热带西太平洋海域上层海洋热含量的CSEOF分析

基于月平均Argo温、盐度剖面、纬向风和Ni o3.4指数等资料,利用循环平稳经验正交函数(CSEOF)分解法、最大熵谱分析和相关分析等方法,研究了热带西太平洋海域上层(0—700m)海洋热含量的时空变化特征,并探讨了其年际变化的可能原因。结果表明,热带西太平洋海域上层海洋热含量距平场具有显著的东-西向反位相振荡,且这种振荡除了具有较明显的季节变化外,还存在着较强的准2a振荡。此外,热含量距平场还存在着负-正-负的三极式经向模态,该模态除了具有明显的季节变化外,还存在着显著的准4a振荡。进一步分析表明,热含量的准2a振荡与ENSO事件的发生有着非常密切的联系,并对赤道西太平洋纬向风异常有1—2月的滞后响应。     

SHADOWS合成孔径声纳系统及性能测试

与传统的侧扫声纳相比,合成孔径声纳系统具有全覆盖无遗漏扫测,测量范围大、速度快,图像分辨率高等优点。本文介绍我国引进第一套SHADOWS合成孔径声纳系统的技术性能,分析SHADOWS合成孔径声纳系统性能测试情况及实际测量中的应用价值,提出了存在的问题及其对策。     

Otway Continental Margin Transect: Crustal architecture from wide‐angle seismic profiling across Australia's southern margin

The Otway Basin in southeastern Australia formed on a triangular‐shaped area of extended continental lithosphere during two extensional episodes in Cretaceous to Miocene times. The extent of the offshore continental margin is highlighted by Seasat/Geosat satellite altimeter data. The crustal architecture and structural features across this southeast Australian margin have been interpreted from offshore‐onshore wide‐angle seismic profiling data along the Otway Continental Margin Transect extending from the onshore Lake Condah High, through the town of Portland, to the deep Southern Ocean. Along the Otway Continental Margin Transect, the onshore half‐graben geometry of Early Cretaceous deposition gives way offshore to a 5 km‐thick slope basin (P‐wave velocity 2.2–4.6 km/s) to at least 60 km from the shoreline. At 120 km from the nearest shore in a water depth of 4220 m, sonobuoy data indicate a 4–5 km sedimentary sequence overlying a 7 km thick basement above the Moho at 15 km depth. Major fault zones affect the thickness of basin sequences in the onshore area (Tartwaup Fault Zone and its southeast continuation) and at the seaward edge of the Mussel Platform (Mussel Fault). Upper crustal basement is interpreted to be attenuated and thinned Palaeozoic rocks of the Delamerian and Lachlan Orogens (intruded with Jurassic volcanics) that thin from 16 km onshore to about 3.5 km at 120 km from the nearest shore. Basement rocks comprise a 3 km section with velocity 5.5–5.7 km/s overlying a deeper basement unit with velocity 6.15–6.35 km/s. The Moho shallows from a depth of 30 km onshore to 15 km depth at 120 km from the nearest shore, and then to about 12 km in the deep ocean at the limits of the transect (water depth 5200 m). The continent‐ocean boundary is interpreted to be at a prominent topographic inflection point 170 km from shore at the bottom of the continental slope in 4800 m of water. P‐wave velocities in the lower crust are 6.4–6.8 km/s, overlying a thin transition zone to an upper mantle velocity of 8.05 km/s beneath the Moho. Outstandingly clear Moho reflections seen in deep‐marine profiling data at about 10.3 s two‐way time under the slope basin and continent‐ocean boundary place further strong controls on crustal thickness. There is no evidence of massive high velocity (>7 km/s) intrusives/underplate material in the lower crust nor any synrift or early post‐rift subaerial volcanics, indicating that the Otway continental margin can be considered a non‐volcanic margin, similar in many respects to some parts of the Atlantic Ocean margins e.g. the Nova Scotia ‐ Newfoundland margin off Canada and the Galicia Bank off the Iberian Peninsula. Using this analogue, the prominent gravity feature trending northwest‐southeast at the continent‐ocean boundary may indicate the presence of highly serpentinised mantle material beneath a thin crust, but this has yet to be tested by detailed work.     

PC机在控制金刚石合成工艺方面的应用

通过开发压机ＰＣ机的内在功能，编制合理的控制程序，改进了设备的工况，提高了金刚石合成工艺的控制精度。     

利用合成孔径雷达差分干涉测量技术监测伊朗Bam地震同震形变场

介绍了差分干涉测量的原理、差分干涉数据对的选取方法,以及三轨法差分干涉测量数据处理的流程.利用星载合成孔径雷达差分干涉(D-InSAR)测量技术和ENVISAT ASAR雷达数据对2003年12月26日伊朗Bam 6.5级地震引起的地表形变场进行了测量试验,成功地获取了Bam地震的蝴蝶状的同震形变场生成了地表形变的等值线图,并且根据相干图确定了地震造成破坏最严重的区域的位置、分布及面积.试验证明D-InSAR技术是地表形变测量和地震研究的一个强大和有效的工具.     

短期前兆综合异常方法在青藏高原北部地区的应用——以兴海地震为例

通过对青藏高原北部地区118个定点前兆台项资料的研究,提出了利用前兆台网提取前兆综合异常度指标的方法,包括空间综合度和时间综合度.利用前者来研究青藏高原北部地区强震前短期前兆异常的时空演化特征;利用后者来判定未来中强地震的发震时间.在空间综合异常度的研究中较好地解决了前兆台网分布不均匀引起的异常集中区与震中偏离的问题.作为实例给出了2000年9月12日青海省兴海Ms6.6地震前前兆异常的时间和空间综合异常度高值区存在扩散-向震中集中-发震-扩散的过程.     

Application of support vector machine to synthetic earthquake prediction

This paper introduces the method of support vector machine (SVM) into the field of synthetic earthquake pre-diction, which is a non-linear and complex seismogenic system. As an example, we apply this method to predict the largest annual magnitude for the North China area (30°E-42°E, 108°N-125°N) and the capital region (38°E-41.5°E, 114°N-120°N) on the basis of seismicity parameters and observed precursory data. The corresponding prediction rates for the North China area and the capital region are 64.1% and ...     

合成地震记录制作中的质量控制方法研究

合成地震记录制作中的质量控制将最终决定地震地质层位标定的精度,为此,在分析合成地震记录原理基础上,从三个环节对合成地震记录制作进行质量控制:①通过测井数据精确计算反射系数;②提取与地震资料频谱一致、波形和相位稳定的地震子波;③在获得高精度速度场的基础上,从波组、波形、振幅、频率和相位特征等方面进行匹配调整等,通过对各个环节的研究分析,提出了一整套行之有效的质量控制方法,提高合成地震记录的精度,达到层位标定对合成地震记录精度的要求.     

基于AHP和模糊综合评判的TBM施工风险评估

岩石隧洞建设中面临很大和众多的风险,利用TBM施工的深埋长隧洞受多种不确定因素影响,具有随机性和模糊性,目前的研究方法难以对其进行准确定量分析。通过深入分析影响TBM施工的风险因素,建立了TBM施工风险综合评价指标体系。基于风险影响因素的层次性,提出了TBM施工风险二级模糊综合评判计算模型,并利用层次分析法(AHP)确定各级因素权重,利用模糊集法确定隶属函数,划分了风险接受等级。以南水北调西线工程深埋长隧洞TBM施工为例,应用二级模糊综合评判计算模型对该工程TBM施工风险进行分析,计算结果表明,该方法是合理性实用的。其理论、方法、思路和结论可供同类工程借鉴。