基于欺骗式动目标的SAR干扰技术研究

针对军事运动目标的保护问题，提出了基于欺骗式动目标的SAR干扰方法，该方法根据收到的雷达信号，调制不同的散射强度和位置信息，模拟产生多个虚假的运动目标，避免了静止场景不能干扰动目标成像的缺点。分析了雷达位置确定误差对欺骗式动目标干扰效果的影响，给出了一种干扰机的布阵方法。仿真证明，欺骗式动目标干扰方法可以达到保护运动目标和向被干扰雷达提供虚假信息的目的。     

关于实孔径雷达影像匹配定位问题

地面高程起伏对机载雷达成像定位影响较大,要实现飞行器的精确定位,必须修正地形起伏的影响。分析了雷达成像的几何关系及特点,分别从影像匹配定位和飞行器定位两方面探讨了地形起伏的影响,对地形起伏影响的修正方法进行了研究,提出了适于飞行器上实时处理的误差修正算法,并利用该方法对实验中获取的数据进行了改正,得到了满意的结果。     

多次覆盖技术在探地雷达勘探中的应用

多次覆盖技术作为一种增强信号、压制干扰的方法,广泛用于地震勘探工作中,可以大大提高有用信号的信噪比。本文作者把多次覆盖技术引入探地雷达测量工作中,通过与剖面法作对比试验来论证多次覆盖技术在探地雷达勘探中应用的可行性及优缺点。作者根据试验资料总结探地雷达工作中雷达波传播规律、工作参数、资料处理方法,对丰富探地雷达勘探技术作了一次有益的尝试。     

Saturation of the Large Aperture Scintillometer

The saturation aspects of a large aperture (0.3 m) scintillometer operating over a 10-km path were investigated. Measurements were made over mainly forested, hilly terrain with typical maximum sensible heat fluxes of 300–400 W m ⁻², and over flat terrain with mainly grass, and typical maximum heat fluxes of 100–150 W m⁻². Scintillometer-based fluxes were compared with eddy-correlation observations. Two different schemes for calculating the reduction of scintillation caused by saturation were applied: one based on the work of Hill and Clifford, the other based on Frehlich and Ochs. Without saturation correction, the scintillation fluxes were lower than the eddy-correlation fluxes; the saturation correction according to Frehlich and Ochs increased the scintillometer fluxes to an unrealistic level. Correcting the fluxes after the theory of the Hill and Clifford gave satisfying results     

磁异常数据处理方法的应用

文章以冀东一些铁矿区地面磁测成果为例,总结了磁异常转换、定量解释推断一些方法的应用及效果.     

土壤、大气尘中晶体的组成及其物源指示意义——以长沙、株洲和湘潭地区为例

基于长沙、株洲和湘潭地区大气尘(可吸入颗粒和近地表积尘)和表层土壤的X-射线衍射(XRD)分析数据,采用微量相鉴定方法获得的结果显示,大气尘和表层土壤中包含石英、石膏、方解石、白云石、硫酸镉等自然矿物及SiS_2、NiTi、Cd_3As_2、FeOCl等非自然源晶体。比较了长沙、株洲、湘潭地区大气尘与表层土壤的晶体组成,分析了大气尘矿物及非自然源晶体的空间分布,探讨了其环境指示意义。     

山西晋城矿区成庄井田3号煤储层的物性研究

对研究区内3号煤储层的几何形态、割理和孔隙系统进行了研究,并引入了储层结构综合指数(SI)来评价研究区内煤层透气性特征和甲烷运移能力,并得出了如下结论:①全区煤层厚度稳定,是煤层甲烷的良好储集层;②根据全区割理发育程度推测出,构造主应力来自NE-SW方向;③通过孔隙系统研究,3号煤层基本上属于非渗透性储层;④成庄井田3号煤层结构综合指数(SI)等值线平面图,显示了煤层透气性由东北向西南呈逐渐变差的趋势。     

Quasi-stationary flow structure in turbidity currents

A turbidity current is a particle-laden current driven by density differences due to suspended sediment particles. Turbidity currents can transport large amounts of sediment down slopes over great distances, and play a significant role in fluvial, lake and submarine systems. To better understand the sediment transport process, the flow system of an experimentally produced turbidity current in an inclined flume was investigated using video processing. We observed that the current progresses with constant frontal velocity and maintains an unchanged global interface geometry. In addition, the spatio-temporal profiles of the inner mean and turbulence velocity obtained by ultrasound velocity profiler (UVP) showed that similar distributions were maintained, with low dissipation. The results indicate that the turbidity current progressed in a quasi-stationary state, which enabled long-distance sediment transport. To understand the mechanisms behind the quasi-stationary flow, we analyzed the forces acting on the turbidity current. We found that under particular densities of suspended particles, the gravitational force is balanced by the viscous forces along the slope direction. We conclude that this specific force balance induces the quasi-stationary flow structure, enabling the long-distance transport of a substantial amount of sediment downstream with low dissipation.     

干涉雷达在DEM测量中的精度影响及处理方法

干涉合成孔径雷达 (INSAR)为数字高程模型 (DEM)测量提供了一种新的手段。它具有同时获取三维信息、测量范围广、空间和高程分辨率高等优点。文中首先扼要介绍了干涉雷达的原理 ,然后重点讨论几个影响测量精度的因素及其处理方法 ,如相关、运动补偿、配准、相位展开等。