基于抗转模型的颗粒材料宏−细观关系研究

接触模型的宏?细观参数标定是成功使用离散元方法的关键。在离散元的接触模型中线性接触模型与抗转线性接触模型均可用于模拟砂性土的力学行为,其中抗转线性接触模型在模拟密砂的剪胀性方面具备优势。采用抗转线性接触模型对室内密实砂土三轴试验进行了离散元模拟,验证了抗转线性接触模型的可靠性;进而系统分析了颗粒间摩擦系数、刚度比和抗转动系数等细观参数与砂土峰值内摩擦角、残余内摩擦角、峰值剪胀角等宏观参数的相关关系并进行了验证;揭示了偏应力作用下,细观参数对密实砂土试样内部剪切带宽度与倾角变化的影响规律,提出了考虑剪胀角的剪切带倾角经验公式。通过研究建立了抗转线性接触模型宏?细观参数的量化关系并给出了标定参数的具体流程图,提出了快速标定宏观参数的方法并应用实例进行了验证,为采用抗转线性接触模型精准模拟密实砂土的力学特性提供依据。     

基于声波测试法对鹰滩页岩各向异性分析

页岩储层通常呈薄层状结构,一般认为其岩石力学参数具有横向各向同性,而其各向异性受围压（CP）、含水率和总有机质含量（TOC）等多种因素的影响。本文对不同围压下的鹰滩（Eagle Ford）页岩进行超声波波速进行测试实验,研究围压对鹰滩页岩波速及岩石力学各向异性的影响。实验结果表明,鹰滩页岩属于弱各向异性多孔介质,并具有横向各向同性、垂向各向异性的性质。纵波（P波）和横波（S波）波速随围压的增大而增大,特别是在低围压范围内增幅显著,同时围压增大会降低纵波和横波的各向异性,纵波各向异性比横波各向异性对围压更敏感。对鹰滩页岩各向异性分析为页岩储层压裂过程中裂缝的起裂和延伸规律研究提供了必要的力学参数。     

大直径深层钻孔灌注桩拔除工艺研究

结合郑州南站连接线明挖隧道（拔桩区间）拟拔桩基直径大、桩长的特点,对桩体受力特征和拔桩工艺进行了研究。通过拔桩过程中桩周土破坏模式和桩体自身的抗拉强度分析计算,选取有效的减阻方法并应用于工程实践,取得良好效果。最后总结出大直径深层钻孔灌注桩拔除工程中桩身局部扩大、桩侧摩阻力过大和断桩等问题及相应的解决方法,供今后类似工程借鉴。     

ISO2394:2015 Annex D (Reliability of Geotechnical Structures)

ISO2394:2015 contains a new informative Annex D on “Reliability of Geotechnical Structures”. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process, while respecting the diversity of geotechnical engineering practice. This paper highlights the main features of Annex D and gaps for future work.     

接地电阻随季节及天气过程变化规律分析

为了解框架结构建筑物基础接地电阻的季节变化特征及天气过程对其变化的影响,分析了2010年广州从化气象局框架建筑物基础接地电阻和相关气象要素的自动气象站观测资料。从季节变化特征来看,框架结构接地电阻相对较为稳定,月平均值2月最大为0.78 Ω,9月份最小为0.57 Ω,全年变化最大值约为0.21 Ω。统计季节变化曲线和暴雨过程发现,接地体电阻与1.5 m土壤温度和1.0 m土壤含水量呈现明显的负相关,接地电阻减小值与暴雨的强度无明显的相关性。文中还对较长时间无降水的干旱过程进行了分析,结果表明：干旱时框架结构接地电阻值有明显的上升趋势,尤其在夏季,干旱对接地电阻影响较大。     

A simple parameterization of bulk canopy resistance from climatic variables for estimating hourly evapotranspiration

This paper examines a model for estimating canopy resistance r_c and reference evapotranspiration ET_o on an hourly basis. The experimental data refer to grass at two sites in Spain with semiarid and windy conditions in a typical Mediterranean climate. Measured hourly ET_o values were obtained over grass during a 4 year period between 1997 and 2000 using a weighing lysimeter (Zaragoza, northeastern Spain) and an eddy covariance system (Córdoba, southern Spain). The present model is based on the Penman–Monteith (PM) approach, but incorporates a variable canopy resistance r_c as an empirical function of the square root of a climatic resistance r* that depends on climatic variables. Values for the variable r_c were also computed according to two other approaches: with the r_c variable as a straight‐line function of r* (Katerji and Perrier, 1983, Agronomie 3 (6): 513–521) and as a mechanistic function of weather variables as proposed by Todorovic (1999, Journal of Irrigation and Drainage Engineering, ASCE 125 (5): 235–245). In the proposed model, the results show that r_c/r_a (where r_a is the aerodynamic resistance) presents a dependence on the square root of r*/r_a, as the best approach with empirically derived global parameters. When estimating hourly ET_o values, we compared the performance of the PM equation using those estimated variable r_c values with the PM equation as proposed by the Food and Agriculture Organization, with a constant r_c = 70 s m^?1. The results confirmed the relative robustness of the PM method with constant r_c, but also revealed a tendency to underestimate the measured values when ET_o is high. Under the semiarid conditions of the two experimental sites, slightly better estimates of ET_o were obtained when an estimated variable r_c was used. Although the improvement was limited, the best estimates were provided by the Todorovic and the proposed methods. The proposed approach for r_c as a function of the square root of r* may be considered as an alternative for modelling r_c, since the results suggest that the global coefficients of this locally calibrated relationship might be generalized to other climatic regions. It may also be useful to incorporate the effects of variable canopy resistances into other climatic and hydrological models. Copyright © 2005 John Wiley & Sons, Ltd.     

冀中坳陷下第三系构造背斜成因分类

冀中坳陷的下第三系构造背斜主要形成于伸展断陷背景下 ,与正断层系统联系紧密。根据背斜与断层关系 ,基本类型可分为 3种 ,即纵向、横向和复合背斜 ;根据具体构造力学背景 ,这 3种背斜可进一步分为 8类 ,即 :重力滑动型、张扭型、拆离拱张型、逆牵引型、断层线偏转型、侧接型、复杂变换型、复合型。这些背斜是构造演化的产物 ,在一定程度上指示了坳陷内的构造演化规律 ,同时又是形成油气藏的有利圈闭 ,目前已取得显著勘探成效     

Estimating evapotranspiration for a temperate salt marsh,Newcastle, Australia

Evapotranspiration was studied at a salt marsh site in the Hunter River estuary, NSW, Australia, during 1996–8. Estimates of actual evapotranspiration (E_a) were obtained for three sites using the eddy correlation method. These values were compared with results obtained with the Penman and Penman–Monteith equations, and with pan evaporation. The Penman–Monteith method was found to be most reliable in estimating daily and hourly evapotranspiration. Surface resistance values averaging 12 s m^?1 were derived from the eddy correlation estimates. Recent tidal flooding and rainfall were found to decrease surface resistance and increase E_a/E_p ratios. Estimates of evapotranspiration obtained using the Penman–Monteith method were shown to be sensitive to changes in surface resistance, canopy height and the method used to estimate net radiation from incoming solar radiation. These results underline the importance of accurately estimating such parameters based on site‐specific data rather than relying on empirical equations, which are derived primarily for crops and forests. Copyright © 2001 John Wiley & Sons, Ltd.     

Flux–Profile Relationships Over a Fetch Limited Beech Forest

The influence of an internal boundary layer and a roughness sublayer on flux–profile relationships for momentum and sensible heat have been investigated for a closed beech forest canopy with limited fetch conditions. The influence was quantified by derivation of local scaling functions for sensible heat flux and momentum (_h and _m) and analysed as a function of atmospheric stability and fetch. For heat, the influences of the roughness sublayer and the internal boundary layer were in agreement with previous studies. For momentum, the strong vertical gradient of the flow just above the canopy top for some wind sectors led to an increase in _m, a feature that has not previously been observed. For a fetch of 500 m over the beech forest during neutral atmospheric conditions, there is no height range at the site where profiles can be expected to be logarithmic with respect to the local surface. The different influence of the roughness sublayer on _h and _m is reflected in the aerodynamic resistance for the site. The aerodynamic resistance for sensible heat is considerably smaller than the corresponding value for momentum.