甘肃两河口地区水系沉积物异常评价

对两河口地区1:5万水系沉积物资料处理,圈定了大量元素异常。应用R型因子分析结果,划分元素组合。从元素组合特征方面分析,评价异常找矿意义,确定了7个找矿远景区,其中1号异常为最佳找矿靶区。     

红枫湖夏季分层期间pCO2分布规律的研究

在夏季分层期间对红枫湖南、北湖湖心的水样进行分层采集,同时测定了分层水样的温度、pH、HCO₃-浓度、溶解氧(DO)、叶绿素a(Chl-a)及铵根离子(NH₄+)、硝酸根离子(NO₃-)、磷酸根离子(PO₄3-)的浓度,水体中CO₂的分压(pCO₂)由化学平衡及亨利定律求得。研究结果表明:光合作用、有机质降解及水体热分层是影响红枫湖夏季pCO₂分布的主要因素。其中,温水层CO₂欠饱和是光合作用吸收CO₂引起的,温跃层中pCO₂的急剧增加是光合产物降解产生CO₂引起的。静水层沉积物附近pCO₂最高并且还有持续增加的趋势,说明沉积物中有机质降解是静水层中CO₂增加的主要原因,夏季湖底水温较高加快了沉积物中有机质的降解。分层现象使pCO₂在水体中的分布差别明显,并且使静水层中CO₂得到积累。此外,夏季红枫湖水体中pCO₂的变化与NH₄+、PO₄3-的变化密不可分,表现为温水层中光合作用消耗NH₄+、PO₄3-,有机质降解过程伴随NH₄+、PO₄3-的释放。     

蚀变岩的蠕变特性研究

以某水电站工程项目为依托,利用自行研制的试验仪器对大量的蚀变岩做了单轴压缩流变试验。通过对试验数据的处理和分析,得到了该种岩石的流变,并对蚀变岩的蠕变特性进行了分析总结,为工程设计提供了试验依据。     

长江流域沿江镉异常源追踪与定量评估的方法技术研究:以长江流域安徽段为例

长江全流域性的Cd异常是被中国正在进行的多目标地球化学调查发现的重大生态环境问题。以长江流域安徽段为研究对象,对沿江镉异常源追踪与定量评估的方法技术进行了系统研究。通过对安徽段长江干流及其主要支流悬浮物中元素含量的测量查明:悬浮物是流域内重金属元素大跨度迁移的主要载体;Cd在悬浮物中的富集程度远远大于其他重金属元素,这或许正是Cd可以形成沿江流域性异常的主要原因;长江干流悬浮物中重金属元素含量的变化明显受到沿江支流的影响。安徽段长江干流及其主要支流重金属元素输出通量定量计算结果表明:秋蒲河是安徽段重金属元素输出通量最大的支流,每年在安徽段长江两岸土壤中沉积下约4.45t的Cd。利用悬浮物加密测量、1∶5万土壤测量和岩石测量对顺安河流域Cd异常源追踪结果显示:内生金属矿床特别是铅锌矿是悬浮物中Cd的最大的供应源。采用河漫滩沉积物分层采样技术和同位素测年技术,初步恢复了研究区Cd等重金属元素沉积和污染的地球化学历史,对研究区Cd等重金属元素异常的未来演变趋势进行了预警预测。     

太湖入湖河道沉积物中生物利用磷和营养水平分析

为了解太湖入湖河道的营养状况,研究了太湖西部河流沉积物生物利用磷的组成与分布。研究结果显示,北部沉积物中营养元素较高,南部较低;沉积物中生物利用磷的含量次序为藻类可利用磷(AAP)>NaHCO3提取磷(OLP)>水溶性磷(WSP)>易解吸磷(RDP),其中AAP是重要的生物利用磷,AAP的比例越高,富营养化程度越高。AAP与营养元素的相关性在不同区域河道有所不同,北部河道与总氮(TN)、总磷(TP)相关性较好,中部和南部河道与沉积物有机质总量(TOM)相关性较好。沉积物的生物利用磷受不同污染源影响较大。对比河道沉积物与湖泊沉积物的特征,发现湖泊沉积物中生物利用磷(BAP)/总磷(TP)、藻类可利用磷(AAP)/总磷(TP)都高于河道沉积物,表明湖泊沉积物中的磷更容易被植物吸收。     

Pelagic records from the Equatorial Ninetyeast Ridge and significant environmental events during the past 3.5 Ma

This paper presents pelagic records of planktic foraminifera, as well as data of stable isotope stratigraphy and carbonate stratigraphy since 3.5 Ma B.P. from site ODP758 in the Ninetyeast Ridge of the Indian Ocean. Based on these data, manifestations and related mechanisms of major tectonic and environmental events such as the rapid uplift of the Himalaya Mountains, “middle Pleistocene climatic transition” and “mid-Brunhes dissolution event” in the region are discussed. According to the analysis and comparison of various indices and changes in terms of foraminifera assemblage, paleotemperature, paleosalinity and themocline from site ODP758, the authors deduce that the paleoclimatic changes might correlate with the mid-Pleistocene transition at 1.4–1.7 Ma B.P. The changes of CaCO₃, mass accumulation rates (MAR) of CaCO₃ and non- CaCO₃ MAR indicate that the loaded terrigenous sediments increased at 1.7 Ma, which is in agreement with the uplift history of the Qinghai-Tibet plateau as shown by the available data. The last two changes coincide with the uplift of the Qinghai-Tibet plateau, hence they are called “Qinghai-Tibet movement” (1.7 Ma), and the “Kunlun-Yellow River movement” (1.2–0.6 Ma). The changes of the CaCO₃ content, coarse fraction (> 150 μm) content and planktonic foraminifera biostratigraphy show that strong dissolution of abyssal CaCO₃ occurred in the study region during 0.5–0.4 Ma. The event was consistent with the “mid-Brunhes dissolution event” in the sedimentary records of the Atlantic Ocean, Pacific Ocean, Indian Ocean and Nansha sea area of the South China Sea. __________ Translated from Geological Bulletin of China, 2007, 26(12): 1627–1632 [译自: 地质通报]     

Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

ELECTROCHEMICAL MEASUREMENT OF STEEL CORROSION IN SEABOTTOM SEDIMENT WITH “MD” METHOD

The tbough one year cormsion potential and polarisation resistanoc for 3 kinds of stals in seabottomedment of Liaodong Bay were measured with the “MD” method.The measurements wiIl have some thoretical and pndital talues. The thooretical valoc lies in thatthe reoorded changing process of the practital corrosion case can be basis for indoor discussion andeectrochemical on the corrosion practical value lies in that the obtained datu canbe basis for designing and controlling elatrochemical protation syttems. In fact, it is very difficult tomeasure in situ the cornosion parnders of steeIs in sea sediment.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Palaeoclimatic studies in South Shetland Islands,Antarctica, based on numerous stratigraphic variables in lake sediments

The hitherto longest found lake sediment sequence on Byers Peninsula, Livingston Island, South Shetland Islands, was analysed with respect to lithology, chronology, diatoms, Pediastrum, pollen and spores, mosses, mineralogy, and sediment chemistry. During the ca. 5000 year long development the sediments were influenced by frequent tephra fall-outs. This volcanic impact played a major role in the lake's history during two periods, 4700–4600 and 2800–2500 BP, but was of importance during the lake's entire history with considerable influence on many of the palaeoenvironmentally significant indicators. The large and complex data set was analysed and zonated with different types of multivariate analysis. This resulted in a subdivision of the sequence into 8 time periods and 21 variables. Redundancy analysis (RDA) of this data set, both without and with the tephra periods, and with 4–6 of the variables as explanatory environmental variables, reveal that climatic/environmental signals are detectable. The palaeoclimatic picture that emerged out of the tephra noise suggests that the first 100 years were characterized by mild, humid conditions. This was followed by a less mild and humid climate until ca. 4000 BP when a gradual warming seems to have started, coupled with increased humidity. These mild and humid conditions seem to have reached an optimum slightly after 3000 BP. At ca. 2500 BP a distinct climatic deterioration occurred with colder and drier conditions and long seasons with ice cover. This arid, cold phase probably reached its optimum conditions at ca. 1500 BP, when slightly warmer conditions might have prevailed for a while. Except for the modern sample with rather mild climate, the last 1400 years seem to have been fairly arid and cold, and the effects of the frequent volcanic activity during this period is only vaguely seen in the records.