矿岩界线的自动推连

着重讨论了如何利用人工智能技术进行矿岩界线的自动推断和连接，包括对所研制的基于知识的矿岩界线自动推连系统（ＡＩＳＭＢ）的措述，关于数据与知识的表示和组织、推理过程、策略以及系统实现等内容。     

An analysis of coal bump liability in a bump prone mine

Summary This paper presents an analysis of causes of bump in a deep coal mine. The analysis consists of in-mine measurement determination, analysis of physical and mechanical properties of mine materials and simulation of mine layout and mining sequence. Major factors contributing to the causes of bump have been reviewed and those that are related to this case have been identified and simulated analytically using a three-dimensional finite element method.     

Roof bolting in underground mining: a state-of-the-art review

Conclusions With continuing investigations and developments, roof bolting today can in most cases successfully reinforce the mine roof in underground mining. In order to cope with the increasing use of roof bolts, efforts should be made to maximize the safety and minimize the cost. With regard to mechanical bolting, two important parameters need more advanced improvements and study, namely, optimum design of the shape and type of expansion shell and optimum bolt tension for a specific bolt pattern. For the fully grouted resin bolt, the most critical requirement is to develop a fast-setting, low-cost, intoxic, inflammable grouting material that can be used in the high speed mining cycle. It should be noted that geological conditions such as the strata type, rock properties,in situ stress, and planes of weakness play an important role in the successful application of any roof bolting system. These factors should be specified as accurately and quantitatively as possible in the design of any roof bolting system. Finally, proper and careful installation and continuous monitoring are imperative for the success of any roof bolting system.     

湖南童家院锑矿床地下空洞的成因探讨

童家院锑矿床广泛发育地下空洞,影响矿山开采。本文根据矿田构造和矿化特征研究,认为本区至少经受过两期构造应力作用。成矿前,在左旋水平扭动作用下,形成NE向锡矿山复式背斜、纵向逆断层和矿化空洞,成矿后,在NE向挤压应力下,产生了NW向叠加褶皱以及正断层。同时,该应力场所控制的层间破碎带和背斜,大大影响了地下空洞的成生和分布。     

考虑土体固液二相性质的地下管线地震反应研究

本文将管线周围的土体视为固-液二相介质，采用考虑地震过程中土体内孔隙水压力的增长和消散的有效应力分析方法，并以非线性的土体本构模型模拟土体动力特性的改变以及在孔隙水压作用下的变形，以求接近土体的真实地震反应。研究表明随着土体软化程度的不同，受到土体约束的管线应力亦发生相应变化。文中详细研究了地震动峰值、管线直径、行波波速和入射角度等对管线应力的影响。     

新疆乌恰县乌拉根铅锌矿床地质地球化学特征及其成因探讨

在研究矿床的地质地球化学特征的基础上,对矿床成因进行了初步探讨,认为乌拉根铅锌矿床是产于中新生代盆地中的热卤水沉积铅锌矿床.其矿质来源主要是由热卤水溶液从深部带至沉积盆地,控制盆地生成和发展的同生断裂为矿液运移提供了通道,稳定下沉的次生盆地提供了良好的矿质沉积环境.     

内蒙古乌达地区地球物理场特征与地下煤火分布

以2004年内蒙古乌达地区1:5000大比例尺的直升机航空电磁、磁综合测量资料为基础,结合地面煤田地质、物探、遥感等资料,对内蒙古乌达地区的航空磁场特征、航空电磁场特征与地下煤火分布的关系进行了分析与研究,在综合分析的基础上,建立了该区的地下煤火划分标志,并对该区的地下煤火分布和燃烧状况进行了分析和圈定.     

腾格里地区盐湖的盐类沉积特征

腾格里沙漠122个盐湖分为石盐、石盐-芒硝、石盐-白钠镁矾及芒硝(石膏)4种类型。盐湖含盐系厚度一般4～9m,总体呈现下部为含盐碎屑沉积,上部以盐类沉积为主,构成储卤层,卤水赋存其中,由湖岸至湖心储卤层厚度增长。含卤层理渐小,卤水含KCl渐高。盐湖中矿物主要为碳酸盐矿物,以芒硝、石膏为主的硫酸盐矿物、石盐以及粘土矿物。盐湖卤水以晶间卤水为主。许多卤水含K+大于2g/L。K+含量最高的红盐池,平均含量达19.14g/L。对钾矿而言,在盐湖分布相对集中地区,有一定的综合开发利用前景。     

我国高碘卤水分布规律及其形成(续完)——高碘卤水的形成条件和找碘方向

根据国内外大量实际资料,从碘的分布情况及其所处的地质条件,结合石油和天然气形成过程、油气藏类型及其分布特点,探讨高碘卤水分布的规律及其形成条件,在此基础上指出了我国的找碘方向。