SAR海洋内波表层流反演方法探讨

基于海洋内波SAR成像机理与M4S海面微波散射成像模型,提出SAR海洋内波表层流反演新方法。首先从SAR图像上获得内波剖面的海面后向散射强度,利用AH理论的线性近似关系得到猜测表层流,通过海面微波散射成像模型仿真海洋内波的SAR海面后向散射强度,利用二分法不断地修改风速和流速梯度等参数,使仿真信号最大程度的逼近实际SAR图像上的海面后向散射强度,输出最终海表层流。以中国南海海区3景海洋内波SAR图像为例,对该方法进行了探讨。结果表明,仿真的海洋内波SAR海面后向散射强度剖面和实际SAR图像上的信号剖面吻合,两者的相关系数达90%以上,说明该反演方法是收敛与可行的。     

塔河油田地面工程信息系统的设计与探讨

着重探讨了塔河油田地面工程信息系统的建设思路和实现方法,针对油田的实际,以当前先进的组件式地理信息系统软件MAPGIS和可视化编程工具Microsoft Visual Studio构架的技术体系为基础,开发一套方便实用的油田地面工程信息系统。本系统建设为集原油集输、天然气和油田伴生气集输、道路、输供电线路为一体的可视化数据平台,实现了整个油田数据采集、管线图绘制,以及信息的浏览、查询统计、综合管理等功能。     

External atmospheric corrections in geodetic very-long-baseline interferometry

Three methods to correct for the atmospheric propagation delay in very-long-baseline interferometry (VLBI) measurements were investigated. In the analysis, the NASA R&D experiments from January 1993 to June 1995 were used. The methods were compared in correcting for the excess propagation delay due to water vapour, the “wet” delay, at one of the sites, the Onsala Space Observatory on the west coast of Sweden. The three methods were: (1) estimating the wet delay using the VLBI data themselves; (2) inferring the wet delay from water vapour radiometer (WVR) data, and (3) using independent estimates based on data from the global positioning system (GPS). Optimum elevation cutoff angles were 22^∘ and 26^∘ when using WVR and GPS data, respectively. The results were found to be similar in terms of reproducibility of the estimated baseline lengths. The shortest baselines tend to benefit from external measurements, whereas the lack of improvement in the longer baselines may be partly due to the large amount of data thrown away when removing observations at low elevation angles. Over a 2 week period of intensive measurements, the two methods using external data showed an overall improvement, for all baseline lengths, compared to the first method. This indicates that there are long-term systematic errors in the wet delay data estimated using WVR and GPS data. Received: 27 October 1998 / Accepted: 20 May 1999     

树冠叶面积体密度和叶面积指数的间接估值方法研究

本文论述了根据计算机断层成像的原理，对树冠的叶面积体密度和叶面积指数等构造参数进行间接估值的方法。说明了对树冠多角度底视数据的获取，对树冠外形的反投影重构，和获得冠层内叶面积体密度的空间分布的原理和方法。总结了测量工作经验，并用测量数据对估值方法进行了检验。     

遥感图像的位置校正算法

通过对遥感图像解译中传统的几何位置校正方法的研究,提出了一种曲面样条函数算法,从而能解决传统的方法校正不完全的缺陷。     

利用地震面波和重力资料联合反演地壳—上地幔三维密度结构的方法探讨

本文探讨了利用地震面波和重力资料联合反演地壳－地幔三维密度结构的反演问题。首先建立了地震面波和重力资料的观测方程,然后应用广义线性反线理论给出了反演问题的解。模型试验结果表明,与单纯面波反演的结果相比,联合反演的解在分析率和方差两个方面都有改善,当加入扰动重力数据时,在０－３００ｋｍ深度范围内联合反演的结果明显好于单纯面波反演的结果。     

福建省近海区域海面表层温度的卫星遥感应用研究

分析了海洋热红外辐射的传输特性,建立了海温定量反演计算的统计回归模型,介绍了福建省近海区域海温产品生成业务化软件系统及其应用情况。     

Stratified spectral mixture analysis of medium resolution imagery for impervious surface mapping

Linear spectral mixture analysis (LSMA) is widely employed in impervious surface estimation, especially for estimating impervious surface abundance in medium spatial resolution images. However, it suffers from a difficulty in endmember selection due to within-class spectral variability and the variation in the number and the type of endmember classes contained from pixel to pixel, which may lead to over or under estimation of impervious surface. Stratification is considered as a promising process to address the problem. This paper presents a stratified spectral mixture analysis in spectral domain (Sp_SSMA) for impervious surface mapping. It categorizes the entire data into three groups based on the Combinational Build-up Index (CBI), the intensity component in the color space and the Normalized Difference Vegetation Index (NDVI) values. A suitable endmember model is developed for each group to accommodate the spectral variation from group to group. The unmixing into the associated subset (or full set) of endmembers in each group can make the unmixing adaptive to the types of endmember classes that each pixel actually contains. Results indicate that the Sp_SSMA method achieves a better performance than full-set-endmember SMA and prior-knowledge-based spectral mixture analysis (PKSMA) in terms of R, RMSE and SE.     

无人机遥感真正射影像高精度制图

近年来无人机低空遥感技术不断发展,利用无人机影像生成的真正射影像（TDOM）在成图精度、制作流程方面仍有提高的空间。本文采用固定翼无人机和专业摄影相机采集影像,布设地面控制点,提出了利用运动恢复结构（SfM）和多视立体视觉（MVS）工作流来生成高精度数字表面模型（DSM）和数字正射影像（DOM）的方法;对遮蔽倾斜部分进行阴影检测、DSM修编和多视影像纹理补偿生成TDOM;最后用TDOM上随机分布的检查点进行精度检查,水平精度为3.3 cm,垂直精度为7.5 cm;消除了DOM中倾斜和阴影部分,使建筑物保持垂直视角,生成的满足1：500比例尺高精度并消除倾斜阴影的TDOM可用于农村宅基地确权、国土规划设计等领域。     

大尺度平原城市精细汇水区分级划分研究

在城市内涝模拟研究中,汇水区划分是十分重要的环节,同时对大尺度平原城市进行汇水区精细划分也是研究者共同研究的技术难点.针对现有基于DEM流向分析的划分方法存在的无法正确反映实际城市复杂地形和流向问题,本文提出了一种顾及地类和流向,适用于大尺度平原城市的精细汇水区分级划分方法.首先,从城市自然地形和主干河流出发,进行一级...