A stepwise method for determining the number of component distributions in a mixture

This paper considers the problem of estimatingm, the number of components in a finite mixture of distributions from a parametric family. A step-up procedure using the bootstrap method is proposed. Some properties of the procedure are illustrated with simulation studies. An example of the method, applied to orientation of beach clasts, is given.     

天文学研究发展趋势分析--恒星与恒星系统

对在1981-2000年世界上所发表的和中国学者所发表的有关恒星与恒星系统的论文作统计发现：此期间世界上这一领域的发展较平稳，而我国的发展快速．这反映了改革开放后，我国基础学科研究大有进展．从各分支所占的比重和发展来看，我国在恒星与恒星系统的研究与世界同期有几乎相同的分布，因此总体上我国在这一领域的发展基本正常．当然有些分支发展较快，如有关超新星及其遗迹、星际介质和恒星形成区、化学丰度的研究等，这和一些较强的研究团组形成有关；在双星研究方面，我国则与世界发展一致，双星研究始终是恒星研究领域的重点；而在世界范围内较突出的关于银河系的研究，在我国却相对较弱．恒星和恒星系统这一研究领域20年的论文数统计显示，我国学者所发表的论文只占世界总论文数的1．3％，虽然在最后5年有大幅上升，但也只占2．0％，这与我国IAU会员数所占比例相比是偏少的．就世界整体而言，恒星领域的研究进展与整个天文学领域相比是较慢的，显然这与一批能做深空探测和高能波段观测的设备投入有关．因此，除了对恒星及恒星系统领域作统计分析外，对整个天文学领域各大分支作分析可能对制定今后我国天文学发展计划更有利。     

Study on numerical simulation to water lowering in an open coal mine digging

In view of the situation of excavation of open coal mine for the underground water disaster,we should carry out simulation studies for the numerical value of the water lowering project and improve the accuracy and the level of the water lowering project.On the basis of the hydrological geological conditions of certain open mine digging,a more reasonable seepage numerical model was built according to MODFLOW.It was simulated in advance that the process of the confined water level descending with the time,and combining with the actual observations to test the correctness of the model.The calculation showed that the results coincided well with the results of actual measurement.Based on this,different water lowering numerical simulations were built for the open coal mine digging.It could be simulated and forecast that the changes of the groundwater level in drainage process within and outside the mine pit,and it was quantitatively assessed that the possible water lowering result of the opencast water drainage process,which provide an important basis for the actual water lowering project and the possible project disposal.     

GPS中BOC调制的FPGA实现

GPS系统中提出了一种新的信号形式,二进制偏移载波(BOC)调制是这种新的信号形式产生的技术关键。首先介绍了BOC调制的定义及其频谱特性,然后阐述了基于FPGA(现场可编程门阵列)硬件平台的BOC调制实现方法,并给出了仿真波形。结果表明,该实现方法是值得提倡的。     

基于专家系统决策的多模式控制及其应用

将专家系统技术与常规控制、模糊控制、超前控制、仿人智能操作控制以及计算机控制技术相结合,设计了一种新的基于专家系统决策的多模式控制(MCDBES)。经试验和实际运行结果表明,MCDBES系统对未知数学模型的被控对象,具有良好的控制性能。本文提出的MCDBES已成功地应用于燃油陶瓷窑炉计算机控制系统。     

简单分段法在地层划分中的应用

本文简介海南省1:5万坝王岭、猴狝岭幅区域地质调查的地球化学简单分段法在地层划分中的应用。根据对下古生界变质岩与白垩系红层两条地层实测剖面的地球化学资料整理,用简单分段法进行划分、其效果较好。它的地球化学组分基本能反映原始沉积物的特点和其沉积环境,且与岩石地层的划分相互印证。     

Upscaling of elastic properties for large scale geomechanical simulations

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.