施工降水中的环境保护及水资源合理利用

城市缺水是目前带有普遍性的重大问题 ,但在城市建设过程中 ,宝贵的地下水资源遭到浪费的现象又大量存在 ,解决好施工降水与环境保护问题是关系到城市发展的重要问题之一 ,结合郑州市的工程实践 ,谈谈施工降水中的环境保护及水资源合理利用问题。     

破坏性地震应急预案管理子系统的开发构想

本文阐述了以地震应急指挥流程为框架并基于WEB的管理系统的实现方案 ,对管理系统的使用和维护提出了相关建议。     

基于热流固耦合的增强型地热有机朗肯循环发电系统性能分析

本文建立了耦合井筒、热储、有机朗肯循环发电系统的详细数学模型, 包括三维非稳态热流固耦合模型和有机朗肯循环发电系统热动力学模型, 参考青海省共和县恰卜恰干热岩体地热地质特征, 包括压裂储层、围岩、裂隙、井筒等特征参数, 研究了注入流量、注入温度和井间距对系统净输出功、年均净输出功和热效率的影响规律。结果表明: 在一定的注入流量、注入温度和净间距下, 随着时间的推移, 岩石孔隙压力和热应力作用使得裂隙渗透率增大, 注入泵功耗是降低的, 净输出功和热效率也是降低的。注入流量的增大提高了膨胀机轴功、注入泵功耗和生产温度衰减速率, 进而导致热效率降低, 存在最优的注入流量50 kg/s, 使得年均净输出功达到最大值1 470.1 kW。注入温度的增大可以提高系统热效率, 降低净输出功的年均衰减速率, 当注入温度为60 ℃时, 年均净输出功最大。井间距的增大减缓了生产温度的衰减速率, 有利于热效率的提高, 但是也同时也增大了膨胀机轴功和注入泵功耗。当分支井间距为450 m时, 年均净输出功达到最大值1 497.3 kW。此研究可为增强地热发电系统的开发利用提供指导。     

伊朗北部阿哈尔地区土地利用信息的遥感分类与制图

遥感作为目前快速实现全球或大区域对地观测的最佳方法,在“一带一路”沿线地区地表信息获取方面具有重要的作用。总结了遥感技术在伊朗北部土地利用分类与制图的流程和方法,在土地利用分类体系、遥感分类方法和成果制图3个方面进行了研究。通过土地利用信息遥感分类标志,建立非接触的土地利用信息分类工作方法,保证了良好的工作精度。进行了伊朗北部地区土地利用信息的遥感制图,获取了该地区土地利用状况,为我国矿业企业与地质调查部门开展“一带一路”区域合作提供了技术支撑和决策依据,为开展境外土地利用信息的提取与制图工作提供了案例。     

Conservation tillage and input use

 There continues to be a question as to the overall effectiveness of conservation tillage practices in reducing the impact of agricultural production on the environment. While it is generally recognized that water runoff and soil erosion will decline further, as tillage and mulch tillage systems are not used more extensively on cropland, what will happen to pesticide and fertilizer use remains uncertain. To gain some insight into this, the conservation tillage adoption decision is modelled. On the assumption that the decision to adopt conservation tillage is a two-step procedure, the first decision is whether or not to adopt a conservation tillage production system and the second concerns the extent to which conservation tillage should be used – appropriate models of the Cragg and Heckman (dominance) type are estimated. Based on farm-level data on corn production in the United States for 1987, the profile of a farm on which conservation tillage was adopted is that the cropland had above-average slope and experienced above-average rainfall, the farm was a cash grain enterprise, and it had an above-average expenditure on pesticides and a below-average expenditure on fuel and custom pesticide applications. Additionally, for a farm adopting a no-tillage production practice, an above-average expenditure was made on fertilizer. Received: 18 September 1995 · Accepted: 6 December 1995     

莱芜市用地瓶颈措施问题解析

当前,国家收紧地根,从严控制新增建设用地指标成为各地建设项目顺利落地的制约瓶颈。为破解这一难题,结合莱芜实际,分析了规划修编、指标利用、挖潜存量、加快供地等做法,对保障项目用地提出了建议和对策。     

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.     

The influence of topography and land use on water quality of Xiangxi River in Three Gorges Reservoir region

A self-organizing map (SOM) was used to cluster the water quality data of Xiangxi River in the Three Gorges Reservoir region. The results showed that 81 sampling sites could be divided into several groups representing different land use types. The forest dominated region had low concentrations of most nutrient variables except COD, whereas the agricultural region had high concentrations of NO₃N, TN, Alkalinity, and Hardness. The sites downstream of an urban area were high in NH₃N, NO₂N, PO₄P and TP. Redundancy analysis was used to identify the individual effects of topography and land use on river water quality. The results revealed that the watershed factors accounted for 61.7% variations of water quality in the Xiangxi River. Specifically, topographical characteristics explained 26.0% variations of water quality, land use explained 10.2%, and topography and land use together explained 25.5%. More than 50% of the variation in most water quality variables was explained by watershed characteristics. However, water quality variables which are strongly influenced by urban and industrial point source pollution (NH₃N, NO₂N, PO₄P and TP) were not as well correlated with watershed characteristics.     

探采结合和数值模拟

本文用一个工程实例说明正确运用数值模拟,可代替现行水文地质勘探阶段的开采性抽水试验,从而可节省资金和缩短勘探及建设工期。文中强调。务使所用数学模型尽可能地逼近和反映水源地所在水文地质单元的原型。否则,模型易失真,必导致资源评价的失败。