Comparison between polar regions of Mars from HEND/Odyssey data

In this paper, we have analyzed neutron spectroscopy data gathered by the High Energy Neutron Detector (HEND) instrument onboard Mars Odyssey for comparison of polar regions. It is known that observation of the neutron albedo of Mars provides important information about the distribution of water-ice in subsurface layers and about peculiarities of the CO₂ seasonal cycle. It was found that there are large water-rich permafrost areas with contents of up to ∼50% water by mass fraction at both the north and south Mars polar regions. The water-ice layers at high northern latitudes are placed close to the surface, but in the south they are covered by a dry and relatively thick (10-20 cm) layer of soil. Analysis of temporal variations of neutron flux between summer and winter seasons allowed the estimation of the masses of the CO₂ deposits which seasonally condense at the polar regions. The total mass of the southern seasonal deposition was estimated as 6.3×¹⁰¹⁵ kg, which is larger than the total mass of the seasonal deposition at the north by 40-50%. These results are in good agreement with predictions from the NASA Ames Research Center General Circulation Model (GCM). But, the dynamics of the condensation and sublimation processes are not quite as consistent with these models: the peak accumulation of the condensed mass of CO₂ occurred 10-15 degrees of Ls later than is predicted by the GCM.     

A coupled microphysical/radiative transfer model of albedo and emissivity of planetary surfaces covered by volatile ices

A new model of albedo and emissivity of planetary surfaces covered by volatile ices in the form of porous slab-like deposits is described. In the model, a radiative transfer model is coupled with a microphysical model in order to link changes in albedo and emissivity to changes in porosity caused by ice metamorphism. Preliminary results for Triton, Pluto, and Io are presented (the martian CO₂ caps will be the subject of a separate publication). The coupled model will aid in the interpretation of ground-based and spacecraft observations and should lead to advances in surface and atmospheric modeling.     

Longevity of fluorine-bearing tremolite on Venus

There is a general belief that hydrous minerals cannot exist on Venus under current surface conditions. This view was challenged when Johnson and Fegley (2000, Icarus 146, 301-306) showed that tremolite (Ca₂Mg₅Si₈O₂₂(OH)₂), a hydrous mineral, is stable against thermal decomposition at current Venus surface temperatures, e.g., 50% decomposition in 4 Ga at 740 K. To further explore hydrous mineral thermal stability on Venus, we experimentally determined the thermal decomposition kinetics of fluorine-bearing tremolite. Fluor-tremolite is thermodynamically more stable than OH-tremolite and should decompose more slowly. However how much slower was unknown. We measured the decomposition rate of fluorine-bearing tremolite and show that its decomposition is several times to greater than ten times slower than that of OH-tremolite. We also show that F-bearing tremolite is depleted in fluorine after decomposition and that fluorine is lost as a volatile species such as HF gas. If tremolite ever formed on Venus, it would probably also contain fluorine. The exceptional stability of F-bearing tremolite strengthens our conclusions that if hydrous minerals ever formed on Venus, they could still be there today.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Fresnel modeling of hematite crystal surfaces and application to martian hematite spherules

The gray crystalline hematite at Meridiani Planum first discovered by the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) instrument occurs as spherules that have been interpreted as concretions. Analysis of the TES and mini-TES spectra shows that no 390 cm⁻¹ feature is present in the characteristic martian hematite spectrum. Here, we incorporate the mid-IR optical constants of hematite into a simple Fresnel reflectance model to understand the effect of emission angle and crystal morphology on the presence or absence of the 390 cm⁻¹ feature in an IR hematite spectrum. Based on the results we offer two models for the internal structure of the martian hematite spherules.     

高能偏振能量色散X射线荧光光谱仪应用现状和进展

对高能偏振能量色散X射线荧光光谱仪基本特点及其用于环境、生物、地质样品中痕量元素的分析和RoSH检测等领域的应用现状予以介绍,并对二次靶与滤光片在痕量元素分析中的应用作了探讨。     

XEPOS型偏振能量色散X射线荧光光谱仪分析蒙古铁矿石

以熔融玻璃片和粉末压片制样,采用XEPOS型偏振能量色散X射线荧光光谱仪,建立了铁矿石中总铁、氧化钙、氧化镁、二氧化硅、三氧化二铝、硫、磷、铜等组分的快速分析方法。着重讨论硫、磷两元素测定的可行性和Lucas-Tooth、Price数学校正模型的适应性和改善方法的途径。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

超低频电磁探测信号能量的计算及其地质应用

被动式超低频电磁探测技术是一种有效的探测地下地质体和资源的手段,但采用现有的处理方法得到的探测曲线较容易受到各种噪声的干扰,影响了对所获得的探测曲线的解释。笔者将信号能量引入到超低频电磁探测信号的处理中。首先根据信号能量计算原理,计算不同深度的超低频探测信号的能量值．获取能量曲线。同时,根据具体应用目的,分析其曲线特征,并将信号能量曲线与现有的信号曲线,如最大值曲线、最小值曲线等进行对比分析。结果表明,与现有方法相比,笔者所提出的信号能量曲线方法能更准确地反映地下岩层特征,有利于曲线的地质解译。