A finite element model of interaction between viscous free surface waves and submerged cylinders

This paper describes the simulation of the flow of a viscous incompressible Newtonian liquid with a free surface. The Navier–Stokes equations are formulated using a streamline upwind Petrov–Galerkin scheme, and solved on a Q-tree-based finite element mesh that adapts to the moving free surface of the liquid. Special attention is given to fitting the mesh correctly to the free surface and solid wall boundaries. Fully non-linear free surface boundary conditions are implemented. Test cases include sloshing free surface motions in a rectangular tank and progressive waves over submerged cylinders.     

Contributions to atmospheric methane by natural seepages on the U.K. continental shelf [Mar. Geol. 137 (1997) 165–189]

Natural gas seepages occur on the United Kingdom's continental shelf and although published reports suggest that they are very rare, the petroleum industry has identified, but not publicly reported, many more. There is also very little data on the flux of gas from seabed seepages, and even less on the contribution of seepages to atmospheric concentrations of gases such as methane.

Potential gas source rocks include Quaternary and Tertiary peats as well as petroliferous source rocks such as the Carboniferous Coal Measures and the Upper Jurassic Kimmeridge Clays. There are also other organic-rich sediments which are potential source rocks. Together these cover a considerable part of the U.K. continental shelf.

Analogue seismic reflection (pinger) profiles acquired during the British Geological Survey's regional mapping programme have been reviewed to identify water column targets including fish and plumes of gas bubbles. The ability to distinguish targets is critical to an assessment of the distribution of gas seepages. Both theoretical predictions of target identity and the habits of shoaling fish have been investigated in order to identify a method of distinction.

Data from seabed seepages and measurements of seepage rates have been used to establish likely ranges of gas flux rates and the sizes of gas bubbles. The likelihood that a rising bubble will survive and escape into the atmosphere is determined primarily by bubble size and water depth; methane, the principal constituent of seepage gas, is relatively unreactive and sparingly soluble.

The studies have enabled a new estimate of the distribution of gas seepages on the U.K. continental shelf, and of the contribution to atmospheric methane levels. The results suggest that natural gas seepages are significantly more important as a source of methane than had hitherto been established. It is estimated that between 120,000 and 3.5 mtonnes of methane per year come from a continental shelf area of about 600,000 km². This represents between 2% and 40% of the total United Kingdom methane emission. It is suggested that similar contributions arise from other continental shelf areas worldwide, and that geological sources of atmospheric methane are more significant than is generally acknowledged.     

Potential for irradiation of methane to form complex organic molecules in impact craters: Implications for Mars, Titan and Europa

The release of methane from crater sites following meteorite impact is a possible consequence of the thermal alteration of organic matter, or tapping of reservoired gas of biogenic or abiogenic origin. At least the latter is feasible on Mars. Methane and higher hydrocarbons are susceptible to polymerization and precipitation by radioactive minerals. Where such minerals are present in impact target rocks, the craters can be a preferred site for carbon concentration, and the formation of complex organic molecules. On icy bodies, such as Titan and Europa, methane released by impact could be a fuel for prebiotic chemistry involving other forms of irradiation.     

Aptian to Coniacian (Early–Late Cretaceous) palynostratigraphy of the Gustav Group, James Ross Basin, Antarctica

The Gustav Group of the James Ross Basin, Antarctic Peninsula, forms part of a major Southern Hemisphere Cretaceous reference section. Palynological data, chiefly from dinoflagellate cysts, integrated with macrofaunal evidence and strontium isotope stratigraphy, indicate that the Gustav Group, which is approximately 2.6 km thick, is Aptian–Coniacian in age. Aptian–Coniacian palynofloras in the James Ross Basin closely resemble coeval associations from Australia and New Zealand, and Australian palynological zonation schemes are applicable to the Gustav Group. The lowermost units, the coeval Pedersen and Lagrelius Point formations, have both yielded early Aptian dinoflagellate cysts. Because the overlying Kotick Point Formation is of early to mid Albian age, the Aptian/Albian boundary is placed, questionably, at the Lagrelius Point Formation–Kotick Point Formation boundary on James Ross Island, and this transition may be unconformable. Although the Kotick Point Formation is largely early Albian on dinoflagellate cyst evidence, the uppermost part of the formation appears to be of mid Albian age. This differentiation of the early and mid Albian has refined the age of the formation, previously considered to be Aptian–Albian, based on macrofaunal evidence. The Whisky Bay Formation is of late Albian to latest Turonian age on dinoflagellate cyst evidence and this supports the macrofaunal ages. Late Albian palynofloras have been recorded from the Gin Cove, lower Tumbledown Cliffs, Bibby Point and the lower–middle Lewis Hill members. However, the Cenomanian age of the upper Tumbledown Cliffs and Rum Cove members, based on molluscan evidence, is not supported by the dinoflagellate cyst floras and further work is required on this succession. The uppermost part of the Whisky Bay Formation in north-west James Ross Island is of mid to late Turonian age and this is confirmed by strontium isotope stratigraphy. The uppermost unit, the Hidden Lake Formation, is Coniacian in age on both palaeontological and strontium isotope evidence. The uppermost part of the formation appears to be early Santonian based on dinoflagellate cysts, but strontium isotope stratigraphy constrains this as being no younger than late Coniacian. This refined palynostratigraphy greatly improves the potential of the James Ross Basin as a major Cretaceous Southern Hemisphere reference section.     

Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS

The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.     

A TEM and EELS study of carbon in a melt fragment from the Gardnos impact structure

A carbon‐rich melt fragment from the Gardnos impact structure has been studied for a better understanding of the preservation and structural form(s) of carbon that have been processed by impact melting. The carbon was analyzed in situ in its original petrographic context within the melt fragment, using high‐resolution techniques including focused ion beam‐transmission electron microscopy and electron energy loss spectroscopy. Results show that the carbon is largely uniform and has a nanocrystalline grain size. The Gardnos carbon has a graphitic structure but with a large c/a ratio indicating disorder. The disorder could be a result of rapid heating to high temperatures during impact, followed by rapid cooling, with not enough time to crystallize into highly ordered graphite. However, temperature distribution during impact is extremely heterogenous, and the disordered Gardnos carbon could also represent material that avoided extreme temperatures, and thus, it was preserved. Understanding the structure of carbon during terrestrial impacts is important to help determine if the history of carbon within extraterrestrial samples is impact related. Furthermore, the degree of preservation of carbon during impact is key for locating and detecting organic compounds in extraterrestrial samples. This example from Gardnos, together with previous studies, shows that not all carbon is lost to oxidation during impact but that impact melting can encapsulate and preserve carbon where it is available.     

Why chromatic imaging matters

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u ? v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.     

Spatial variability in soil moisture as predicted from airborne thematic mapper (ATM) data

In the first part of this project, the extent to which moisture content of alluvial soils could be predicted from imagery derived from an airborne thematic mapper (ATM) was investigated. From sampling done on the same day as the flight, it was found that digital numbers derived from the thermal channel (waveband 11) were strongly correlated with gravimetric moisture content. From sampling three fields of contrasting land cover, the relationship between waveband 11 values and moisture content was found to be independent of land cover type. Spatial variation in waveband 11 values and thus moisture content were related to palaeochannel patterns on the alluvial land. This was investigated by deriving variograms for long transects from each of the three investigated fields. The range and sills of the variograms are shown to express the nature and pattern of palaeochannels. By the application of such geostatistical techniques, high resolution imagery can thus be used to quantify palaeochannel characteristics on alluvial land.