A DEVICE FOR MEASURING GULLY HEADWALL MORPHOLOGY

This paper describes a low-cost device for measuring the three-dimensional morphology of a gully headwall. The device was designed to operate in a gully system with the following characteristics: overhanging banks caused by a thick, dense root mat; retreat of the underlying unconsolidated sediments through small slab failures, leading to a considerable variation in retreat rate at each point on the headwall; and changes in the orientation of the headwall owing to changes in sediment properties and the topographical and hydrological controls of gully growth. The device is used to measure a series of closely spaced vertical profiles of the headwall, and the collected data are combined to draw a contour map showing the distance from the plane of the instrument to the headwall. Comparing maps for sequential times enables retreat rates for the diffferent proportions of the headwall to be quantified.     

极化SAR目标相对最优极化研究

目标相对最优极化就是选取一种极化状态,使得研究目标和背景地物的接收功率对比达到最大。通过讨论了目标相对最优极化问题,提出了改进的模型和解算方法,利用实际数据对其模型和方法进行了实验,验证了其有效性和正确性。     

基于D-InSAR技术的金沙江地区滑坡形变监测与分析

滑坡是发生在我国山区的主要地质灾害类型,金沙江地区由于地势较高、地形复杂、多云多雨的特点,给传统的滑坡监测增加了难度。合成孔径雷达差分干涉测量技术(Differential interferometry synthetic aperture radar,D-InSAR)已在滑坡地面沉降监测中得到了广泛应用。本文选取金沙江上游沿岸作为研究区域,基于2018年8月11日与9月28日的Sentinel-1A影像及SRTM1数据,利用GAMMA软件及D-InSAR技术监测到金沙江地区的地表形变,成功识别出金沙江右岸的一处滑坡灾害。研究结果显示,在此滑坡的坡顶部分出现了约2.5 cm的沉降,而在坡底部分由于崩塌物的累积,地面出现了约3 cm的抬升。从实验结果可以得出,InSAR技术是一种有效的滑坡变形监测手段,利用Sentinel-1A卫星的SAR数据对滑坡区域进行形变监测,可以得到较好的干涉结果。     

基于一维综合孔径微波辐射计的海面温度反演研究

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.     

Transition Periods Between Sea Ice Concentration and Sea Surface Air Temperature in the Arctic Revealed by an Abnormal Running Correlation

This study used the synthetic running correlation coefficient calculation method to calculate the running correlation coefficients between the daily sea ice concentration(SIC) and sea surface air temperature(SSAT) in the Beaufort-Chukchi-East Siberian-Laptev Sea(BCEL Sea), Kara Sea and southern Chukchi Sea, with an aim to understand and measure the seasonally occurring changes in the Arctic climate system. The similarities and differences among these three regions were also discussed. There are periods in spring and autumn when the changes in SIC and SSAT are not synchronized, which is a result of the seasonally occurring variation in the climate system. These periods are referred to as transition periods. Spring transition periods can be found in all three regions, and the start and end dates of these periods have advancing trends. The multiyear average duration of the spring transition periods in the BCEL Sea, Kara Sea and southern Chukchi Sea is 74 days, 57 days and 34 days, respectively. In autumn, transition periods exist in only the southern Chukchi Sea, with a multiyear average duration of only 16 days. Moreover, in the Kara Sea, positive correlation events can be found in some years, which are caused by weather time scale processes.     

一维综合孔径微波辐射计遥感海面温度的敏感性分析

一维综合孔径微波辐射计能够有效提高观测的空间分辨率,其观测入射角通常在0°~55°范围内变化。为了开发适用于一维综合孔径微波辐射计的海面温度反演算法,需要评估其观测亮温对海洋大气环境要素的敏感性。利用海面发射率模型和大气辐射传输模型,构建了适用于一维综合孔径微波辐射计的微波海洋大气辐射传输模式,研究了C波段垂直和水平极化微波辐射亮温在不同入射角下对海洋大气环境要素的敏感性变化情况,并定量计算了相应的敏感系数。结果表明:垂直和水平极化亮温对海洋大气环境要素的敏感性表现出不同的特性。随着入射角的增大,垂直极化亮温对海面温度的敏感性增强,对海面风场的敏感性相对减弱;水平极化亮温则相反。由大气水汽含量和云液态水含量误差引入的垂直和水平极化亮温误差随入射角增大而增大,但是,即使在55°的大入射角下垂直和水平极化亮温误差仍小于0.12 K。对于海面温度反演精度优于1 K的要求,一维综合孔径微波辐射计的测温精度需优于0.6 K。研究结果对于一维综合孔径微波辐射计海面温度反演算法的研究和载荷设计具有一定的理论指导意义。     

基于GF-3的不同极化方式SAR图像海面油膜识别的比较 ——以"桑吉"轮事故为例

基于我国自主研发的首颗分辨率达到1m的C频段多极化合成孔径雷达高分三号卫星(GF-3),通过典型溢油案例定性和定量地比较了双极化与单极化图像预处理性能,分析了不同的极化组合对海面油膜识别结果的影响。得出结论:同向极化与异向极化成像差异明显,VV极化明显比VH极化回波强度高,并且油膜识别度较高;相反,双极化VHVV方式与单极化VH方式图像效果区别不大,双极化方式并不能绝对性地提高地物识别度。     

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.     

Sentinel-1A SAR影像及其在矿区地面沉降监测中的应用研究

详细介绍了Sentinel-1A SAR影像数据的基本参数、工作模式、应用领域等。利用2016.11.09—2017.03.09的5景Sentinel-1A C波段SAR影像数据进行矿区地面沉降监测试验。基于SARscape利用双轨D-In SAR技术进行差分干涉处理,得到了研究区地面沉降分布图,直观地再现了研究区在2016.11.09—2017.03.09的沉降分布、沉降量级等。结果表明济宁某矿区在监测期间地面相对稳定,未有大面积和大量级的地面沉降发生,4个干涉对监测到的最大沉降都未超过3 cm。     

SAR image despeckling with a multilayer perceptron neural network

Speckle noise in synthetic-aperture radar (SAR) images severely hinders remote sensing applications; therefore, the appropriate removal of speckle noise is crucial. This paper elaborates on the multilayer perceptron (MLP) neural-network model for SAR image despeckling by using a time series of SAR images. Unlike other filtering methods that use only a single radar intensity image to derive their parameters and filter that single image, this method can be trained using archived images over an area of interest to self-learn the intensity characteristics of image patches and then adaptively determine the weights and thresholds by using a neural network for image despeckling. Several hidden layers are designed for feedforward network training, and back-propagation stochastic gradient descent is adopted to reduce the error between the target output and neural-network output. The parameters in the network are automatically updated in the training process. The greatest advantage of MLP is that once the despeckling parameters are determined, they can be used to process not only new images in the same area but also images in completely different locations. Tests with images from TerraSAR-X in selected areas indicated that MLP shows satisfactory performance with respect to noise reduction and edge preservation. The overall image quality obtained using MLP was markedly higher than that obtained using numerous other filters. In comparison with other recently developed filters, this method yields a slightly higher image quality, and it demonstrates the powerful capabilities of computer learning using SAR images, which indicate the promising prospect of applying MLP to SAR image despeckling.