin, where there are no sills, heat flow is moderately high and hydrocarbon generation has begun in immature sequences. Migrating light hydrocarbons are detected especially where hydrothermal activity is concentrated. Thermogenic methane is more widespread, though not in the passive margin bordering the spreading centre. Despite the incidence of hydrocarbon generation and migration, the amounts of hydrocarbons involved are relatively small and apparently do not lead to commercially significant accumulations of petroleum.The organic matter in these sediments is mostly marine because the Gulf of California generally has low runoff from land and highly productive surface waters. Turbidites rich in terrigenous organic material are locally abundant in the mainly pelagic section in the Guaymas Basin. The highest concentrations of organic matter are found in laminated diatomites deposited on the Guaymas passive margin within the oxygen minimum zone.     

Seasonal Changes in Nitrogen, Free Amino Acids, and C/N Ratio in Mediterranean Seagrasses

Abstract. Seasonal changes in nitrogen, free amino acids, and carbon were investigated in the three Mediterranean seagrasses Posidonia oceanica, Cymodocea nodosa , and Zostera noltii. Leaves, rhizomes, roots, as well as dead plant material were analysed separately. Highest N-concentrations were obtained in the winter months, regardless of species or plant part. In contrast to the other two species, the N-content in Posidonia was higher in the rhizomes than in the leaves.
In the investigated species, marked differences in the free amino acid (FAA) composition were detected between species: Proline, lacking in Posidonia , was the main component in Cymodocea. In Posidonia , FAA decreased from 320umol g^-1 (dry wt) in leaf sheaths to 1.5 umol g^-1 (dry wt) in the leaf tips. The function of proline as a possible storage and/or stress metabolite is discussed.
High C/N values in dead P. oceanica and C. nodosa rhizomes as well as in P. oceanica wrack seem to be related to considerable resistance to decomposition. Low C/N ratios did not increase in detached C. nodosa and Z. noltii leaves, which began to decompose shortly after detachment from the plants.     

Modeling groundwater quality in an agriculturally used water catchment

The sulfate pollution in an agriculturally used watershed has been investigated with respect to the transport in the saturated zone and the development of sulfate in the unsaturated zone. Besides of other sources such as acid wet and dry deposition or sulfate input by agricultural activities, most of the sulfate originates from oxidation of pyrite by either NO₃ or O₂. High sulfate concentrations coincided with high nitrate leaching caused by plowing of former grassland or by vegetable crop residues and with former wet lands that have become dry. By using soil water concentration data and maps showing the extension of former wetlands and grassland as well as agricultural land use, it was possible to delineate regions of high sulfate input. The transport of sulfate in the aquifer was analyzed with a modified version of the USGS MOC model, which takes into account the nonlinearity of the underlying equation describing unconfined groundwater flow. The calibration of the transport model showed good agreement between the estimated and modeled sulfate input rates. A prediction of future sulfate concentrations in the aquifer was feasible by using worst-case parameters.     

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.     

TRANSALP—deep crustal Vibroseis and explosive seismic profiling in the Eastern Alps

The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.     

Origin of the northern Indus Fan and Murray Ridge, Northern Arabian Sea: interpretation from seismic and magnetic imaging

The nature and origin of the sediments and crust of the Murray Ridge System and northern Indus Fan are discussed. The uppermost unit consists of Middle Miocene to recent channel–levee complexes typical of submarine fans. This unit is underlain by a second unit composed of hemipelagic to pelagic sediments deposited during the drift phase after the break-up of India–Seychelles–Africa. A predrift sequence of assumed Mesozoic age occurring only as observed above basement ridges is composed of highly consolidated rocks. Different types of the acoustic basement were detected, which reflection seismic pattern, magnetic anomalies and gravity field modeling indicate to be of continental character. The continental crust is extremely thinned in the northern Indus Fan, lacking a typical block-faulted structure. The Indian continent–ocean transition is marked on single MCS profiles by sequences of seaward-dipping reflectors (SDR). In the northwestern Arabian Sea, the Indian plate margin is characterized by several phases of volcanism and deformation revealed from interpretation of multichannel seismic profiles and magnetic anomalies. From this study, thinned continental crust spreads between the northern Murray Ridge System and India underneath the northern Indus Fan.     

Cathodoluminescence of authigenic albite

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).     

Elemental and isotopic fractionation of Type B calcium-, aluminum-rich inclusions: experiments, theoretical considerations, and constraints on their thermal evolution

Experiments exposing Type B calcium-, aluminum-rich inclusion (CAI)-like melts at high temperatures to high vacuum or reducing hydrogen-rich gas mixtures were used to determine the rates and consequences of elemental and isotopic fractionation by evaporation. Silicon and magnesium were found to evaporate much faster than calcium and aluminum, and the resulting residual liquid trajectories in composition space are reproduced via a thermodynamic model for the saturation vapor pressure of the evaporating species. Isotopic fractionations associated with evaporation were measured for magnesium. The resulting relationship between fraction of magnesium lost and enrichment of the residue in the heavy isotopes of magnesium follows a Rayleigh fractionation curve with a fractionation factor that is close to, but not exactly, the theoretically expected value. The rate of evaporation is found to be a strong function of temperature, oxygen fugacity, and melt composition, which can be understood and modeled in terms of the dependence of the saturation vapor pressures on these variables. The relationship between evaporation rate, which we measure, and calculated saturation vapor involves empirical evaporation coefficients that we find to be significantly less than one (∼0.1). Analytical and numerical models are used to characterize how diffusion in both the melt and in the surrounding gas affects evaporation rates and the degree of chemical and isotopic fractionation. The experimental data and theoretical considerations are combined to give a parameterization of the rates and consequences of evaporation of Type B CAI-like liquids, which is then used to translate the measured isotopic fractionation of Type B CAIs into constraints on their thermal history. Cooling rates of the order of 10°C per hour are indicated.