北部湾三维潮流场数值研究(英文)

本文对北部湾三维潮波进行了数值研究,并将所得结果与现有观测资料作了比较。通过比较发现两者相当一致。文中还绘制了M_2和K_1分潮的同潮图,并对其作了讨论。可以断定,北部湾的日潮优势是由日潮共振所引起的。M_2和K_1分潮流的水平分布表明,强流区位于它们各自的蜕化无潮点附近。还讨论了分潮流的铅直结构,可以看出这种结构十分接近实际分潮流场的特征。     

The Levant Slumps and the Phoenician Structures: collapse features along the continental margin of the southeastern Mediterranean Sea

Two distinct series of slumps deform the upper part of the sedimentary sequence along the continental margin of the Levant. One series is found along the base of the continental slope, where it overlies the disrupted eastern edge of the Messinian evaporites. The second series of slumps transects the continental margin from the shelf break to the Levant Basin. It seemed that the two series were triggered by two unrelated, though contemporaneous, processes. The shore-parallel slumps were initiated by basinwards flow of the Messinian salt, that carried along the overlying Plio-Quaternary sediments. Seawater that percolated along the detachment faults dissolved the underlying salt to form distinctly disrupted structures. The slope-normal slumps are located on top of large canyons that cut into the pre-Messinian sedimentary rocks. A layer of salt is found in the canyons, and the Plio-Quaternary sediments were deposited on that layer. The slumps are bounded by large, NW-trending faults where post-Messinian faulted offset was measured. We presume that the flow of the salt in the canyons also drives the slope-normal slumps. Thus thin-skinned halokynetic processes generated the composite post-Tortonian structural patterns of the Levant margin. The Phoenician Structures are a prime example of the collapse of a distal continental margin due to the dissolution of a massive salt layer.     

珠江口东南近海海区污损生物研究

为研究珠江口东南近海海区污损生物状况,于1986年5月至1987年6月,在香港东南约114和160km,水深为95和113m处布设了两个生物浮标站,并对距香港约172km,水深为115m处的Marex水文气象浮标上的污损生物群落进行调查.此次调查共采集和鉴定出污损生物78种,其中在浸海只有3个月的试板上,主要有柄蔓足类、水螅和藻类,优势种是细板条茗荷、茗荷和直杯螅.至于浸海时间达6～12个月的浮标(包括沉标)及锚链系统,其上还有相当数量的多种双壳类软体动物、无柄蔓足类和苔藓动物等硬性污损生物附着.在种类垂直分布方面,污损生物群落组成随深度发生明显变化.     

冲绳海槽至马里亚纳海沟重力异常和地壳结构的初步研究

根据我们实测的水深、重力连续剖面资料,计算了自东海至北斐济盆地的地壳厚度。本文旨在对冲绳海槽至马里亚纳海沟的重力异常和地壳结构进行初步的研究。该地段位于太平洋板块俯冲带以西,构造活动十分复杂、剧烈,并含有多种类型的地壳结构。     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

The Vema Transverse Ridge (Central Atlantic)

Transverse ridges are elongate reliefs running parallel and adjacent to transform/fracture zones offsetting mid-ocean ridges. A major transverse ridge runs adjacent to the Vema transform (Central Atlantic), that offsets the Mid-Atlantic Ridge by 320 km. Multibeam morphobathymetric coverage of the entire Vema Transverse ridge shows it is an elongated (300 km), narrow (<30 km at the base) relief that constitutes a topographic anomaly rising up to 4 km above the predicted thermal contraction level. Morphology and lithology suggest that the Vema Transverse ridge is an uplifted sliver of oceanic lithosphere. Topographic and lithological asymmetry indicate that the transverse ridge was formed by flexure of a lithospheric sliver, uncoupled on its northern side by the transform fault. The transverse ridge can be subdivided in segments bound by topographic discontinuities that are probably fault-controlled, suggesting some differential uplift and/or tilting of the different segments. Two of the segments are capped by shallow water carbonate platforms, that formed about 3–4 m.y. ago, at which time the crust of the transverse ridge was close to sea level. Sampling by submersible and dredging indicates that a relatively undisturbed section of oceanic lithosphere is exposed on the northern slope of the transverse ridge. Preliminary studies of mantle-derived ultramafic rocks from this section suggest temporal variations in mantle composition. An inactive fracture zone scarp (Lema fracture zone) was mapped south of the Vema Transverse ridge. Based on morphology, a fossil RTI was identified about 80 km west of the presently active RTI, suggesting that a ridge jump might have occurred about 2.2 m.a. Most probable causes for the formation of the Vema Transverse ridge are vertical motions of lithospheric slivers due to small changes in the direction of spreading of the plates bordering the Vema Fracture Zone.     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

Harmonic generation past a submerged porous step

Experiments were conducted in a wave flume to study the differences between harmonic evolution of monochromatic waves as they propagate over a submerged impermeable or porous step under non-breaking conditions. Results are used as a preliminary analysis to establish some engineering design criteria on harmonic generation on submerged porous structures. The root-mean-squared wave height evolution is also studied and compared to linear models as a first approximation. It is shown that porous structure increases the effective relative depth and decreases the relative wave height, resulting in a lower Ursell number and a lower chance to generate harmonics. The effective water depth over a step as defined in the paper, provides information to evaluate the potential harmonic generation.     

近海污损生物的调查方法

近海海区污损生物调查有浮标挂板法和海上设施（浮标及其锚碇系统，Ｍａｒｅｘ水文浮标，移动式钻井平台和固定式生产平台）采样法。由于近海海区污损生物调查工作的特殊性和艰难性，笔者提出了利用已有的海上设施，尤其是固定式平台来积累近海污损生物资料，以便进行生态学研究。