道路工程平面坐标系的统一性理论研究

传统上道路工程勘测、设计、施工各单位统一采用以初测导线点处垂线为基准线、水准面为基准面的,把各相邻测站处局部水准面相连拼接成一个统一带状的平面坐标系统（定义为道路工程渐变平面坐标系）。本文提出顾及地球重力场模型,用GPS直接建立垂线和水准面系统的道路工程渐变平面坐标系的解决方案,从理论上统一了勘测坐标系（GPS平面坐标系）和设计、施工坐标系（道路工程渐变平面坐标系）,消除了其间存在的系统误差。     

道路网增量更新中拓扑冲突的检测方法

为提高空间数据增量更新中拓扑冲突的检测效率,针对道路网数据,首先分析了增量要素进行更新时可能产生的拓扑冲突的类型和特点,运用规则格网进行邻近区域的表达;然后使用5元组模型描述增量要素与邻近区域要素间的拓扑关系,与设定的拓扑冲突表达进行比较,判断是否存在拓扑冲突。实验结果表明,本方法对于道路网数据增量更新中的拓扑冲突的类型区分准确全面,检测效率较高,具有很好的实用性和可靠性。     

Chloride source delineation in an urban-agricultural watershed: Deicing agents versus agricultural contributions

Analyses (n = 525) of chloride (Cl⁻), bromide (Br⁻), nitrate as nitrogen (NO₃-N), sodium (Na⁺), calcium (Ca²⁺) and potassium (K⁺) in stream water, tile-drain water and groundwater were conducted in an urban-agricultural watershed (10% urban/impervious, 87% agriculture) to explore potential differences in the signature of Cl⁻ originating from an urban source as compared with an agricultural source. Only during winter recharge events did measured Cl⁻ concentrations exceed the 230 mg/L chronic threshold. At base flow, nearly all surface water and tile water samples had Cl⁻ concentrations above the calculated background threshold of 18 mg/L. Mann–Whitney U tests revealed ratios of Cl⁻ to Br⁻ (p = .045), to NO₃-N (p < .0001), to Ca²⁺ (p < .0001), and to Na⁺ (p < .0001) to be significantly different between urban and agricultural waters. While Cl⁻ ratios indicate that road salt was the dominant source of Cl⁻ in the watershed, potassium chloride fertilizer contributed as an important secondary source. Deicing in watersheds where urban land use is minimal had a profound impact on Cl⁻ dynamics; however, agricultural practices contributed Cl⁻ year-round, elevating stream base flow Cl⁻ concentrations above the background level.     

基于粒子滤波的行车轨迹路网匹配方法

行车轨迹是一种时间序列的地理空间位置采样数据,而传统的轨迹—路网匹配方法主要以全局或局部寻优的方式建立轨迹—路网匹配关系,影响了时空场景中数据的匹配计算过程的相对独立性。针对这个问题,本文基于粒子滤波（Particle Filter,PF）原理建立行车轨迹与道路网络之间的匹配关系。首先,沿轨迹中车辆运动方向在道路网络中搜索邻近道路节点,在与道路节点拓扑邻接的道路弧段上初始化随机生成粒子,根据轨迹中车辆运动模型将粒子沿所在道路弧段移动;然后,基于PF原理计算各时刻粒子运动状态及与行车轨迹采样点之间的距离误差,根据高斯概率密度函数计算粒子权重并利用随机重采样方法进行粒子重采样,迭代更新粒子运动状态;最后,计算与搜索到的道路节点拓扑邻接的每条道路弧段中累计粒子权重,通过各道路弧段累计权重计算轨迹—路网匹配关系。以行车轨迹进行实验表明,利用本文方法可以通过粒子时空变化反映采样点的移动,行车轨迹—路网匹配结果的正确率大于85%,能够实现行车轨迹和路网的准确匹配。     

基于语义规则的高分辨率影像道路交叉口提取方法

为了准确提取遥感影像上道路交叉口目标,提出一种利用特征语义规则从高分辨率影像上提取道路交叉口的方法。该算法构建交叉口模型时将其视为由同质区域像素集合及区域轮廓边界构成的面对象,提取过程分为两步:1)利用辐射、纹理特征语义匹配提取交叉口候选区域;2)通过几何特征语义匹配筛选候选区域、识别交叉口属性。利用多源遥感影像对算法正确性及合理性进行验证,结果表明:算法能准确、完整地提取道路交叉口,可为影像道路网构建提供辅助信息。     

A Comparative Study of Various Supervised Learning Approaches to Selective Omission in a Road Network

Selective omission is necessary for road network generalisation. This study investigates the use of supervised learning approaches for selective omission in a road network. To be specific, at first, the properties to measure the importance of a road in the network are viewed as input attributes, and the decision of such a road is retained or not at a specific scale is viewed as an output class; then, a number of samples with known input and output are used to train a classifier; finally, this classifier can be used to determine whether other roads to be retained or not. In this study, a total of nine supervised learning approaches, i.e., ID3, C4·5, CRT, Random Tree, support vector machine (SVM), naive Bayes (NB), K-nearest neighbour (KNN), multilayer perception (MP) and binary logistic regression (BLR), are applied to three road networks for selective omission. The performances of these approaches are evaluated by both quantitative assessment and visual inception. Results show that: (1) in most cases, these approaches are effective and their classification accuracy is between 70% and 90%; (2) most of these approaches have similar performances, and they do not have any statistically significant difference; (3) but sometimes, ID3 and BLR performs significantly better than NB and SVM; NB and KNN perform significantly worse than MP, SVM and BLR.     

基于蚁群算法的道路选取模型研究

在制图综合中,道路选取是非常重要的内容之一,研究道路选取的智能化方法是非常必要的。文中在研究道路语义、几何特征、拓扑关系和结构特征的基础上,充分考虑居民点对道路选取过程的影响,建立道路选取的蚁群算法模型。通过实验证明该模型算法的可行性和有效性。     

粗精匹配结合的矢量道路辅助惯性导航算法

针对无源环境下无法采用卫星导航定位方式对惯性导航系统的累积误差进行修正的问题,提出一种采用高精度的矢量道路数据进行粗精匹配的导航校正算法。该方法首先通过分析惯导轨迹的特征标示点以及外接矩形,剔除明显的误匹配道路和冗余道路,获取待匹配道路集合;进而,结合ICCP算法具有匹配精度较高,匹配结果较稳定的优点,完成惯导轨迹位置误差的补偿和校正;最后,根据匹配方差和历史匹配轨迹对匹配结果的准确性进行分析和判断。仿真实验结果表明,该算法能够提高惯性导航定位误差的校正精度,减少在复杂道路交叉口等情况的误匹配。     

小比例尺道路网眼约束下的多尺度道路网自动匹配

针对道路网多尺度匹配的问题,提出了一种在小比例尺数据道路网眼约束下的多尺度道路匹配方法。首先,构建两幅不同比例尺数据的道路网眼;其次,在小比例尺道路网眼的约束下,提取出大比例尺道路中由若干道路网眼构成的复合网眼,并完成与小比例尺道路网眼具有多对一和一对一关系的网眼匹配;然后,实现不同比例尺道路网眼的多对多匹配;最后,由复合网眼与小比例尺道路网眼的匹配关系转化为多比例尺道路网眼边界道路之间的匹配和内部道路之间的匹配,完成整个道路网的匹配。试验结果证明,本方法能较好地实现多尺度道路网的匹配。     

Road condition assessment by OBIA and feature selection techniques using very high-resolution WorldView-2 imagery

Accurate information on the conditions of road asphalt is necessary for economic development and transportation management. In this study, object-based image analysis (OBIA) rule-sets are proposed based on feature selection technique to extract road asphalt conditions (good and poor) using WorldView-2 (WV-2) satellite data. Different feature selection techniques, including support vector machine (SVM), random forest (RF) and chi-square (CHI) are evaluated to indicate the most effective algorithm to identify the best set of OBIA attributes (spatial, spectral, textural and colour). The chi-square algorithm outperformed SVM and RF techniques. The classification result based on CHI algorithm achieved an overall accuracy of 83.19% for the training image (first site). Furthermore, the proposed model was used to examine its performance in different areas; and it achieved accuracy levels of 83.44, 87.80 and 80.26% for the different selected areas. Therefore, the selected method can be potentially useful for detecting road conditions based on WV-2 images.