Method of high-density seismic imaging ex-ploration and application samples

Introduction Now, shallow seismic reflection wave technique has been used extensively in geological ex-plorations of bridge, dam, high building and so on. Since shallow seismic reflection wave tech-nique is often implemented in industrial zone or city with dense population, the background dis-turbance including industrial noise, life noise, etc is very serious. Furthermore, the disturbance of seismic source is also serious due to short array length and offset of the method. In general, shal-lo…     

近间距并行管线探测方法的效果对比

介绍了管线探测的几种方法,结合实例,对近间距并行管线的几种探测方法的效果进行了比较。     

能量色散X射线荧光光谱法测定卤水中痕量溴铷砷

用模拟卤水建立了能量色散X射线荧光光谱法测定卤水中溴、铷、砷痕量元素含量的方法.实验表明,方法可以直接取样测定,适用于大批量样品的测试分析.方法的精密度RSD(n＝15)小于1%,加标回收率为86.8%～101.6%.卤水中溴、铷、砷的测定结果与比色法、原子吸收和原子荧光法结果相符.     

大冶铁矿露天转地下开采的离散元数值模拟研究

离散单元方法特别适合于节理比较发育的岩体。对于模拟和分析矿山中因采矿引起的围岩松动和冒落等力学行为是比较有效的。用离散单元法研究了大冶铁矿狮子山采区露天转地下开采，采用充填法、崩落法采掘对露天边坡和围岩的影响及围岩变形规律，并得出了相应的结论，为设计和方案的选用提供了一些有益的根据。     

中国2010年上海世博会场址区地质环境条件分析与评价

文章在简要介绍世博会场址地质条件的基础上，分别分析了场址区流砂、软土和地下水等不良地质现象对工程建设的影响，然后评价了场址区天然地基工程、桩基工程以及地下工程建设的适宜性，为世博会场址区工程建设提供必要的地质依据。     

澜沧江某水电站左岸地下式厂房岩体质量分级

通过大量的现场调查数据与统计工作结果，采用了多种岩体质量分级评价方案，对澜沧江某水电站左岸地下式厂房岩体质量进行了精细的评价，最后将各种结果进行对比分析，得到一个合理、科学的综合岩体质量综合评价分级。并根据评价结果，作出了研究区坝址左岸地下式厂房岩体在不同高程的岩体质量分区图，为下一步的参数选取工作奠定了必要的基础。     

某水电站地下厂房硐室群岩爆预测与防治研究

拟建某水电站的大型地下厂房硐室群处于中等偏高的地应力环境中，在前期的勘探过程中已发现一些与岩爆密切相关的地质现象。因此合理地评价其开挖过程中岩爆发生的可能性、岩爆的烈度、分布范围以及相应的预测防治措施具有重要的工程意义。基于此，文章首先从岩爆发生的基本条件、地质宏观评价的角度对硐室群施工过程中岩爆发生的可能性进行了评估；然后，分别采用定性方法和工程地质类比法对该地下硐室群岩爆发生的烈度进行了评价；进而根据三维有限元模拟结果对岩爆发生的部位进行了圈定。最后，针对所研究的地下硐室群的具体情况，提出了相应的防治措施，即加强监测和超前预报，并采用以围岩弱化为主，围岩强化为辅的治理措施。     

某浅埋地下洞室围岩稳定及渐进破坏过程分析

以新疆乌鲁木齐市"世纪花苑"三期工程废弃人防地道为实例,在查明研究区浅埋洞室分布特征的基础上,结合现场及室内试验获取相关岩土体物理力学参数,利用快速拉格朗日差分分析程序FLAC研究浅埋洞室在拟建高层荷载作用下的稳定性及其破坏过程,通过系列模拟图,较真实地再现了洞室围岩变形破坏、尤其是塑性区发展变化过程。     

Hydrogeochemistry of karst underground waters at shallow depth in Guiyang City, Guizhou Province

The aim of this study is to shed light on the hydrogeochemical characteristics of karst underground waters at shallow depth in Guiyang City, Guizhou Province with an emphasis on the geochemistry of major elements. Guiyang City bears abundant underground waters and it is also an important representative of the karst areas throughout the world. Ca^2 and Mg^2 are the dominant cations, accounting for 81% -99.7% of the total, and HCO3^- and SO4^2- are the dominant anions. Weathering of limestones and dolostones is the most important factor controlling the hydrogeochemistry of underground waters, and weathering of sulfate and evaporite rocks is less important. Moreover, the precipitation and human activities also have a definite influence on the hydrogeoehemistry of underground waters in the region studied.     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.