Room temperature solid-state detectors for Gamma ray burst spectroscopy

We have evaluated several solid state detectors which offer excellent energy resolution at room temperature for soft X-rays. For soft X-rays (< 1 keV to 20 keV), silicon P-intrinsic-N (PIN) and avalanche-mode photodiodes (APD's) have been studied. Using commercially available charge sensitive pre-amplifiers, these photodiodes provide 1 keV resolution without cooling. Their detection efficiencies are limited to about 20 keV and 15 keV, respectively. To overcome this constraint, we have studied thick (1.5 mm) PIN detectors made by Micron Semiconductor Ltd., U.K., as well as compound semiconducting materials with high Z constituents such as CZT and PbI₂. PbI₂ allows high detection efficiencies of photons up to 100 keV with detectors 100–300 microns thick. These new detectors offer the capability to study the low-energy spectral evolution of Gamma ray bursts (GRBs). A matrix of these detectors could be used as an image plane detector with moderate spatial resolution for imaging.     

Bayesian Spatial Modelling of Gamma Ray Count Data

Gamma ray logging is a method routinely employed by geophysicists and environmental engineers in site geology evaluations. Modelling of gamma ray data from individual boreholes assists in the local identification of major lithological changes; modelling these data from a network of boreholes assists with lithological mapping and spatial stratigraphic correlation. In this paper we employ Bayesian spatial partition models to analyse gamma ray data spatially. In particular, a spatial partition is defined via a Voronoi tessellation and the mean intensity is assumed constant in each cell of the partition. The number of vertices generating the tessellation as well as the locations of vertices are assumed unknown, and uncertainty about these quantities is described via a hierarchical prior distribution. We describe the advantages of the spatial partition modelling approach in the context of smoothing gamma ray count data and describe an implementation that may be extended to the fitting of a more general model than a constant mean within each cell of the partition. As an illustration of the methodology we consider a data set collected from a network of eight boreholes, which is part of a geophysical study to assist in mapping the lithology of a site. Gamma ray logs are linked with geological information from cores and the spatial analysis of log data assists with predicting the lithology at unsampled locations.     

A traveltime reciprocity discrepancy in the Podvin & Lecomte time3d finite difference algorithm

We have found that the extensively used finite difference scheme time3d produces time fields which are 'asymmetric' in the sense that traveltimes computed to the right of the source are faster than traveltimes computed to the left. All finite difference schemes will, as they are approximations to the wave equation, to some extent fail to obey reciprocity perfectly. We show, however, that the errors in time3d may be significant—and unnecessarily large. An asymmetry in the point source initialization has been identified, and after correction time3d produces time fields with an improved reciprocity.     

下庄铀矿田337矿床成矿流体稀土元素示踪

337铀矿床位于下庄矿田东缘,区内发育近EW向、NNE向构造裂隙群及NW向辉绿岩和正长岩脉体,发育以碱性为主的多种围岩蚀变。区内矿床主要赋矿围岩的稀土元素特征属壳源型。矿石内金属矿物以沥青铀矿为主,矿石的LREE/HREE比值为3.25,Sm/Nd比值平均为0.307,Ce/Yb比值为7.127,这些数据都显示出成矿流体具有较深来源。矿石较围岩亏损稀土元素尤其是轻稀土元素,稀土元素分布模式平缓,与幔源辉绿岩特别是与正长岩的稀土元素分布模式相近,负铕异常比围岩更为强烈,反映成矿流体的来源具有幔源性。结合区域地质特征,可以认为337矿床成矿流体来源具有幔源性质。     

基于DSM阴影仿真和高度场光线跟踪的影像阴影检测

介绍了一个建筑物阴影检测的模型。首先利用摄影测量学原理来计算阴影坐标。即用数字表面模型(digitalsurfacemodel,缩写为DSM)和太阳高度和方位来计算建筑物阴影的空间坐标,并由相机模型计算出每个阴影单元对应的扫描行和相机空间坐标。由高度场光线跟踪判断阴影的可见性,对可见阴影计算出它在投影图像上的坐标。然后在这个结果的基础上再对图像进行阴影的细分割。     

冲积平原区土壤元素组成特征及其示踪作用

应用土壤元素组成特征研究基础地质问题是覆盖区多目标地球化学调查工作后项重要任务。通过对珠江三角洲，江汉平原，成都盆地3个冲积平原区土壤元素组成特征的研究，探讨了其对土壤成壤母质特性的示踪作用，为今后开展类似的研究工作提供了一种思路。     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。