Interpolation by regularized spline with tension: I. Theory and implementation

Bivariate and trivariate functions for interpolation from scattered data are derived. They are constructed by explicit minimization of a general smoothness functional, and they include a tension parameter that controls the character of the interpolation function (e.g., for bivariate case the surface can be tuned from a membrane to a thin steel plate), Tension can be applied also in a chosen direction, for modeling of phenomena with a simple type of anisotropy. The functions have regular derivatives of all orders everywhere. This makes them suitable for analysis of surface geometry and for direct application in models where derivatives are necessary. For processing of large datasets (thousands of data points), which are now common in geosciences, a segmentation algorithm with a flexible size of overlapping neighborhood is presented. Simple examples demonstrating flexibility and accuracy of the functions are presented.On leave from the Department of Physical Geography and Cartography, Comenius University, Mlynská dolina, Bratislava, Czechoslovakia.On leave from the Institute of Physics, Dúbravská cesta 9, Bratislava, Czechoslovakia.     

Chrysophyte stomatocyst taxonomy — classification of snowflakes?

The utility of classifying chrysophyte stomatocysts by their characteristic honeycomb and ridge patterns is questioned, because a strikingly similar expanding pattern appears on the surface of ionized polymer gels during osmotical swelling as a result of simple physical forces. The rapid accumulation of silicate into a spherical cyst inside a chrysophyte cell appears to be as a physical process sufficiently similar to result in an analogous pattern in microscopic scale. Chrysophyte stomatocysts that possess honeycomb or ridge patterns could be regarded as frozen moments of the pattern evolution during the silicate gel phase. As a consequence, such structures should have little taxonomical value.     

突发性地面增温与临震前兆——以1988年澜沧、耿马7.6,7.2级地震为例

本文通过较多的地面温度资料分析,认为1988年11月6日澜沧、耿马地震前几天,震区及其周围大范围的突发性地面增温异常是一种临震前兆,总结了增温异常的时空演变规律与地震活动的关系,并对其形成机制提出初步想法     

Chemical aspects of iron oxide coagulation in water: Laboratory studies and implications for natural systems

Initial coagulation rates of colloidal hematite (-Fe₂O₃) particles (diameter less than 0.1 µm) were measured experimentally in well-defined laboratory systems at constant temperature. The relative stability ratio,W, was obtained at various ionic strengths in NaCl medium and at pH values in the range from 3 to 12. ExperimentalW values ranged from 1 to 10⁴ in various systems. The results delineate the roles ofspecific andgeneralized coagulation mechanisms for iron oxides. Among the specifically-interacting species (G _ads ⁰ >G _coul ⁰ ) studied were phosphate, monomeric organic acids of various structures, and polymeric organic acids. The critical coagulation-restabilization concentrations of specifically-interacting anions (from 10^–7 to 10^–4 molar) can be compared with the general effects of non-specific electrolyte coagulants (10^–3 to 10^–1 molar). The laboratory results are interpreted with the help of a Surface Complex Formation/Diffuse Layer Model (SCF/DLM) which describes variations of interfacial charge and potential resulting from variations of coagulating species in solution. Comparison of these laboratory experiments with observations on iron behavior in estuarine and lake waters aids in understanding iron removal mechanisms and coagulation time scales in natural systems.     

Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples

New techniques to determine distributions of cleat aperture, cleat orientation and cleat spacing from CT scans have been developed. For cleat orientation and spacing distributions, two different coal blocks were scanned. The CT scans have been analyzed for the three orthogonal directions. Histograms of the cleat orientations are bimodal, expressing the typical cleat texture of face and butt cleats and bedding perpendicular relaxation fractures. Deviations up to 20° from the peak values in the cleat orientation distributions were used as input for automated image analysis of cleat spacing. Distributions of the cleat spacing measurements are related to the face and butt cleat directions. The term “relevant cleat length” is introduced as a measure to extract the amount of cleat length involved with the cleat spacing measurements. The ratio ranges from 0.03 to 0.38 and expresses the difference in cleat texture in both samples. Cleat spacing versus relevant cleat length shows sample specific patterns for face cleat, butt cleat and bedding. To describe cleat aperture quantitatively, peak height and missing attenuation have been used. The image of a cleat was seen as a convolution of a rectangular fracture profile with a Gaussian point spread function.     

Environmental impacts from mining at Taojiang Mn ore deposit, central Hunan, China

The Taojiang Mn ore deposit was exploited in the early 1960s, and waste rocks were developed since then. Because the Mn ores were hosted within the metal-enriched black shales （Peng et al., 2004）, the continuous mining has led to the exposure of an immense quality of black shales, which might cause serious impacts on environments. The present study deals with this environmental issue with samples from the waste rocks, and from the surrounding soils and surface water. The mineralogy of the waste rock was studied using EMPA, then a large number of elements in all waste rock, soil, and water samples were analyzed at a wide range of concentrations with high accuracy using an Elan6000 ICP-MS machine at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences. The waste rock is composed mostly of black shales, with minor Mn carbonates. Both black shales and Mn carbonates of the waste rock contain many sulfide minerals, mainly pyrite, with minor galena, sphalerite, chalcopyrite, and others. The waste rocks are enriched in many metals including Sc, V, Cr, Co, Ni, Fe, Mn, Cu, Zn, Pb, Th, U, Mo, Sb, Sn, Tl, and others, and the metals are mostly hosted within the sulfides. Weathering of waste rocks might cause emission of the following metals： V, Cd, Ni, Th, U, Mo, Sb, Tl, Sc, Cr, Cu, Zn, Sn, and minor Co, and Pb. The surrounding soils are highly enriched in Cr, Co, Cu, Zn, Mn, Mo, Cd, Tl, and Pb, with the enrichment factors of 2.67.3.8, 7.26, 7.27, 8.2, 5.7, 13, and 5.4, respectively. The element ratios （Rb/Cs, Fe/Mn, Nb/Zr, Hf/Zr, and Ba/Sr） and REE distribution patterns of the soils are similar to those of the waste rocks and bedrocks.     

Speciation of adsorbed arsenate on the surface of hydrous iron oxide

Adsorption of arsenate on hydrous iron oxide is an important process controlling geochemical cycling of arsenic in environment as well as the fate of arsenic-bearing mining wastes. The widely accepted view on the mechanism of adsorption is that arsenate is adsorbed via bidentate binuclear inner-sphere complexation. In this study, we characterized the arsenate-hydrous iron oxide sorption solids synthesized at pH=3-8 using Fourier transformed infrared spectroscopy （FTIR） and X-ray diffraction （XRD）. It has been determined that poorly crystalline ferric arsenate developed on the surface of iron oxide when arsenate was sorbed at acidic pH, while at alkaline pH the adsorption of arsenate was via bidentate complexation.     

Permeable Reactive Barrier for the treatment of contaminated surface water in Katedan industrial development area, Hyderabad, India

Permeable Reactive Barrier （PRB） is an emplacement of inert material （s） in the subsurface, designed to intercept a contaminated plume, provides a preferential flow path through the reactive media, and transforms the contaminant into environmentally acceptable forms to attain concentration remediation goals at the discharge of the barrier. The phenomena, which help in remediation within PRB, are adsorption/sorption, precipitation, oxidation/reduction and biodegradation. Various materials like zero-valent iron, zero-valent bi-metals, natural zeolites, organic carbon, fly ash, zeolites, limestone, activated alumina, apatites, etc. have been tried by many researchers to remove organic and inorganic contaminants. In USA, Canada, and many European countries commercial full-scale and pilot scale PRBs are successfully working. The design and installation of full scale PRBs needs laboratory treatability and dynamic flow column experiments？ The concept of PRB is being applied to treat contaminated surface water in the Katedan industrial area, Hyderabad, India. National Geophysical Research Institute （NGRI）, Hyderabad, India, conducted systematic studies in collaboration with Norwegian Geotechnical Institute （NGI）, Norway, to develop PRB technique to decontaminate the surface water pollution due to industrial effluent. A site assessment study in the Katedan Industrial Area, were carried out and water, soil and sediment from the lakes of the area were found to be polluted with high concentrations of heavy metals like As, Pb, Cr, Cd, Ni, etc. Adsorption studies at NGRI with synthetic samples and in-situ industrial effluent using different reactive media for removing contaminants like arsenic, chromium, cadmium, copper, nickel, lead and zinc have been carried out and yielded satisfactory results. The performance of zero-valent iron and limestone is encouraging in removing As,     

Factors controlling the spatial and temporal variability of dust emissions

New field measurement techniques are allowing researchers to better understand how surficial properties affect the temporal and spatial variability of dust emissions. In this paper we review the current understanding of the dust emission process and present new field measurements that examine how three surface properties： roughness, crust strength, and temporal changes of surface properties affect dust emissions. These data were collected using three unique measurement systems developed by our team. Roughness exerts considerable control on the entrainment threshold and emissions of dust from a surface. We have carried out a series of experiments designed to quantify roughness effects on aeolian sediment entrainment and transport in a shear stress partitioning framework. Our results show that the model of Raupach et al. （1993） provides very good agreement with available data to predict the amount of shearing stress on the intervening surface among roughness elements, relatively independent of their size and distribution. However, element size affects the aeolian sediment transport process beyond that attributable only to the reduction of surface shear stress caused by the roughness. Additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency and potentially dust emissions as well. The effect of crust strength on dust emissions was assessed using a newly-developed pin penetrometer, which can measure crust strength in-situ. Previous researchers suggested that variation in crust strength even within a small area could lead to considerable spatial variability in dust emissions. Our measurements showed that crust strength is highly variable over a scale of centimeters. This variability may help to explain some of the observed scatter in field measurements of dust emissions for what appear to be homogeneous surfaces. Variability of dust emissions in time and space was also evaluated using a new instrument, the Portable In-Situ Wind Erosion Lab （PI-SWERL） developed to measure dust emissions from soil surfaces.