A time series analysis of sound propagation in a strongly multipathshallow water environment with an adiabatic normal mode approach

Measured time series were generated by small omnidirectional explosive sources in a shallow water area. A bottom-mounted hydrophone recorded sound signals that propagated over a sloping bottom. The time series in the 250-500 Hz band were analyzed with a broad-band adiabatic normal mode approach. The measured waveforms contain numerous bottom interacting multipaths that are complicated by the subbottom structure that contains high-velocity layers near the water-sediment interface. Several of the details of the geoacoustic structure and the depth of the water column at the receiver are inferred from comparisons of the measured data to simulated time series. The sensitivity of broad-band matched-field ambiguity surfaces in the range-depth plane for a single receiver to selected waveguide parameters is examined. A consistent analysis is made where the simulated time series are compared to the measured time series along with the single-receiver matched-field localization solutions for ranges out to 5 km. In this range interval, it was found that the peak cross-correlation between the measured and simulated time series varied between 0.84 and 0.69. The difference between the GPS range and the range obtained from the matched-field solution varied from 0 to 63 m. The geoacoustic structure obtained in the analysis consists of an 8-m low-velocity sediment layer over an 8-m high-velocity layer followed by a higher velocity, infinite half-space     

Geology of the Victor Kimberlite, Attawapiskat, Northern Ontario, Canada: cross-cutting and nested craters

The pipe shapes, infill and emplacement processes of the Attawapiskat kimberlites, including Victor, contrast with most of the southern African kimberlite pipes. The Attawapiskat kimberlite pipes are formed by an overall two-stage process of (1) pipe excavation without the development of a diatreme (sensu stricto) and (2) subsequent pipe infilling. The Victor kimberlite comprises two adjacent but separate pipes, Victor South and Victor North. The pipes are infilled with two contrasting textural types of kimberlite: pyroclastic and hypabyssal-like kimberlite. Victor South and much of Victor North are composed of pyroclastic spinel carbonate kimberlites, the main features of which are similar: clast-supported, discrete macrocrystal and phenocrystal olivine grains, pyroclastic juvenile lapilli, mantle-derived xenocrysts and minor country rock xenoliths are set in serpentine and carbonate matrices. These partly bedded, juvenile lapilli-bearing olivine tuffs appear to have been formed by subaerial fire-fountaining airfall processes.

The Victor South pipe has a simple bowl-like shape that flares from just below the basal sandstone of the sediments that overlie the basement. The sandstone is a known aquifer, suggesting that the crater excavation process was possibly phreatomagmatic. In contrast, the pipe shape and internal geology of Victor North are more complex. The northwestern part of the pipe is dominated by dark competent rocks, which resemble fresh hypabyssal kimberlite, but have unusual textures and are closely associated with pyroclastic juvenile lapilli tuffs and country rock breccias±volcaniclastic kimberlite. Current evidence suggests that the hypabyssal-like kimberlite is, in fact, not intrusive and that the northwestern part of Victor North represents an early-formed crater infilled with contrasting extrusive kimberlites and associated breccias. The remaining, main part of Victor North consists of two macroscopically similar, but petrographically distinct, pyroclastic kimberlites that have contrasting macrodiamond sample grades. The juvenile lapilli of each pyroclastic kimberlite can be distinguished only microscopically. The nature and relative modal proportion of primary olivine phenocrysts in the juvenile lapilli are different, indicating that they derive from different magma pulses, or phases of kimberlite, and thus represent separate eruptions. The initial excavation of a crater cross-cutting the earlier northwestern crater was followed by emplacement of phase (i), a low-grade olivine phenocryst-rich pyroclastic kimberlite, and the subsequent eruption of phase (ii), a high-grade olivine phenocryst-poor pyroclastic kimberlite, as two separate vents nested within the original phase (i) crater. The second eruption was accompanied by the formation of an intermediate mixed zone with moderate grade. Thus, the final pyroclastic pipe infill of the main part of the Victor North pipe appears to consist of at least three geological/macrodiamond grade zones.

In conclusion, the Victor kimberlite was formed by several eruptive events resulting in adjacent and cross-cutting craters that were infilled with either pyroclastic kimberlite or hypabyssal-like kimberlite, which is now interpreted to be of probable extrusive origin. Within the pyroclastic kimberlites of Victor North, there are two nested vents, a feature seldom documented in kimberlites elsewhere. This study highlights the meaningful role of kimberlite petrography in the evaluation of diamond deposits and provides further insight into kimberlite emplacement and volcanism.     

Landscape response to tipping points in granite weathering: The case of stepped topography in the Southern Sierra Critical Zone Observatory

The dynamics of granitic landscapes are modulated by bimodal weathering, which produces patchy granular soils and expanses of bare rock ranging from meter-scale boulders to mountain-scale domes. We used terrain analysis and with cosmogenic nuclide measurements of erosion rates to quantitatively explore Wahrhaftig’s decades-old hypothesis for the development of “stepped topography” by differential weathering of bare and soil-mantled granite. According to Wahrhaftig’s hypothesis, bare granite weathers slower than soil-mantled granite; thus random erosional exposure of bare rock leads to an alternating sequence of steep, slowly weathering bedrock “steps” and gently sloped, but rapidly weathering, soil-mantled “treads.” Our investigation focused on the terrain surrounding the Southern Sierra Critical Zone Observatory (CZO), which is underlain by granitic bedrock and lies outside the limits of recent glaciation, in the heart of the stepped topography described by Wahrhaftig. Our digital terrain analysis confirms that steep steps often grade into gentle treads, consistent with Wahrhaftig’s hypothesis. However, we observe a mix-and-match of soil and bare rock on treads and steps, contrary to one of the hypothesis’ major underpinnings – that bare rock should be much more common on steps than on treads. Moreover, the data show that bare rock is not as common as expected at step tops; Wahrhaftig’s hypothesis dictates that step tops should act as slowly eroding base levels for the treads above them. The data indicate that, within each landscape class (i.e., the steps and treads), bare rock erodes more slowly than surrounding soil. This suggests that the coupling between soil production and denudation in granitic landscapes harbors a tipping point wherein erosion rates decrease when soils are stripped to bedrock. Although broadly consistent with the differential weathering invoked by Wahrhaftig, the data also show that steps are eroding faster than treads, undermining Wahrhaftig’s explanation for the origins of the steps. The revised interpretation proposed here is that the landscape evolves by back-wearing of steps in addition to differential erosion due to differences in weathering of bare and soil-mantled granite.     

A land-use-based modelling chain to assess the impacts of Natural Water Retention Measures on Europe’s Green Infrastructure

This article details the process of integrating models to answer a specific policy-driven question: ‘What could be the impact of proposed Natural Water Retention Measures (NWRMs) on Europe’s Green Infrastructure (GI)?’ It describes the new Land Use Modelling Platform (LUMP), now enabling a high spatial scale (100-m) and large coverage (pan-European), whereby several sector-specific models contribute to assessing the impact of regional-level policy on a given spatial topic of concern. The configuration (land claims and land allocations modules) and calibration (accessibility and biophysical suitability) of the LUMP are explained. Four NWRM scenarios (riparian areas, afforestation, grassland and baseline scenario) are configured to run the simulations. For the reference: year 2006, the spatial representation of GI is based on land-use features of a refined version of the CORINE Land Cover (CLC), and resumed as connected components made of nodes and links.

Mathematical morphological image processing and network graph theory model, available from the free software package GUIDOS (the Joint Research Center of the European Commission), enabled the measurement of the GI connectivity and identified most critical links. Results show that the competition for land claimed by different economic sectors, combined with policy-driven rule-sets for the implementation of different NWRMs, yields very different results for the 2030 land-use projections, and subsequently for the morphology of GI. Three indicators associated with the morphology of GI are computed in order to assess the model outputs for 2030. The indicators are computed to answer the following questions: (1) How is the quantity of GI affected by each of the NWRM, and what proportion of that GI is most valuable? (2) What is the location of the most critical nodes and connectors of GI, and what land-use conversions occur under these? (3) Are the average components getting larger or smaller?

Whereas the grassland measure results in the largest net increase of GI, the afforestation measure results in the overall largest number of hectares of key nodes and links within the network. Land conversions occur under the critical GI nodes and links, with a large increase in agricultural areas, especially for the riparian measure under critical nodes and the grassland measure under critical links. Also predominant is the swapping of land from pasture to forest under critical links with the afforestation measure. The riparian measure most increases the average size of GI components, and all three measures contribute to bridging two large components which were divided in the 2006 land-use map, thus increasing the size of the largest component by more than 50%.     

Chemical characterization of fine particulate matter during peak PM10 episodes in Apulia (South Italy)

Some peak PM10 episodes, occurred during PM monitoring campaigns performed on October 2005 and February and June 2006 in Bari town, have been characterized. Moreover back trajectories of air masses and Principal Component Analyses were applied. Three of the peak PM10 episodes investigated were related to local emissions of primary pollutants during poor atmospheric dispersion conditions. The other two peak PM10 episodes considered are related with long range transport air masses toward Apulia region: in one case the chemical characterization and the back trajectories analysis indicate that high PM10 value detected is due to the Saharan dust advection in the Apulia region; in the other case air masses with different origin give rise to high PM10 value.Moreover PM10 daily mean concentrations, presented in this paper collected from January 2005 to August 2007 and obtained by automatic device in six stations of air quality monitoring networks in Bari territory, do not show a seasonal trend for PM10 concentrations, contrary to the PM10 trend shown in the towns of North Italy. This can be explained mostly considering that our region presents generally meteo-climatic conditions that favour pollutants dispersion.     

Long-term variations in thermal comfort in Vienna

Summary A human energy balance model is calculated using the homogeneous data set of Vienna, Austria (48°N and 16° E). Variations in the different stages of comfort since 1873 are discussed. The historical data are then used to generate scenarios of a changing climate and calculate the impact of these variations on thermal comfort.With 5 Figures     

Warming the early earth—CO2 reconsidered

Despite a fainter Sun, the surface of the early Earth was mostly ice-free. Proposed solutions to this so-called “faint young Sun problem” have usually involved higher amounts of greenhouse gases than present in the modern-day atmosphere. However, geological evidence seemed to indicate that the atmospheric CO₂ concentrations during the Archaean and Proterozoic were far too low to keep the surface from freezing. With a radiative-convective model including new, updated thermal absorption coefficients, we found that the amount of CO₂ necessary to obtain 273 K at the surface is reduced up to an order of magnitude compared to previous studies. For the late Archaean and early Proterozoic period of the Earth, we calculate that CO₂ partial pressures of only about 2.9 mb are required to keep its surface from freezing which is compatible with the amount inferred from sediment studies. This conclusion was not significantly changed when we varied model parameters such as relative humidity or surface albedo, obtaining CO₂ partial pressures for the late Archaean between 1.5 and 5.5 mb. Thus, the contradiction between sediment data and model results disappears for the late Archaean and early proterozoic.