Advances in understanding of the mechanism for generation of earthquake thermal precursors detected by satellites

Stresses building up during an earthquake preparation phase also manifest themselves in the form of a so called increased land surface temperature (LST) leading to a thermal precursor prior to the earthquake event. This phenomenon has now been validated by our observations of short-term thermal anomalies detected by infrared satellite sensors for several recent past earthquakes around the world. The rise in infrared radiance temperature was seen to vary between 5 and 12 °C for different earthquakes. We discuss in this paper different explanations for the generation of such anomalies that have been offered. Emission of gases due to the opening and closure of micropores upon induced stresses and also the participation of ground water have been propounded as a possible cause for generation of thermal anomalies. Seismo-ionosphere coupling, by which gases like radon move to the earth–atmosphere interface and cause air ionization thus bringing about a change in air temperature, relative humidity, etc., has been put forth by some workers. A mechanism of low frequency electromagnetic emission was tested and experimented by scientists with rock masses in stressed conditions as those that exist at tectonic locations. The workers proposed the positive hole pair theory, which received support from several scientific groups. Positive holes (sites of electron deficiency) are activated in stressed rocks from pre-existing yet dormant positive hole pairs (PHPs) and their recombination at rock–air interface leads to a LST rise. A combination of remote sensing detection of rock mechanics behavior with a perception of chemistry and geophysics has been applied to propose the remote sensing rock mechanics theory. Remote sensing detections of such anomalies confirm so far proposed lab theories for such a hotly debated field as earthquake precursor study by providing unbiased observations with consistency in time and space distribution.     

Using spectral information from the NIR water absorption features for the retrieval of canopy water content

Canopy water content (CWC) is important for mapping and monitoring the condition of the terrestrial ecosystem. Spectral information related to the water absorption features at 970 nm and 1200 nm offers possibilities for deriving information on CWC. In this study, we compare the use of derivative spectra, spectral indices and continuum removal techniques for these regions. Hyperspectral reflectance data representing a range of canopies were simulated using the combined PROSPECT + SAILH model. Best results in estimating CWC were obtained by using spectral derivatives at the slopes of the 970 nm and 1200 nm water absorption features. Real data from two different test sites were analysed. Spectral information at both test sites was obtained with an ASD FieldSpec spectrometer, whereas at the second site HyMap airborne imaging spectrometer data were also acquired. Best results were obtained for the derivative spectra. In order to avoid the potential influence of atmospheric water vapour absorption bands the derivative of the reflectance on the right slope of the canopy water absorption feature at 970 nm can best be used for estimating CWC.     

地壳垂直形变模型的研究

本文重点研究了建立整个形变区域的形变速率曲面和形变加速率曲面,同时也研究了求这两种曲面的方法(基于多元逐步回归分析的间接法和直接法),从而使我们对整个形变区域有一个形变的整体概念,也使我们能方便地得出形变区任何一个已知其平面位置的点在任一观测期内的形变量。     

引黄入晋工程的桩号系统设计与应用

对于象引黄入晋工程这样的由多个混凝土建筑物紧密且“硬性”衔接而成的,高精度、超长线路工程来说,村号系统设计是一个十分重要且具有实际应用意义的问题,为了避免高斯投影误差与高程投影误差对桩号的影响,解决桩号方面由此而引起的矛盾,以及满足工程远程运营管理对桩号的要求,作者提出了在工程的勘测设计、施工和运营管理等阶段中,应分别使用设计桩号、施工桩号和管理桩号,这３种桩号就构成了超长线路工程的桩号系统。文中     

基于人工神经网络面插值的方法研究

前人研究表明三层前向人工神经网络不仅能以任意精度逼近任意函数,还能以任何精度逼近其各阶导数。根据这一特性,本文将反向传播网络（Ｂａｃｋ－Ｐｒｏｐａｇａｔｉｏｎ,简称ＢＰ网络）应用于面插值。本文认定地理要素的空间分布可以用一复杂的非线性函数模拟,该函数是由多种因素综合作用的结果,即地理要素的值是这些因素的函数,如果以各因素的输入、对应地理要素值为期望输出,对网络进行训练可对地理要素的空间分布进行模拟     

近红外波段(900—2500 nm)水吸收系数测量

根据水在红外波段强吸收且吸收能力变化大的特点,在所提出可见光波段水吸收系数测量系统基础上增设了薄层水测量装置,使得测量水层厚度可在0.04—350 mm之间变化。在此基础上对厚度为0.04—150 mm的多个厚度水层进行了吸收系数测量,并对消除杂质影响后的测量数据进行了有效整合,得到900—2500 nm波段纯水吸收系数。由于确保了各波段数据均在仪器最佳探测区间取得,所得结果精度较高,且与被普遍接受的前期研究结果相一致,可作为相关定量遥感的基础数据。     

联合机载LiDAR数据和潮汐数据自动提取潮位线

首先,联合机载激光雷达(LiDAR)数据提取的海岸带数字表面模型(DSM)与验潮站数据提取的高、低潮面进行相交运算,生成"水陆二值图像",然后对其以提取边缘的方式提取高、低潮潮位线;针对LiDAR光束无法穿透水体导致低潮线附近DSM为无效值的缺陷,采取移动趋势面拟合法外推概略低潮线附近DSM,在此基础上重新提取更精确的低潮潮位线。实验表明,该方法能在较少人工干预的情况下有效提取高、低潮潮位线。     

Water-poverty relationships in the coastal town of Mbour (Senegal): Relevance of GIS for decision support

Coastal area is always a zone with complex problems. Due to the attraction they exert, are facing many social problems. Therefore, a coastal city is usually a city with problems. Its extension, caused by the influx of people from different backgrounds, creates an increased demand for services. One of the problems frequently encountered, especially in Senegal, is access to water. The problem of access to water is poorly treated, without being correlated with the urban evolution, i.e. with increasing population and demand growth. The water resource is facing numerous complications such as the lack of integrated management, integration issues at the governance level, where the local factor is often forgotten.The town of Mbour, object of our study, does not come out of that lot, being an attractive coastal city, from an African country. This indicates the need for an integrated management oriented from local to a global basis and not vice versa. The study presented in this paper indicates that a large proportion of the population has not access to a verified drinking water system and uses water from wells or standpipes. Half of the surveyed population (50%) has no access to a water supply system. The water poverty map of the town overlaps with that of the general poverty excepting few neighborhoods. This means that even areas that are not affected by poverty have a very low or poor access to water, which so far remains the perverse effect of the reform of the Senegalese water sector in 1995.     

Automatic techniques for 3D reconstruction of critical workplace body postures from range imaging data

The paper shows techniques for the determination of structured motion parameters from range camera image sequences. The core contribution of the work presented here is the development of an integrated least squares 3D tracking approach based on amplitude and range image sequences to calculate dense 3D motion vector fields. Geometric primitives of a human body model are fitted to time series of range camera point clouds using these vector fields as additional information. Body poses and motion information for individual body parts are derived from the model fit. On the basis of these pose and motion parameters, critical body postures are detected. The primary aim of the study is to automate ergonomic studies for risk assessments regulated by law, identifying harmful movements and awkward body postures in a workplace.     

丹江口水库面积季节变化遥感监测

基于2014年2月19日、2014年6月7日和2014年10月8日的三景资源三号卫星影像分别作为春季、夏季和秋季的代表,以河南省内的丹江口水库为研究区域,采用面向对象的遥感影像监督分类方法进行影像的分割和分类,提取出遥感影像中的水体,并结合南水北调中线工程对水域面积和周围地物的影响对这3个时期的影像进行比较和分析,得出这3个时期水域面积的变化数据。