四川盆地深部地壳结构——深地震反射剖面探测

四川盆地位于扬子地块的西北部,被褶皱构造带所围绕,受周缘构造带的侧向挤压作用,盆地卷入了多期次和多边界的构造变形,为开展盆山耦合作用及多边界、多期次构造叠加与复合关系的研究提供了不可多得的理想野外实验室.为揭示四川盆地地壳结构,本文通过对3条不同时间采集的深地震反射剖面数据进行拼接联线处理,获得跨越四川盆地的330 km深地震反射偏移成果剖面,揭示了四川盆地地壳上地幔细结构:沉积层从西北向东南逐渐变薄,在龙门山前沉积层厚度超过15 km,在华蓥山下沉积层减薄到~8 km,且褶皱变形形成华蓥山薄皮褶皱冲断带;莫霍面出现在13~15 s(双程走时),埋深约40~45 km;并发现从下地壳延伸至地幔的东南向的倾斜反射,从13 s向下延伸至18 s,结合四川盆地及其周边地区其他地球物理和地球化学花岗岩同位素年龄等资料,我们认为这些倾斜反射层是扬子克拉通地台西北缘发生的新元古代俯冲的遗迹.     

基于合成孔径雷达回波信号的海洋溢油监测方法研究

海洋油污染是各类海洋污染中最常见、分布面积最广且危害程度最大的污染之一。近年来,海洋特别是近海人类活动频繁,且随着海上运输和石油加工业的发展,油田井喷、钻井平台爆炸、船舶碰撞等所造成的溢油事故增多,因而,监测海洋溢油具有重要的经济和社会现实意义。研究采用MatLAB工具,通过图像预处理(图像校正和增强)、特征提取和神经网络识别等方法,对合成孔径雷达(SAR)海洋溢油图像进行处理,最终期望实现半自动区分SAR图像上各类目标,并进行多种神经网络方法效果比较。研究首先对SAR海洋溢油图像进行初步人工识别;然后进行图像预处理(几何校正、滤波处理等)和基于灰度共生矩阵的特征值计算;最后,借助神经网络方法对溢油区域和疑似溢油区域进行分类,输出分类处理后的图像。通过输出图像分析发现,神经网络能对SAR海洋溢油图像中溢油、海水、土地3类目标进行明确分类,且RBF神经网络模型精度高于BP神经网络。本文提出的半自动分类方法不仅能提高SAR图像处理效率,将分类目标扩充有溢油和非溢油扩充到溢油、海水、土地3类,提高图像处理的全面性,同时通过比较RBF和BP神经网络在SAR溢油图像分类上的具体优劣,有着较好实际意义。     

合成孔径雷达差分干涉测量（D-InSAR）技术在多年冻土区地表变形监测中的应用

多年冻土区地表变形严重影响着区域内生态环境和工程设施的稳定性。合成孔径雷达差分干涉测量（differential interferometric synthetic aperture radar, D-InSAR）技术作为一种新型的空间对地观测技术, 为多年冻土区地表变形监测提供了新方法。通过近20年的不断深入研究, 利用D-InSAR技术的多年冻土区地表变形监测取得了大量研究成果。首先介绍了D-InSAR技术测量地表变形的理论基础, 进而概述了D-InSAR技术在多年冻土区地表变形测量中的应用现状, 然后总结了D-InSAR测量过程中存在的关键问题及可能的解决方法。在此认识和分析的基础上, 对D-InSAR技术今后在多年冻土区地表变形监测中的发展方向进行了探讨, 以期为D-InSAR技术在多年冻土区地表变形监测中的推广应用和深入研究提供参考。     

利用控制点三维信息标定机载双天线干涉SAR参数

采用基于敏感度方程的方法,研究基于三维重建模型下的机载双天线干涉SAR系统的干涉参数定标问题.干涉参数定标是生成高精度数字高程模型的关键.本文修正了Madsen提出的干涉SAR三维重建的视向量正交分解算法,采用电磁波波前的球面波模型,加入了载机的姿态旋转,构建一种新的干涉SAR三维重建模型.利用各干涉参数对控制点三维信息的不同的敏感性,提出分别利用地面控制点三维信息,对各干涉参数进行定标.并利用中国科学院电子学研究所自主设计、研制的机载干涉SAR系统数据,进行定标处理实验验证.     

RESEARCH ON THE CHARACTERISTICS OF QUATERNARY ACTIVITIES OF SU-XI-CHANG FAULT

Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.     

基于星载SAR信号的TEC反演新方法

由于星载合成孔径雷达(SAR)系统工作于电离层之上,其信号不可避免地将受到电离层的影响. 背景电离层以及电离层电子密度不规则体多重散射效应可引起距离向图像质量的下降, 在强起伏情况下, 多重散射效应对信号的延迟影响不可忽略. 针对此问题, 本文提出了一种基于SAR回波信号的三频相位自适应TEC反演新方法, 利用反演的结果对电离层的影响进行校正. 给出了校正前后的点目标成像仿真, 结果显示此方法充分考虑了多重散射效应引起的TEC估计误差, 可以有效地补偿电离层对距离向成像的影响, 提高了距离向点目标图像质量.     

A DEVICE FOR MEASURING GULLY HEADWALL MORPHOLOGY

This paper describes a low-cost device for measuring the three-dimensional morphology of a gully headwall. The device was designed to operate in a gully system with the following characteristics: overhanging banks caused by a thick, dense root mat; retreat of the underlying unconsolidated sediments through small slab failures, leading to a considerable variation in retreat rate at each point on the headwall; and changes in the orientation of the headwall owing to changes in sediment properties and the topographical and hydrological controls of gully growth. The device is used to measure a series of closely spaced vertical profiles of the headwall, and the collected data are combined to draw a contour map showing the distance from the plane of the instrument to the headwall. Comparing maps for sequential times enables retreat rates for the diffferent proportions of the headwall to be quantified.     

Synthetic information prediction system for crisis mine based on GIS

Reserves of some kinds of the crisis mines will be lack now or from now on, because of lacking seriously reserves of mineral resources and the crisis of exploring bases in support. So that it is urgent to predict, appraise, development and utilize the replaceable resources of the crisis mines. The mineral resources prediction software system of synthetic information is intelligent GIS which is used to quantitative prediction of large-scale synthetic information mineral target. It takes the geological body and the mineral resource body as a unit. And it analyzes the ore deposit genesis and metallotect, knows the spatial distribution laws of the ore deposit and ore body, and establish the prospecting model based on the concept of establishing the three-dimensional space of a mine. This paper will primarily discuss some important problems as follows: the secondary development of various kinds of data(including geology, geophysical prospecting, geochemical prospecting and remote sensing, etc); process synthetically and establish the synthetic information interpretative map base; correspond prospecting model with synthetic information of ore deposit; divided into statistical units of metallogenic information synthetic anomalies based on the synthetic information anomalies of ore control, then research the metallogenic information variable of unit synthetically and make quantitative prediction according to choose the quantitative prediction math model which is suitable to the demands of large-scale precision; at last, finish the target area optimization of ore deposit (body).     

天山北坡城市群城市综合承载力评价

天山北坡城市群是新疆打造丝绸之路经济带核心区的重要载体和节点。以新疆“十二五”规划中天山北坡经济带所覆盖的12个城市为研究对象,从人口、生态环境、资源、经济、公共服务、交通等6个维度构建评价体系,运用改进的熵值法、变异系数等对2011-2013年天山北坡城市群城市综合承载力进行分析。结果表明:天山北坡城市群城市综合承载力空间分异明显且呈固化趋势;资源和经济是造成各城市综合承载力差距的主要原因;生态环境与资源为承载力首要制约因素且二者均超载严重;城市群生态-生产-生活承载力耦合协调度整体有所改善,但情况依旧较差。