狮子山铜矿岩壁X取样研究与应用

本文主要介绍了应用 X射线荧光方法在狮子山铜矿进行岩壁 X取样的技术和工作过程 ,提出了一些克服岩壁 X取样影响因素的方法。并对使用效果进行了评价     

北京西山地面塌陷的形成因素浅析

地下采矿是地面塌陷失决条件，自然重力及其他外界触发因素是其发展动因，地面塌陷受覆岩时代及岩性，采空区尺寸大小，煤层倾角，煤层厚度及开采深度，重复采动，水文条件变化，地形地势和松散盖层的影响。     

航空短波红外分光谱遥感技术直接寻找油气藏的有效性及应用实例

采用航空短波红外分光谱遥感技术，在新疆准噶尔盆地和塔里木盆地某些油气区，进行直接寻找油气资源的试验研究后发现，油气区含油岩系，油气藏上方盖层土壤的光谱在２３００和２３５０ｎｍ波段具有双吸收特征。     

Surface chemical analysis in coal preparation research: complementary information from XPS and ToF-SIMS

The application of X-ray photoelectron spectroscopy (XPS) to coal surface characterisation for preparation research is described. Progress towards the acquisition of complementary surface chemical information by time-of-flight secondary ion mass spectrometry (ToF-SIMS) is also discussed. Surface-based beneficiation techniques such as flotation are assuming greater importance as the proportion of fines in raw coal increases due to the proliferation of high capacity mining methods. A necessary condition for the floatability of a coal particle is adequate hydrophobicity, and the degree of hydrophobicity of the flotation concentrate is one factor influencing the ease with which its dewatering can be affected. The hydrophobicity of a coal is very difficult to measure directly because of microporosity, and it is often necessary to deduce the degree of hydrophobicity from a knowledge of the surface chemistry. XPS is able to provide sufficient analytical data to allow relative levels of hydrophobicity to be estimated. In principle, ToF-SIMS should be able to supply additional information enabling refinement of such estimates; however, there are insufficient data at present to allow the ionic fragments detected to be related to specific functional groups at the coal surface.     

Modelling of soil temperature profiles using data from the pilot experiment at Anand

We present some preliminary results from a multi-layer soil temperature finite-difference model using the data set obtained during the pilot experiment on land surface processes at Anand. We hope that the present results will prove useful during the final field experiments scheduled for the coming monsoon season.     

Utilization of lime,slag and fly ash for improvement of a colluvial soil in New South Wales,Australia

In Australia, colluvial soils form large terrains which are often subjected to considerable erosion and mass movement. This study presents a laboratory evaluation of the improvement effected by hydrated lime, milled blast furnace slag and fly ash on a fine grained (erosive) colluvial soil in New South Wales, Australia. Geotechnical tests were conducted to determine the compaction and consolidation characteristics and the compressive and shear strength properties of the blended and natural soil specimens. The effect of these additives on the Atterberg limits and pH levels is also investigated. As large amounts of fly ash and steel slag are produced in New South Wales, it is economically attractive to utilize these industrial by-products for ground improvement rather than employing conventional methods such as lime treatment. This study demonstrates that for the colluvial soil tested, milled slag is the most effective in terms of improving the internal friction angle of the treated soil, while lime is the most suitable for achieving the optimum compressive strength. Non-pozzolanic fly ash is found to be inappropriate as a soil improving agent. The cost of ground treatment using the various additives is also estimated and compared.     

地质雷达及其在环境地质中的应用

本文结合近几年联邦德国在环境地质方面的研究工作对地质雷达在环境工程领域中的应用范围及其局限性作了简要总结,文中并介绍了地质雷达技术的方法原理及存在问题。     

黄铁矿表面及其与Au（HS）2^—溶液作用的STM研究

本文用ＳＴＭ研究了黄铁矿和方铅矿表面的原子结构、纳米级微形貌、电子态分布及其吸附态的特点。ＳＴＭ电流图象揭示了表面缺陷与表面电子态之间的对应关系，硫化和的表面的化学反应活性可能是表现缺陷引起的局域导电性增强有关。ＳＴＭ观察进一步表明黄铁矿和方铅矿对金的硫氢配合物的吸附作用优先发生于扭折位和台阶边缘等高能部位，反映出吸附态的分布也是与表面电子态分布相对应的。这样就从微观领域考证了硫化物表面对化学活性     

考虑入渗和蒸发影响的土坡稳定性分析方法

本研究建议的一种分析方法假定斜坡非饱和土体的水分运动参数及剪强度参数与饱和度的依赖关系均可根据实验或经验确定。通过数值计算方法妥任意给定的入渗和蒸发边界条件下斜坡土体的瞬态含水率分布及与其相对应的瞬态抗剪强度参数分布。在此基础上瞬态斜坡安全因数即可通过常规的稳定性分析方法求得。     

用土的分形结构确定土的水份特征曲线

运用筛析法和比重计法，分析了宁夏膨胀土的颗粒分布，发现粒径介于0．002～0．1mm的粒度分布是分形的，分维介于2．46～2．67；运用上孔隙分布的分维确定水份特征曲线，得到了很好的结果。此外，还探讨了粒度分形分布的机制。