盘锦冬季城区机动车污染物排放模拟研究

采用美国环境保护局开发的机动车排放因子模型Mobile5,计算了2005年盘锦冬季机动车单车排放因子在不同车型条件下的排放情况。结果表明:不同车型的机动车其单车排放因子随着车速的增加而呈不同趋势的变化,HC和CO逐渐降低,而NOx随车型的变化而变化。     

用过程透雨量确定的东亚夏季风北边缘特征

利用1951—2006年全国715个站逐日降水资料及NCEP/NCAR逐日和月平均再分析资料, 以农作物生长角度为出发点, 采用过程透雨量 (20 mm) 标准确定4—10月出现6次及6次以上过程透雨量作为东亚夏季风区, 以北边缘历年波动范围确定夏季风边缘带, 根据连续透雨过程达到无旱标准来判断东亚夏季风的开始时间。主要分析了夏季风北边缘的年际、年代际变化特征和夏季风边缘带的变化范围以及夏季风边缘的推进过程和北边缘变化机制及其对我国降水的影响。结果表明:透雨标准较好地确定了边缘带位置, 夏季风北边缘呈现向南偏移的趋势, 边缘带范围有所扩大; 北边缘变化与偏南风强弱和水汽输送联系紧密, 并且对我国雨带的分布以及北方降水有一定影响, 北边缘偏北, 雨带偏北, 则华北降水偏多。     

Geochemistry of main types of gold deposits in shear zones, China

Shear zone-hosted gold deposits in China can be divided into four types:ductile,brittle-ductile,ductile-brittle and brittle,of which the ductile and brittle types are the basic ones.All these types of gold deposits have their own geochemical characteristics.The Hetai gold deposit in Guangdong Province,for example,is a mylonite-type gold deposit in a ductile shear zone.With increasing mylonitization,obvious changes took place in trace elements in minerals and rocks,enriching gold and mineralizing elements.The S and Pb isotope data indicated that the ore-forming materials were derived from the strata.Hydrogen and oxygen isotopic and fluid inclusion studies also implied that the ore-forming fluid was much closer to meteoric water from the early to the late ore-forming stage.The Linglong gold deposit,Shangdong Province,is a quartz-type gold deposit in a brittle shear zone.Changes in rocks,minerals and trace elements occurred in the process of f ormation of gold quartz veins,and the analytical results of S,Pb ,Hand O isotopes showed that ore deposition is connected not only with the Jiaodong Group,but also with anatexic granites.     

Sanjiang Tethyan metallogenesis in S.W. China: Tectonic setting, metallogenic epochs and deposit types

Tectonically, the Sanjiang Tethyan Metallogenic Domain (STMD) is located within the eastern Himalayan–Tibetan Orogen in the Sanjiang Tethys, southwestern China. Although this metallogenic domain was initiated in the Early Palaeozoic, extensive metallogenesis occurred in the Late Palaeozoic, Late Triassic and Himalayan (Tertiary) epochs. Corresponding tectonic settings and environments in the domain are: an arc-basin system related to the subduction of the Palaeo-Tethyan oceanic slabs; a post-collision crustal extension setting caused by the lithospheric delamination or slab breakoff underneath the Sanjiang Tethys during the Late Triassic; large-scale strike-slip faulting and thrusting systems due to the Indo-Asian continent collision since the Palaeocene. In this metallogenic domain important gold, copper, base metals, rare metals and tin ore belts, incorporating a large number of giant deposits, were developed. The main types of deposits include: (1) porphyry copper deposits, controlled by a large-scale strike-slip fault system, (2) VHMS deposits, mainly occurring in intra-arc rift basins and post-collision crustal extensional basins, (3) shear-zone type gold deposits in the ophiolitic mélange zone along the thrusting–shearing system, (4) hydrothermal silver-polymetallic deposits in the Triassic intra-continental rift basins and Tertiary strike-slip pull-apart basins, and (5) Himalayan granite-related greisen-type tin and rare-metallic deposits. Within the metallogenic epochs of the Late Palaeozoic to Cenozoic, the styles and types of the ore deposits changed from VHMS types in the Late Palaeozoic through exhalative-sedimentary type deposits in the Late Triassic, to porphyry-type copper deposits, shear-zone type gold deposits, hydrothermal vein-type silver-polymetallic deposits, greisen-type tin and rare-metal deposits in the Cenozoic. Correspondingly, ore-forming metals also changed from a Pb–Zn–Cu–Ag association through Ag–Cu–Pb–Zn, Fe–Ag–Pb and Ag–Au–Hg associations, to Ag–Cu–Pb–Zn, Cu–Mo, Au, Sn, and Li–Rb–Cs–Nb–Zr–Hf–Y–Ce–Sc associations.     

与陆相火山作用有关的稀有金属矿化

与陆相火山作用有关的稀有金属矿床可划分为三种类型,即含稀有金属火山岩矿床,火山期后热液矿床和火山岩风化矿床。从火山岩浆作用、火山构造及围岩地层成矿条件,初步探讨了内生成矿控制因素,并指出火山岩型稀有稀土矿床在我国具有找矿前景。     

甘肃金山、马泉金矿床成因类型及其对比研究

金山、马泉金矿床是礼县-白云-山阳大断裂西段膨大、分支锐角夹持区的两个中型金矿床。通过对矿床区域地质背景、矿床地质特征、成因等要素的对比分析;对中川岩体及含金性特征及中石炭统、中泥盆统含金性的研究,认为金矿的金源应来自浅部地层。通过对石英样品δ18O的测定,认为矿石的主要物质成分——氧来自地层;通过成矿溶液水的氧氢同位素特征的测定,认为成矿溶液水是少量岩浆水渗入了大量的大气降水组成的混合热液水;通过分析硫同位素特征和稀土元素配分模式,认为硫具深源性,而稀土元素来自地层。对成矿物理化学条件的研究,认为在中低温弱矿化度、弱酸性、弱还原条件下成矿。中川岩体是矿床形成的热源体;矿床应属微细浸染型（即卡林型）金矿床。认为这2个矿床应属较大的金矿床,在以后的地质勘查中应统筹考虑、（特别是在两个矿床的结合部）,以便扩大金矿床规模。     

Indicative features of placer gold for the prediction of the formation types of gold deposits (east of the Siberian Platform)

Prediction and search for gold deposits in the east of the Siberian Platform are problematic because the study area is overlain by a thick cover of MZ-KZ deposits. Search for gold deposits by the largest geological institutions using conventional methods have not yielded positive results, because the main attention was focused on the discovery of ancient gold-bearing conglomerates of the Witwatersrand type and on the evaluation of the gold ore potential of basic magmatism. Typomorphism of placer gold bears huge information about the genesis of native gold, both its primary endogenous origin and its exogenous transformation, which makes it possible to identify the formation type of mineralization, increases the reliability of the prediction of gold deposits, and ensures their purposeful search in the platform areas. The revealed indicative features of placer gold made it possible to substantiate the formation of the gold ore sources of Precambrian low-sulfide gold-quartz, gold-iron-quartzite, porphyry gold-copper, and gold-PGE mineralization and Mesozoic gold-silver, gold-rare-metal, and gold-sulfide-quartz mineralization in the east of the Siberian Platform. We have established that high-fineness placer gold with microinclusions of pyrite, arsenopyrite, quartz, and carbonates with recrystallized structures and lines of plastic deformation is specific to the ore sources of low-sulfide gold-quartz mineralization. A high content of Cu (up to 4%) in flaky high-fineness gold is one of indicators of porphyry gold-copper mineralization. The angular shape of gold grains, the fine fraction and high fineness of gold, its completely recrystallized and regrown internal structure, and the permanent presence of Fe, Bi, and Cu microimpurities and hematite, ilmenite, and corundum microinclusions are typical of gold-iron-quartzite mineralization. Flaky and laminated high-fineness gold particles with steady Pt, Pd, and Ni impurities and Pt-mineral phases and Au-Pt intergrowths in them testify to the ore sources of gold-PGE mineralization. Laminated and cloddy gold fractions of > 0.25-2.0 mm, the medium and low fineness of gold, its single-crystal or, sometimes, porous internal structure, the wide range of microimpurities (Pb, Zn, As, Sb, Cu, Te, etc.), and microinclusions of native Ag, adularia, Sr-barite, and calcite are indicators of gold-silver mineralization. Laminated, dendritic, and cloddy-angular gold grains, wide variation in gold fineness (307-950‰), and the presence of microinclusions of native bismuth, maldonite, arsenopyrite, and silver tellurides are indicative of gold-rare-metal mineralization. Laminated and cloddy gold grains, their size varying from dust to > 0.25 mm, their mono- and coarse-grained internal structure, wide variation in gold fineness (600-900‰), and the presence of Hg microimpurities (up to 6% and more) and microinclusions of quartz, calcite, pyrite, arsenopyrite, tellurides, selenides, and REE phosphates point to gold-sulfide-quartz mineralization. The established placer gold indicators of the particular formation types of ore sources in the east of the Siberian Platform made it possible to predict Precambrian gold deposits with low-sulfide-gold-quartz mineralization similar to the Kirkland Lake and Porcupine mines and gold deposits with Mesozoic gold-silver mineralization similar to the Cripple Creek mine. The developed criteria for determining the types of mineralization by indicative features of placer gold give an insight into the ore genesis and can be successfully applied to prediction and search for gold deposits and to evaluation of their gold resources.     

我国金红石矿床成因类型及成矿区带

我国金红石矿床分为 10大成因类型 :高、超高压正变质型、中高压正变质类型、中低压正变质类型、中高压负变质类型、低压负变质类型、变质蚀变型、岩浆型、热液充填型、热液蚀变型及沉积型 ;前6种类型常为大型 ,是主要类型。有 5个成矿区带 :东秦岭成矿带、太行恒山成矿带、鲁东成矿区、湘东北成矿区及东南沿海成矿带 ,前两个是主要成矿带     

祁连和秦岭地区寒武纪和奥陶纪古生物区系关系的探讨

我国西北地区由不同地体组成,构造运动复杂。由于缺乏充分的古生物学证据,古生物区系的识别和归属一直是有待解决的问题。本文在前人工作的基础上,依据各类动物群特征的分析,较详细地探讨了我国祁连和秦岭地区相关地层区中-晚寒武世和奥陶纪动物群的性质及其古生物类型的归属,确定了过渡型动物群在祁连和秦岭地区的大体分布范围。同时,结合地球动力学和古地理学研究成果的分析,探讨了导致在祁连和秦岭地区中-晚寒武世和奥陶纪时存在着与华南相似过渡类型动物群的两种可能原因。一种可能是中-晚寒武世和奥陶纪时塔里木板块位于扬子板块西边,中朝板块位于扬子板块之北,祁连和秦岭可能位于扬子和塔里木板块之间,存在与华南及华北动物群交流的基本条件,产生了大体相近的动物群。另一种可能是中-晚寒武世和奥陶纪时祁连和秦岭地区存在一些原位于扬子板块北部边缘的地体,在这些沿扬子板块北缘分布的地体上发育了与南部边缘相似的生物群或生物类型。中生代之前,沿扬子板块主体和北部边缘地体之间的走滑活动,可能使扬子板块主体向东移动了几百公里,而其边缘那些属于祁连和秦岭的地体向东移动的幅度不大,从而造成现今祁连和秦岭地区存在与扬子板块东南部地区大体相似的具过渡性质的生物群或生物类型,而扬子板块北部边缘又缺少边缘过渡相带的现状。     

闽西南地区大地构造演化和矿床时空分布规律

在充分吸收前人工作成果的基础上,讨论了闽西南地区的主要矿床类型及其特征,将闽西南地区的矿床划分为三个矿床成矿系列:晋宁期与海相火山作用有关的铅、锌、银多金属块状硫化物矿床成矿系列;海西-印支期与火成岩有关的铁、铜、铅、锌多金属矿床成矿系列;燕山期与中酸性火成岩有关的铁、铜、铅、锌、钼、钨、锡、金、银、铀等多金属矿床成矿系列。其中,与燕山期有关的矿床成矿系列可进一步划分为侏罗纪早期与壳幔混合源I型花岗闪长岩有关的铁、铜、铅、锌矿床成矿亚系列;侏罗纪晚期与壳源S型花岗质岩体有关的钨、锡、钼、铋多金属矿床成矿亚系列;早白垩世与壳源型中酸性侵入岩有关的层控矽卡岩型铁、铜、铅、锌、钼多金属矿床成矿亚系列;早白垩世与壳幔混合源型中酸性侵入岩-次火山作用有关的金、银、铜、钼、铅、锌、铀等多金属矿床成矿亚系列。总结研究提出了各成矿(亚)系列的形成背景、时空分布规律,初步认为晋宁期VMS型多金属矿床形成于华南联合陆块拉张裂解形成的政和-大埔海底双峰式火山盆地环境,海西-印支期岩浆热液-斑岩型金属矿床形成于陆内伸展与挤压环境交替出现的岩浆侵入过程中,而燕山期成矿(亚)系列则形成于太平洋构造域时期的陆内伸展与挤压环境交替出现的岩浆侵入与火山喷发的过程中。