起伏地形下重庆市水汽压的空间分布

利用重庆市1∶25万电子地图和100m×100m分辨率的DEM资料,建立了基于常规气象观测资料的实际起伏地形下重庆市水汽压空间分布模型,计算了重庆市各月月平均和年平均水汽压的空间分布,并完成其制图同时详细分析了重庆市实际地形下水汽压的空间分布。分析表明:随着海拔高度的增加,水汽压逐渐减小;各月水汽压的最小值出现在东北山区;重庆市水汽压的季节变化很明显。     

HST observations of azimuthal asymmetry in Saturn's rings

From 378 Hubble Space Telescope WFPC2 images obtained between 1996-2004, we have measured the detailed nature of azimuthal brightness variations in Saturn's rings. The extensive geometric coverage, high spatial resolution (), and photometric precision of the UBVRI images have enabled us to determine the dependence of the asymmetry amplitude and longitude of minimum brightness on orbital radius, ring elevation, wavelength, solar phase angle, and solar longitude. We explore a suite of dynamical models of self-gravity wakes for two particle size distributions: a single size and a power law distribution spanning a decade in particle radius. From these N-body simulations, we calculate the resultant wake-driven brightness asymmetry for any given illumination and viewing geometry. The models reproduce many of the observed properties of the asymmetry, including the shape and location of the brightness minimum and the trends with ring elevation and solar longitude. They also account for the “tilt effect” in the A and B rings: the change in mean ring brightness with effective ring opening angle, |Beff|. The predicted asymmetry depends sensitively on dynamical ring particle properties such as the coefficient of restitution and internal mass density, and relatively weakly on photometric parameters such as albedo and scattering phase function. The asymmetry is strongest in the A ring, reaching a maximum amplitude A∼25% near a=128,000 km. Here, the observations are well-matched by an internal particle density near 450 kg m⁻³ and a narrow particle size distribution. The B ring shows significant asymmetry (∼5%) in regions of relatively low optical depth (τ∼0.7). In the middle and outer B ring, where τ?1, the asymmetry is much weaker (∼1%), and in the C ring, A<0.5%. The asymmetry diminishes near opposition and at shorter wavelengths, where the albedo of the ring particles is lower and multiple-scattering effects are diminished. The asymmetry amplitude varies strongly with ring elevation angle, reaching a peak near |Beff|=10° in the A ring and at |Beff|=15-20° in the B ring. These trends provide an estimate of the thickness of the self-gravity wakes responsible for the asymmetry. Local radial variations in the amplitude of the asymmetry within both the A and B rings are probably caused by regional differences in the particle size distribution.     

输变电设施电磁辐射环境影响评价方法探讨

结合输变电设施周围电磁环境特点,对其电磁辐射环境影响评价方法进行探讨,提出相应的电磁辐射污染防治措施与建议,消除公众疑虑。在此基础上,总结当前电磁辐射环评工作中存在的问题,以期为后续同类问题深入研究提供思路。     

Numerical analysis on post-grouted drilled shafts: A case study at the Brazo River Bridge,TX

This paper investigates the effects of post-grouting on the behavior of drilled shafts using a case study carried out at the Brazo River, Texas. Commercial finite element software, PLAXIS, was used to quantify the improvement of the tip resistance and side shear resistance of post-grouted drilled shafts (PGDS). The input material parameters of PLAXIS were initially estimated using CPT sounding results, and then the parameters were updated by calibrating the numerical results against full-scale STATNAMIC load test results. Based on the numerical analysis, the authors concluded that (1) the increase in total resistance of PGDS resulted from soil improvement at the shaft tip, (2) the apparent increase in side shear resistance resulted from side shear reversal that occurred during post-grouting, and (3) the apparent increase in the tip resistance of PGDS may be caused by stress relief of the grout. In addition, two approaches to estimate the resistance of PGDS were compared against numerical results. In this case study, the Axial Capacity Multiplier (ACM) approach over-predicted the total resistance whereas the Tip Capacity Multiplier (TCM) approach reasonably predicted the increase in total resistance.     

冈底斯东段泽当大型钨铜钼矿新发现及走滑型陆缘成矿新认识

冈底斯成矿带以斑岩型铜矿(伴生钼矿)为主体,通常作为"挤压型"陆缘岩浆弧—"碰撞裂谷带"斑岩成矿的典型代表而被广泛关注,但层矽卡岩型钨铜钼矿和斑岩型独立钼矿的勘查和研究却未能引起足够的重视,尤其是层矽卡岩型白钨矿的发现,填补了区带矿种的空白;在雅鲁藏布江缝合带边部发现的隐伏斑岩型钼矿,突破了"挤压型"陆缘成矿认识的传统误区。中国冶金地质总局新近发现的冈底斯东段则当钨铜钼矿,既是一处大型钨铜钼矿详查开发基地,又是一组统一于陆缘走滑断裂构造成矿体制作用的钨、铜、钼矿床组合,称为"泽当矿田"。在NWW向雅鲁藏布江缝合带陆缘走滑断裂作用下,早期(68～40.3Ma)拉分型转换构造——NEE向剥离断层,控制了层矽卡岩型钨铜钼矿的形成;在NEE向冲木达陆缘走滑断裂作用下,晚期(30.26～23.62Ma)推闭型转换构造——NWW向逆冲断层,控制了隐伏斑岩型钼矿的形成。层矽卡岩型矿床形成和改造于68～66Ma和57～40.3Ma,叠加富集于斑岩型矿床的形成阶段——30.26～23.62Ma。     

1948-2009年塔里木盆地空中水汽输送时空分布特征

利用1948-2009年美国NCEP/NCAR的逐月再分析资料(2.5°×2.5°),分析了塔里木地区大气中不同层次水平和垂直方向的水汽输入、输出和收支情况及其变化趋势.结果表明:1)塔里木盆地上空水平方向为水汽汇,且纬向贡献大于经向,垂直方向水汽主要由下层向中上层输送;2)水汽的水平和垂直净收支均具有季节性变化,且夏季辐合为主,冬季辐散为主;3)水汽的水平和垂直输送都表现为较一致的年际变化,且均在1970年代中后期出现了较明显的年代际突变;4)在1978年到2003年全球变暖明显的时段内,水平方向水汽净输入量呈减少趋势,垂直方向呈增加趋势.可以认为,在气候变化背景下,全球变暖加速了水循环,但同时改变了纬向的热力差异,导致塔里木盆地局地水循环的加速,以及经向水汽净输入量的减少.     

济南市长清区矿业权出让管理规范化探索

济南市长清区具有丰富的矿产资源,矿产资源的开发为经济建设提供了充足的建筑材料。但是一直以来无序、无规划的开采,在一定程度上也破坏了自然环境。长清设区后,长清区不断推进矿产资源有偿使用制度改革,逐步建立完善矿业权有偿出让相关制度,对出让的矿业权一律以市场竞争的方式有偿出让。进一步规范了全区采矿权出让行为,巩固了整顿和规范矿产资源开发秩序工作成果。     

壳聚糖/纳米铜复合微球的制备及其对刚果红染料的脱色性能

以壳聚糖和CuCl₂·2H₂O为原料,分别采用直接负载法和吸附法成功制备了壳聚糖/纳米铜复合微球,运用傅里叶变换红外光谱(FT-IR)、X-射线衍射(XDR)和扫描电镜(SEM)对催化剂结构进行了表征。以刚果红(CR)染料为目标污染物,评价了催化剂的制备方法、制备条件及氢转移催化反应条件对其催化性能的影响。结果表明,由直接负载法(CS/CuNPs)和吸附法(CS/CuNPs-X)制备的壳聚糖/纳米铜复合微球在CR染料浓度为100 mg/L,催化剂投加量为0.05 g,供氢体浓度为0.05 mol/L的氢转移催化反应条件下,催化反应进行180和60 min时CR脱色率可分别达95.8%和96.8%。CS/CuNPs-X比CS/CuNPs表现了更高的对CR氢转移催化反应的催化速率。两种催化剂催化还原CR染料的反应均符合准一级动力学模型。在连续循环使用10次后,CS/CuNPs和CS/CuNPs-X对CR的脱色率分别为93.9%和89.4%,表明催化剂具有良好的重复使用性能。     

湘西合仁坪钠长石-石英脉型金矿床围岩蚀变及质量平衡

湘西柳林汊一带钠长石-石英脉型金矿十分发育。为了揭示该区金矿的成矿物质来源、成矿过程及成矿流体信息,对该区最典型的合仁坪钠长石-石英脉型金矿床围岩蚀变特征进行研究,并利用标准化Isocon图解法,对围岩蚀变过程中物质带入、带出进行质量平衡计算。结果表明:合仁坪金矿床的围岩蚀变主要包括绢云母化(褪色化)、黄铁矿化和绿泥石化,其中褪色化分布最为广泛,是该区金矿床最重要的蚀变类型;在合仁坪金矿床形成过程中,围岩中的Al2O3为惰性组分,Na2O、Sr、V、Cr、W、Nb、Th及部分挥发分(S、CO2和H2O)等组分被带入围岩中,而SiO2、Fe2O3、K2O、CaO、MgO、Cu、As、Pb、Zn、Ni、Co、Sb、Li、Rb、Ba等组分从围岩中迁出;轻稀土元素的迁出程度远远大于重稀土元素,围岩蚀变过程中轻、重稀土元素发生强烈的分异;矿脉中钠长石的钠质并非来自赋矿围岩,而是由成矿流体从外界带入的;矿脉石英中硅质则部分来自赋矿围岩。